首页> 外文会议>SAE International Powertrains, Fuels and Lubricants Meeting >Numerical Investigation on Effects of Oxygen-Enriched Air and Intake Air Humidification on Combustion and Emission Characteristics of Marine Diesel Engine
【24h】

Numerical Investigation on Effects of Oxygen-Enriched Air and Intake Air Humidification on Combustion and Emission Characteristics of Marine Diesel Engine

机译:富氧空气和进气加湿对船用柴油机燃烧和排放特性的数值研究

获取原文

摘要

In order to meet the increasingly stringent emissions restriction, it is indispensable to improve the combustion and emissions technology of high-speed marine diesel engines. Oxygen-enriched combustion and intake air humidification are effective ways to control pollution from diesel engines and improve combustion of diesel engines. In this study, the combustion and emission characteristics of supercharged intercooled marine diesel engine with humidity ratio and intake oxygen concentration were investigated by using multi-dimensional CFD model. The combustion model was established by AVL Fire code. The combination strategy of intake air humidification and oxygen-enriched combustion were optimized under partial load at 1350 rpm. The simulation results indicate that under kept the constant value of the humidity ratio, the averaged in-cylinder temperature and pressure both increase with the rise of intake oxygen concentration, while the timing of the in-cylinder peak temperature and pressure are increased, the combustion duration got short and CA50 is delayed. Meanwhile, soot emissions are inhibited while the NO_x emissions increase remarkably. Intake air humidification can reduce NO_x emission significantly, whereas it has little effect on soot emissions and indicated power. With humidity ratio growing, both in-cylinder combustion pressure and temperature decrease as well as NO_x emissions. However, the ignition delay increased dramatically. The results reveal that the humidity ratios from 60% to 80% and the oxygen concentration from 22% to 23% can be matched to realize lower Soot-NO_x emissions than the original engine with loss of the indicated power no more than 3%.
机译:为了满足日益严格的排放限制,它是必不可少的,以提高高速船用柴油发动机的燃烧和排放的技术。富氧燃烧和进气空气加湿来自柴油发动机有效的方法来控制污染,改善柴油机的燃烧。在这项研究中,增压中冷船用柴油机湿度比和进气氧浓度的燃烧和排放特性通过使用多维CFD模型研究。燃烧模型是由AVL消防法规定。吸入空气加湿和富氧燃烧的组合策略被以1350rpm部分负载下进行了优化。仿真结果表明,在保持湿度比的恒定值,平均缸内温度和压力都增大与进气的氧浓度的上升,而在气缸内的峰值温度和压力增加时,燃烧的定时持续时间短了CA50和延迟。同时,在排放中NO_x显着提高烟尘排放被抑制。吸入空气加湿可以显著减少NO_x的发射,而其对碳烟排放和指示功率影响不大。随着湿度比增加,无论是在缸内燃烧压力和温度降低以及NO_x的排放。然而,点火延迟急剧增加。结果表明,从60%的湿度比为80%,从22%到23%的氧浓度可以匹配实现低煤灰中NO_x排放比原来发动机与所指示的功率损失不超过3%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号