首页> 外文会议>International Conference on Advanced Mechatronic Systems >A novel sliding mode control for lane keeping in road vehicles
【24h】

A novel sliding mode control for lane keeping in road vehicles

机译:用于公路车辆行车道的新型滑模控制

获取原文

摘要

In this paper, a novel sliding mode (SM) control is developed for vehicle lane keeping. The proposed SM controller can enable the vehicle to track the reference road center-line and yaw direction with zero errors. The idea behind the SM controller are as follows: first, lateral vehicle dynamics system is divided into two subsystems. Lateral position error dynamics system is recognized as a predominant subsystem, while yaw angle error dynamics system is an affiliate subsystem. Then, an SM controller is designed for the predominant subsystem to achieve asymptotical convergence of lateral position error. Since the components related to yaw angle dynamics in the equivalent control input signal of front wheel steering angle have the pole-placement function to yaw angle dynamics, the stability of the affiliate subsystem and asymptotical convergence of yaw angle error finally can be ensured. Thus, the SM controller designed for predominant subsystem can achieve decoupled control for both lateral position error dynamics and yaw angle error dynamics. The excellent performance of the proposed SM control is demonstrated by simulation results.
机译:本文针对车辆行车道开发了一种新型的滑模控制。所提出的SM控制器可以使车辆以零误差跟踪参考道路中心线和偏航方向。 SM控制器的思想如下:首先,横向车辆动力学系统分为两个子系统。横向位置误差动力学系统被认为是主要子系统,而偏航角误差动力学系统是附属子系统。然后,为主要子系统设计了一个SM控制器,以实现侧向位置误差的渐近收敛。由于前轮转向角的等效控制输入信号中与偏航角动力学有关的组件具有偏航角动力学的极点放置功能,因此最终可以确保附属子系统的稳定性和偏航角误差的渐近收敛。因此,为主要子系统设计的SM控制器可以实现横向位置误差动力学和偏航角误差动力学的解耦控制。仿真结果证明了所提出的SM控制的卓越性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号