您现在的位置: 首页> 研究主题> 光束传输

光束传输

光束传输的相关文献在1994年到2022年内共计123篇,主要集中在无线电电子学、电信技术、物理学、自动化技术、计算机技术 等领域,其中期刊论文72篇、会议论文12篇、专利文献193854篇;相关期刊33种,包括浙江师范大学学报(自然科学版)、激光技术、强激光与粒子束等; 相关会议9种,包括全国信息与电子工程第三届学术交流会暨四川省电子学会曙光分会第十四届学术年会、中物院电子技术第八届青年学术交流会、2008'激光技术论坛、2006年二十一世纪中国光电产业发展论坛等;光束传输的相关文献由285位作者贡献,包括吕百达、周国泉、胡巍等。

光束传输—发文量

期刊论文>

论文:72 占比:0.04%

会议论文>

论文:12 占比:0.01%

专利文献>

论文:193854 占比:99.96%

总计:193938篇

光束传输—发文趋势图

光束传输

-研究学者

  • 吕百达
  • 周国泉
  • 胡巍
  • 任志君
  • 伍轩弘
  • 张会兴
  • 张伟
  • 张彬
  • 张海东
  • 曹念文
  • 期刊论文
  • 会议论文
  • 专利文献

搜索

排序:

年份

    • 摘要: cqvip:Tensor超快光束引导技术突破了传统解决方案中的技术瓶颈,成倍提高了光束传输速度,使得可用激光能量能被最大效率地充分利用。激光微加工早已摆脱了加工速度慢的刻板印象,然而实际切割速度的限制因素是光束的传输,而并非有效激光功率。LPKF全新Tensor技术解决了这一制约激光微加工发展的根本性问题。
    • 摘要: 作为3D激光加工技术的先驱,通快(Trumpf)公司除了提供光束光源和光束传输组件之外,还提供各类激光切割机及成套系统解决方案。通快公司先进的TruLaser Cell系列3D激光切制机采用了倍福工业PC技术和EtherCATI/0组件。他们的新一代TruLaser Cell 8030结合了3D激光切割的最大加工可靠性和生产效率。
    • 曾胜财; 任志君; 简荣华
    • 摘要: 根据光束传输的独立性和叠加性原理,利用虚源法计算推导出螺旋马丢高斯光束传输的积分表达式,模拟一种螺旋马丢光束的轴上非傍轴光场分布,得到螺旋马丢高斯光束保留到第三阶的非旁轴修正项,并与傍轴近似结果做对比分析.模拟结果表明,螺旋马丢高斯光束在近距离范围内,非傍轴修正值与傍轴近似值相差较大,但随着传输距离的增加,两者越来越接近.这是通过简单函数叠加来实现对复杂光束研究的方法,在光束传输和光场调制等方面有一定的研究意义.
    • 董永胜; 胡文弢; 金洪震; 钱义先; 任志君
    • 摘要: 为研究准无衍射Lommel-Gauss光束的非傍轴传输,根据光束传播的独立性和叠加性原理,先将Lommel-Gauss光束展开为无穷项Bessel光束的叠加,然后利用虚源法和格林函数法引入一组能够产生Lom-mel-Gauss光束的虚光源点,利用Fourier-Bessel变换理论,通过建立对应的非齐次亥姆霍兹方程,计算得到Lommel-Gauss光束传输的非傍轴严格积分表达式.利用该积分表达式推导给出了Lommel-Gauss光束轴上光场分布的非傍轴修正解析表达式,这为定量计算Lommel-Gauss光束的传输特性提供了方便.
    • 吴琼; 任志君; 李晓东; 杜林岳; 毛和法; 胡海华
    • 摘要: 马丢-高斯光束是近年来被提出的一种准无衍射光束,它包括:第一类(2m+2阶)、第二类(2m+1阶)奇型马丢-高斯光束;第一类(2m阶)、第二类(2m+1阶)偶型马丢-高斯光束.马丢-高斯光束最大的特点是光学形态的多样性.因此,研究马丢-高斯光束的传输特性,使之用于实际有非常重要的意义.利用光束的可叠加原理,以第一类奇型马丢-高斯光束为例,通过定义一组虚光源,计算出了第一类奇型马丢-高斯光束在自由空间传输的积分表达式.利用类似的处理方法,还得到了另外3类马丢-高斯光束的表达式.这一组表达式为精确、定量地计算各类马丢-高斯光束的传输特性提供了方便.%Mathieu-Gauss beams are a kind of quasi non-diffracting beams. Mathieu-Gauss beams had four types,which are respectively odd type Mathieu-Gauss beams of the first kind (2m+2 order) and the second kind (2m+1 order),even type Mathieu-Gauss beams of the first kind (2m order) and the second (2m+1 order). Mathieu-Gauss beams have a variety of optical structures,the propagation characteristics of Mathieu-Gauss beams are especially important for scientific significance and practical value. Based on the principle of superposition beam,the odd type Mathieu-Gauss beams of the first kind was investigated typically. The inte-gral expression of odd type Mathieu-Gauss beams of the first kind propagating in the free space was obtained by defining a set of virtual light sources. By using the similar method,the expressions of the other three kinds of Mathieu-Gauss beams were also obtained. The set of expressions could be used to calculate the transmission characteristics of all Mathieu-Gauss beams accurately and quantitatively.
    • 程秋虎; 王石语; 过振; 蔡德芳; 李兵斌
    • 摘要: Computer simulation is always an important means for studying laser,while laser theory is the basis of simulation.Although the semi-classical laser theory can accurately describe the generation process of laser,its complexity leads to a need of huge resources and time for computation.However,in particular cases,the influence of some factors on the laser system can be neglected.If a simpler model is employed to describe the laser system,the time of simulation can be shortened significantly.In order to simulate the laser system more efficiently,a simulation model of Q-switched solid-state laser is proposed in this paper.In this model,the time-domain function of Q switch is introduced,which represents the modulation of Q switch loss over time.Because the cross section of the Nd:YAG rod is circularly shaped,the resonator eigenmodes are assumed to be a Laguerre-Gaussian beam for simplicity.Then,any other laser beam can be formed by superposition of the eigenmodes of the resonator.These series of resonator eigenmodes are coupled with the rate equations of laser crystals.Finally,the distribution of pump light field inside the laser crystal is approximated as super Gaussian distribution.Based on this physical model,the influence of pump power and pump light field distribution on the output beam of multimode Q-switched solid-state laser is investigated.The simulation results are in good agreement with the experimental data,which explains the validity of the proposed model.For instance,with the increase of pump power,the output power of the laser increases,but the overall slope efficiency decreases.This is because the diffraction loss δm,n of the lower order mode is less than the diffraction loss of higher order mode.When the pumping power increases,the higher order mode that starts to oscillate has lower utilization efficiency of pump energy.Therefore,the overall slope efficiency of the laser is reduced.In order to analyze the mode competition in the multimode Q-switched solid-state laser more comprehensively,the processes of laser pulse generation,relaxation oscillation and continuous oscillation are calculated as one full cycle.The laws of pulse power and beam quality factor versus time are obtained.For example,the maximum instantaneous output power of the relaxation oscillation is about 30 times the steady continuous output power.This law has a certain reference value when analyzing the damage threshold of laser optical element.In the pulse generation stage,the beam quality factor is close to 1,which explains the fact that the pulse field composition is nearly the fundamental mode of the laser.In the relaxation oscillation,the value of the beam quality factor changes irregularly with time,because mode competition is in a non-equilibrium state at this time.When stable continuous oscillation occurs,the mode competition achieves dynamic equilibrium,which means that the proportion of each mode is no longer changed in the output light field.%仿真计算一直是研究激光器的重要手段,而激光理论是仿真计算的基础.虽然半经典激光理论能够精确地描述激光的产生过程,但是其复杂性导致仿真需要庞大的计算资源和计算时间.为了能够更加高效地对激光器进行仿真,提出了一种调Q固体激光器的仿真模型.基于此模型,研究了影响主动调Q激光产生过程的因素.这些因素包括抽运功率、抽运光分布和模式竞争.仿真计算结果与对照实验测量数据相符合,说明了模型的有效性.
    • 刘亮; 黄秀军; 徐红艳; 宋镇江; 石德乐; 王姗姗
    • 摘要: 设计了由负轴棱锥、折射率匹配液、正轴棱锥组成的浸液式组合轴棱锥.理论分析表明:浸液式组合轴棱锥系统与传统轴正棱锥等效,同时可有效提高最大无衍射传输距离;系统产生的最大无衍射距离与负轴棱锥的底角、折射率,匹配液的折射率,正轴棱锥的底角和折射率这五个量有关,极大地增加了系统设计的灵活性,拓展了光学材料的选择范围,降低了光学元件的加工难度.
    • 摘要: 欧洲在地球轨道即将建成利用激光光束传输太空数据信息的"高速公路网"。网络的一个重要环节是从哈萨克斯坦拜科努尔发射的一颗通信卫星。卫星将使用激光通讯来收集其他航天器拍摄的地球图像,然后将其传到地面。新科技的好处之一是把有关自然灾害的信息更快传给紧急救援人员,比如洪水和地震情况。
    • 张磊; 陈子阳; 崔省伟; 刘绩林; 蒲继雄
    • 摘要: 本文介绍了非均匀部分相干光束的概念,并用数值模拟的方法详细研究了其在自由空间传输后的变化。研究结果表明,经过自由空间传输后非均匀部分相干光束会发生不同于传统相干模型光束的显著变化。这种变化和光束传输距离、光源空间相干度分布、光源光强分布密切相关。经过传输后,源平面自相干附近点的空间相干度发生突变,在短距离传输过程中源平面高相干区域的空间相干度会降低,接收面各点的空间相干曲线不再相同,随着传输距离增加,非均匀空间相干度会逐渐趋于均匀。%This paper introduces the concept of non-uniform partially coherent beams and investigates the spatial coherence change during beam propagation. Results show that non-uniform spatial coherence would make significantly changes during propagation, which is completely different from the classical beams. These changes have relationships with propagation distance, spatial coherence, and intensity distribution of the source. The points adjoining self-coherence area would mutate when beams propagate from the source;the high coherence area in the source may decrease after the beams propagate a short distance. Curves of spatial coherence would not overlap after propagation, while the spatial coherence tends to be uniform with increasing propagation distance.
    • 张晓华; 王晓洁; 张骥
    • 摘要: 在过去几年的工作中,在国内外已有研究工作的基础上结合本实验室工作,针对天光一号MOPA系统,考虑了24种粒子、120种反应通道,建立了最基本的零维、一维数值模拟程序,对电子束泵浦的KrF准分子激光器的反应动力学过程进行了研究;通过该模型,得到KrF激光放大过程中以下方面的信息:增益区内某一位置、某一时刻的上能级粒子数分布情况;KrF激光脉冲在增益区内传输到不同位置时的能量变化情况;经过放大器放大后输出脉冲的波形、能量等;根据动力学反
  • 查看更多

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号