deposit

摘要： 1.Objective Skarn iron ore deposit is the principal source of highgrade iron reserves in China,contributing about 11% of the national iron reserves and about 60% of the high-grade iron reserves.Therefore,the study of typical skarn iron ore deposits will provide a better understanding of the formation and exploration of high-grade iron deposits in China.The Luxi area is one of the most representative and important skarn iron ore fields in China.

摘要： 1.Objective Because of the characteristics of multistage mineralization,long duration,relatively new age,and complicated occurrence of ore minerals,dating of sandstone-type uranium deposits has been a challenging problem.For a long time,the whole-rock U-Pb isochronal method has been used in the dating of sandstone-type uranium deposits,but its accuracy has been questioned by experts.

摘要： Objective The Hengjian uranium deposit is a typical hydrothermal deposit in the Xiangshan uranium ore field.The uranium mineralization ages of the Xiangshan deposits are poorly constrained,and only a few mineralization ages using the pitchblende U–Pb method have been published.These ages are commonly discordant and dispersed for abundant inclusions and an open U–Pb system.Zircon grains after strong hydrothermal alteration are usually characterized by high common Pb contents,and their U–Pb isochron ages recorded the hydrothermal alteration event without interference of common Pb components.The Hengjian gray/grayish-green granite porphyry experienced strong alteration by hydrothermal fluids during the pervasive uranium mineralization in the Xiangshan uranium ore field.Uranium mineralization in the Hengjian deposit may had different stages,and strong hydromicatization alteration occurred at a relatively early stage.Their altered zircon U–Pb isochron ages possibly represent relatively early mineralization age of the Xiangshan uranium deposits.Altered zircon grains from the Hengjian granite porphyry were analyzed using the secondary ion mass spectrometry(SIMS)U-Pb method in this study,and U–Pb isochron ages were measured to constrain the relatively early mineralization age of the Hengjian uranium deposit.

摘要： Objective A set of REE-rich clay rocks is formed at the top of the Emeishan basalt in the eastern Yunnan-Western Guizhou area,accompanied by Nb,Zr,Ga.It is a new type of REE deposit and has great resource potential.This paper introduces its metallogenic conditions and element occurrence states,discusses the genetic mechanism.

摘要： Objective The Beiya super-large Au-rich porphyry deposit(304 t Au,2.4 g/t Au)is located within the western Yangtze craton,to the southeast of the Sanjiang Tethyan Orogen(Fig.1).The ore-forming porphyry is adakitic,characterized by high Sr/Y and La/Yb ratios coupled with low Y and Yb contents,and is generally thought to be derived from partial melting of thickened mafic lower crust.The lower crust underneath the western Yangtze craton is mainly composed of ancient crust with Archean ages,juvenile crust resulting from the Neoproterozoic subduction(740–1000 Ma),and late Permian juvenile crust related to the Emeishan mantle plume.Which lower crustal end-member has played a critical role in genesis of the Beiya ore-forming porphyry can be constrained by zircon U-Pb ages of amphibolite xenoliths hosted in the ore-forming porphyry,because these xenoliths represent direct samples of the source.In this study,we present new zircon U-Pb ages of these amphibolite xenoliths to have insight into the nature of the Beiya adakitic porphyry source.

摘要： The Halo copper-molybdenum prospect is a porphyry system in Ratanakiri province, northeastern part of Cambodia. There is only one research was carried out on this prospect about geological mapping and short wave infrared (SWIR) spectroscopy on alteration mineral identification. The purpose of this research is to confirm the deposit type from previous Angkor Gold’s report and find the centre of porphyry deposit based on characteristic of intrusive rocks at surface and subsurface, characteristics of the intrusive rocks and alteration lithogeochemistry of intrusive and volcanic rocks by using Pearce Element Ratio (PER) analysis. PER analysis was used to examine the nature and extend of the alteration halos in the porphyry Halo copper-molybdenum prospect. The intrusive rocks and volcanic rocks in Halo, range from diorite to granite (quartz feldspar porphyry) in composition as well as dacite to trachyandesite (andesite porphyry) in composition, respectively. They were formed in a subduction-related tectonic setting, likely a volcanic arc. Trace elements spider diagrams were normalized to primitive mantle display strong enrichment in large-ion lithophile elements such as Rb, Ba and K and depletion in some high-field strength elements such as Nb and Ti, suggesting magmas generated in a subduction-related tectonic setting. PER analysis indicates a moderate to high degree of sericite alteration of dacites, quartz feldspar porphyries, andesite porphyries and granodiorite porphyries. Moreover, three alterations in the Halo prospect such as potassic (secondary K-feldspar and biotite), phyllic (sericite) and propylitic (epidote) alteration were identified, which are consistent with petrography analysis. The potassic alteration zone is vectoring center of the hydrothermal system which may represent the locus of mineralization. Therefore the geochemical signature of potassic alteration within the quartz feldspar porphyry, andesite porphyry and granodioriteporphyry with high grad of copper ranges up to 2670 ppm and molybdenum ranges up to 5297 ppm represents a character for further exploration in the Halo porphyry copper-molybdenum prospect.

摘要： The Olserum deposit located in Sweden hosts an indicated mineral resource of 4.5 million tonnes at 0.6% total rare earth oxides (TREO), exhibiting a relatively high proportion of heavy rare earth elements (HREE). The mineralogy and beneficiation of a composite drill core sample from the Olserum deposit were studied. Monazite and xenotime were found by the mineralogical analyses to be the target minerals for beneficiation of REEs and most (96.9%) of REEs in the ore are carried by monazite (68.5%) and xenotime (28.4%). Because xenotime carries 84.7% of heavy REEs (Y, Gd, Dy) in the ore it is more valuable mineral than monazite. A beneficiation process was developed which includes grinding, wet low intensity magnetic separation (WLIMS) for removal of magnetite and REEs flotation consisting of one stage of roughing and two stages of cleaning. Selective flotation collector of REE minerals and suitable grinding size of feed material were determined by testwork. The REE concentrate and tailings were chemically and mineralogically characterized. The studies of process mineralogy showed that the REE-bearing minerals, monazite and xenotime, and apatite were successfully enriched from the concentrations of 0.6%, 0.31% and 2.6% in the feed to those of 17.0%, 8.9% and 65.0% in the concentrate with the recoveries of 79.0%, 81.3% and 71.0%, respectively.

摘要： One of the most important useful and widely abundant industrial minerals in the world is the clay minerals. Their applications in various industries are dependent on their properties. In this study, the mineralogical and physico-chemical properties of RahinSho (RC), Major Porter (MP), Wereng camp (WC), Kwi (KC) and Naraguta (NC) clay deposits in Plateau State, Nigeria were investigated to evaluate their potentials for some industrial uses. The x-ray diffraction studies revealed the kaolins as the dominant clay minerals in all the samples. The non-clay minerals found were quartz and muscovite. The chemical analyses by x-ray fluorescence also indicated that the silica (SiO2) values of the samples ranged from (41.20 - 62.26)% while the alumina (Al2O3) range was (17.25 - 37.15)%. Some considerable amounts of impurities found were Fe2O3 (0.43 - 27.52)%, TiO2 (0.05 - 3.28)%, K2O (0.13 - 3.01)%. The oxides of Na, Ca and Mg were within acceptable limits in the clays for most purposes. The loss on ignition ranged from 4.30% - 12.43%. The physical properties investigated were particle size distribution that contained heavy clay-size materials ranging from 67.88% - 91.88%, plasticity index had range of values from 15.90% - 33.68%, and drying and firing shrinkages were 1.10% - 2.22% and 1.65% - 4.49% respectively. All the samples attained a temperature of 1500°C without fusion except Naraguta clay that fused at 1300°C. At the temperature of 1200°C, RC, MP and WC clays retained their natural colours of white and near-white respectively, while KC and NC clays changed colours from orange pink and light brown to moderate pink and moderate reddish brown respectively. These results compare very well with several clays elsewhere. Based on these characteristics, the clays were observed to be potentially suitable for the production of paints, tiles, ceramics, refractories, sanitary wares and clay bricks. Minimal processing will increase the potential of RC and MP to meet up with specification for paper, fertilizer and/or pharmaceutical uses.

摘要： The peraluminous rhyolite that forms Round Top Mountain (approximately 375 m high × nearly 2 km in diameter), near Sierra Blanca, Hudspeth County, west Texas, USA, is enriched in yttrium and heavy rare earth elements (YHREEs), as well as Li, Be, U, Th, Sn, F, Rb, Cs, Nb, and Ta. Texas Mineral Resources Corp. (USA) proposes to release the YHREEs from their unique yttrofluorite host via heap leaching with dilute sulfuric acid. The inexpensive process also releases portions of valuable byproduct Be, Li, and U from accessory minerals amid the insoluble feldspars and quartz that comprise 90% - 95% of the surface-exposed rhyolite mountain. The objective of this study is to determine the consistency of mineralization grade, an important consideration in mine planning and preliminary economic analysis. The method is to plot elemental analyses of Y, Dy, Ho, Tm, Yb, Ce, Pr, Nd, Eu, Gd, Tb, U, and Nb from more than 1400 reverse circulation cuttings taken from 64 exploration drill holes against sample depth. The result of inspection of the plots reveals a remarkably homogeneous distribution of minor and trace elements throughout the sampled portion of the massive, 1.6-billion-tonne laccolith. The plots drive the conclusion that Round Top mine feedstock should remain constant for the life of the mine (multiple decades). Thus mining mechanics could be optimized at the start of operations and not require expensive later changes. The physical and chemical design of the heap leach and recovery and purification of target elements from pregnant leach solution also could be perfected during early development.