薄膜表面
薄膜表面的相关文献在1988年到2022年内共计645篇,主要集中在化学工业、物理学、轻工业、手工业
等领域,其中期刊论文74篇、会议论文5篇、专利文献334652篇;相关期刊61种,包括警察技术、军民两用技术与产品、技术与市场等;
相关会议5种,包括2008国际粉体技术与应用论坛暨全国粉体产品与设备应用技术交流大会、第五届国际有序金属间化合物及先进材料国际会议、华东三省一市第三届真空学术交流会等;薄膜表面的相关文献由1336位作者贡献,包括陈忠斌、顾正忠、鲁从华等。
薄膜表面—发文量
专利文献>
论文:334652篇
占比:99.98%
总计:334731篇
薄膜表面
-研究学者
- 陈忠斌
- 顾正忠
- 鲁从华
- 张涛
- 刘焕明
- 梅军
- 刘斌
- 彭林法
- 徐东
- 易培云
- 来新民
- 王家俊
- 邓宇君
- 马丽娜
- 不公告发明人
- 俞秋燕
- 刘鹏
- 孙浩亮
- 宋忠孝
- 李杰
- 邢力
- 马飞
- 魏明
- 何绪林
- 刘江
- 叶勤燕
- 吴韬
- 庞来兴
- 廖成
- 李克贵
- 李志云
- 杨吉军
- 梅雪松
- 汪娟娟
- 王广欣
- 王恪典
- 王文君
- 王旭
- 肖勇
- 袁青
- 赵万芹
- 郑伟
- 陈俊鸿
- 陈耀
- 陈铭军
- 黄楠
- 万国江
- 侯忞辰
- 刘媛媛
- 刘建
-
-
-
-
俞秋燕
-
-
摘要:
聚乳酸(PLA)采用富含淀粉的天然植物为原料,经过现代生物技术发酵聚合而成.PLA制品在使用后可降解为H2O和CO2,对环境没有危害,克服了传统塑料难降解的弊病.但是,PLA薄膜在阻氧性能方面存在明显不足.本论文选用绿色环保的羟丙基甲基纤维素(HPMC)、聚乙烯醇(PVA)、单宁酸(TA)以构建涂层的形式,解决PLA的阻氧问题.首先以HPMC与TA为原料,采用层层组装法(LBL)构建HPMC/TA涂层.随后以PVA与TA为原料,采用LBL法构建PVA/TA涂层.
-
-
-
路晓翠;
周炳卿;
张林睿;
张娜
-
-
摘要:
通过射频等离子体增强化学气相沉积(RF-PECVD)技术与退火处理制备多晶硅薄膜,研究了衬底和退火温度对所制薄膜的结构及光学性质的影响。本次试验最大的晶粒尺寸是在衬底温度为250°C获得,考虑薄膜表面的质量,最佳的退火温度为635°C,衬底温度为225°C,在玻璃衬底形成的晶粒大于50 nm,光学带隙为1.5 eV。结果表明:衬底温度影响着薄膜中氢含量以及相关的缺陷。随着退火温度的升高,晶化率的提高,光学带隙先减小后增大。%Polycrystalline silicon thin films were prepared by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD)with additional annealing treatment. The influence of substrate temperature and annealing temperature on the structure and optical properties of silicon thin films were investigated. The experimental results show that the largest grain size is obtained with annealing temperature of 635°C and substrate temperature of 250°C. But considering the film surface quality, the optimal substrate temperature is 225°C. On this condition, the grain size of polycrystalline silicon is more than 50 nm, and band gap is 1.5 eV with glass substrate. And the substrate temperature has an important impact on the hydrogen content in thin films and related film defects. With the annealing temperature increasing, the crystalline volume fraction increases, and the optical band gap decreases firstly and increases subsequently.
-
-
-
-
公发全;
文静;
谭彦楠;
牟宗信;
周徐洋;
刘万发;
董闯
-
-
摘要:
为解决大口径非晶金属第一镜实现难题,在研究块体金属玻璃Co61.2 B26.2 Si7.8 Ta4.8材料基础上,采用金属玻璃块体材料制作拼接成溅射靶材,通过非平衡磁控溅射镀膜方法,实现了 Co61.2 B26.2 Si7.8 Ta4.8非晶金属薄膜第一镜。研究结果表明:通过成分设计及合成靶材的设计,能够实现与块体金属玻璃具有相同光学特性的非晶薄膜第一镜;通过Cr成分改进,能够进一步提高非晶金属薄膜第一镜在可见光波段的光谱反射率。%To solve the problem of achieving the large diameter amorphous metallic film first mirrors,based on the research of Co61.2 B26.2 Si7.8 Ta4.8 metallic glass,splicing the amorphous glass bulks together as the target and using bulk amorphous glass as the sputtering material,by unbalanced magnetron sputtering coating method,the Co61.2 B26.2 Si7.8 Ta4.8 amorphous metallic film first mirrors was realized.The research results show that with designing the composition and synthesis target-material,amor-phous film first mirrors having the same optical properties with BMGs can be achieved;with coating Cr on the amorphous film, the spectral reflectivity of amorphous metallic film first mirrors in visible spectrum can be further increased.
-
-