恒加试验
恒加试验的相关文献在1993年到2022年内共计62篇,主要集中在一般工业技术、机械、仪表工业、自动化技术、计算机技术
等领域,其中期刊论文53篇、会议论文3篇、专利文献202500篇;相关期刊39种,包括中国商界、内江师范学院学报、三明学院学报等;
相关会议3种,包括2010年全国机械行业可靠性技术学术交流会暨第四届可靠性工程分会第二次全体委员大会、2009年全国机械可靠性技术学术交流会暨第四届可靠性工程分会成立大会、中国工程热物理学会传热传质学学术会议等;恒加试验的相关文献由86位作者贡献,包括茆诗松、冯雪峰、张志华等。
恒加试验—发文量
专利文献>
论文:202500篇
占比:99.97%
总计:202556篇
恒加试验
-研究学者
- 茆诗松
- 冯雪峰
- 张志华
- 梁红琴
- 刘瑞元
- 王煜
- 李刚
- 汤银才
- 蔡金燕
- 付永领
- 刘昌红
- 刘玲慧
- 孙利民
- 师义民
- 武东
- 王炳兴
- 田云霞
- 管强
- 邓永权
- 钱毅
- 韩雷
- 俞卫博
- 冯文雅
- 刘天民
- 刘婷
- 刘小华
- 刘斌
- 刘海锋
- 刘立喜
- 叶尔骅
- 周学清
- 周晓东
- 周玉辉
- 夏爱生
- 姚业辉
- 孙灵芳
- 宣兆龙
- 张世富
- 张卫华
- 张国志1
- 张士峰
- 张民悦
- 张莉
- 张青
- 徐志明
- 徐磊
- 曹渊
- 朱光涛
- 李和成
- 李玲
-
-
-
鲍志晖;
李玲
-
-
摘要:
针对Weibull分布场合下双应力恒加试验,在给出参数的点估计及相关定理的前提下,讨论了正常应力水平下形状参数、特征寿命、可靠寿命和加速系数等可靠性指标的一种区间估计方法,并通过例证说明了相对于利用近似正态性的区间估计方法,文中所给出的方法在精度上有所提高.
-
-
朱光涛;
马永忠;
马志伟;
刘小华
-
-
摘要:
为解决元器件材料级产品恒定应力加速试验导致评估结果可信度不高的问题,考虑到节省成本和试验时间,采用旧弹药作为试验样品进行整机加速试验。通过对恒加试验寿命分布类模型的分析、环境因子的折算和突发型失效模式的统计,得到了旧弹药恒加试验的寿命模型,并进行了应用,为旧弹药整机试验提供了一种可靠性模型,能较好地帮助预测弹药寿命。%To solve the problem of low credibility of the assessment results of constant stress accelerated test of component materials class products and to economize the cost and test time, the authors use old ammunition as test sample for machine accelerated test.Through the analysis of the life distribution model test constant,translation of environmental factors and burst-type failure mode statistics, the authors obtain a life model for constant accelerated test of old munitions,and put into application the model,which proves to be a reliability model for the old ammunition machine test and better predicts the life of ammunition.
-
-
王耀冬;
俞卫博;
宣兆龙;
王绍山
-
-
摘要:
In reliability assessment of initiating explosive device storage, aimed at the problem of general data processing method of constant stress accelerated life test, which ignore the initiating explosive device is not new, the data processing method based on equivalent storage stress was put forward. The methods convert the storage time to test time under each stress of constant stress accelerated life test by equivalent and superposition. Then, the maximum likelihood estimation of parameters were estimated according to the final test time. An analysis and comparison shows that, this method has higher accuracy to estimate storage reliability of initiating explosive device, which has been stored under certain stress and time.%在火工品储存可靠性评估中,针对恒加试验一般数据处理方法忽略火工品并非新品的问题,提出了基于储存应力折算的数据处理方法.通过等效和叠加,将储存应力下的储存时间折算为恒加试验各应力水平下的试验时间,并以此进行参数的极大似然估计.实例分析表明,该方法在评估储存应力和储存时间已知的火工品储存可靠性时,具有更高的准确性.
-
-
刘斌;
师义民;
蔡静;
王瑞兵
-
-
摘要:
线性加速模型常用于恒定应力加速寿命试验的统计分析,这与实际不完全相符.本文建立幂函数加速模型,给出了不同恒定加速应力水平间寿命分位数的关系,利用最小二乘法估计了加速模型的参数及特征标系数向量,从而实现不同应力水平间寿命数据的相互转换.采用Dirichlet过程先验,分别在完全数据情形和截尾数据情形下,得到可靠度函数的后验分布与非参数贝叶斯估计,并证明了后验估计的一致性.最后,通过一个金属氧化物半导体电容寿命实例说明了所建模型的效果.
-
-
-
张莉
-
-
摘要:
针对分组数据情形,研究其参数估计的文献甚是少见.鉴于如此,这篇文章探讨了广义指数分布在恒加试验中,基于分组数据的参数估计问题,并利用EM算法给出了参数估计的显性表达式,最后通过Monte Carlo模拟说明了估计方法的有效性和可行性.
-
-
束秀梅;
张世富;
刘天民;
罗媛媛
-
-
摘要:
在国防武器设备和民用工业等领域,高可靠、长寿命产品被大量研发和生产,因而可以提前暴露该类产品薄弱环节的加速寿命试验技术得到了广泛研究和应用。介绍了加速寿命试验技术常用的试验类型和寿命分布,阐述了基于不同寿命分布的加速寿命试验数据统计方法,对新兴的步降应力加速寿命试验技术和加速寿命试验优化设计方法的研究状况进行了总结和分析,对未来加速寿命试验技术在军用后勤装备领域的研究进行了展望。% With the development of science and technology,products of high credibility and long lifetime have been largely re-searched and manufactured in the industry of weapon and civil products. The characteristics of the products require effective and accu-rate longevity evaluation,and the related technologies are in urgent demand. So accelerated life testing(ALT)technology is widely re-searched and utilized,which can disclose the weakness of high credibility and long lifetime products ahead of schedule. The paper first introduces the common experiment methods and lifetime distribution of ALT technology,then expatiates on the ALT data statis-tical ways based on different lifetime distributions,and analyzes and summarizes the progresses of the rising step-down-stress ALT technology and optimized designs of ALT. Finally,the paper gives an anticipation of the advancement of ALT technology in the area of logistics equipment.
-
-
杨俊丽1;
张国志1
-
-
摘要:
本文研究了恒加试验下,基于最小路径描述的复杂系统可靠度的估计问题。假设每个子系统的寿命分布为指数分布,且在恒加试验下,得到的每个子系统的寿命样本为定数截尾样本,在此条件下,本文给出了复杂系统的可靠度的估计及其渐近分布。
-
-
谭伟;
师义民;
鄢伟安
-
-
摘要:
基于定数截尾试验,研究恒加试验下Pareto部件的可靠性分析问题.利用经典方法和Bayes方法,给出了部件参数的极大似然估计、Bayes估计和逆矩估计.验证了极大似然估计和Bayes估计的等价性.结合加速寿命方程,推导出Pareto部件的可靠度、失效率的估计值.最后,通过仿真比较与分析,建立了Pareto部件的可靠性评估方法.%Under the type- I censoring life test? The paper give the reliability analysis based on content-stress accelerated life test with Pareto component. MLE, Bayesian estimation and IME are given with both classical method and Bayesian method. MLE and Bayesian estimation are proved to be equivalent. Combined with accelerated life equation,the estimation of reliability function and failure rate are derived out. At last, with the help of simulation analysis, the reliability assessment method of Pareto component is established.
-
-
-
-
杨善让;
郭锋;
王恭;
孙灵芳;
徐志明
- 《中国工程热物理学会传热传质学学术会议》
| 2003年
-
摘要:
为缩短渐近污垢试验时间,本文定义了污垢寿命,利用恒定应力加速寿命试验(简称恒加试验),基于定数截尾指数寿命统计分析方法,求得加速系数a,b近似最小二乘估计,然后由加速模型求得在正常应力水平下的平均寿命估计.文章给出了计算实例.结果表明,对渐近型污垢热阻进行加速试验是可信、可行的,这对污垢试验研究具有重要价值.