循环指令
循环指令的相关文献在2001年到2022年内共计83篇,主要集中在金属学与金属工艺、自动化技术、计算机技术、机械、仪表工业
等领域,其中期刊论文63篇、会议论文2篇、专利文献193484篇;相关期刊49种,包括职业技术、城市建设、海峡科技与产业等;
相关会议2种,包括低碳智能 持续创新——煤矿机电一体化新技术2014年学术年会、第3届制造业自动化与信息化学术交流会暨制造业自动化与网络化制造系统集成学术交流会等;循环指令的相关文献由137位作者贡献,包括A·J·法希、B·L·托尔、E·奥兹图科等。
循环指令—发文量
专利文献>
论文:193484篇
占比:99.97%
总计:193549篇
循环指令
-研究学者
- A·J·法希
- B·L·托尔
- E·奥兹图科
- G·M·沃尔里齐
- J·D·吉尔福德
- M·C·戴维斯
- M·G·迪克森
- M·洛克西金
- S·P·米莱克斯
- V·戈帕尔
- W·K·费格哈利
- A·J·希格哈姆
- M·G·佩尔金斯
- 冯志刚
- 周文超
- 张荣
- 景蔚亮
- 朱永丽
- 江洪
- 王抗旱
- 田超
- 管华超
- 肖善华
- 赵云琪
- 迈克尔·德怀尔
- 钟如全
- 闻军会
- 陈邦明
- 鲁淑叶
- E·C·阿韦洛
- F·M·佩雷斯
- J·P·丹尼尔斯
- K·S·查塔
- K·W·延
- LI Chen
- M·A·霍华德
- R·C·肖哈恩
- R·S·吴
- 产文良
- 何四平
- 何建国
- 何成文
- 何炎祥
- 余英良
- 余轶
- 冯丽娟
- 冯俊
- 冯旭强
- 冯桂香
- 凌明
-
-
刘国玺;
郭辉;
田辉;
沈勇
-
-
摘要:
起落架油针作为半主动控制系统的关键零部件,尺寸精度高,加工难度大,其质量的符合性直接关系到起落架着陆接地的平稳性。在对某型号起落架油针径向油槽采用加工中心T型刀侧向对称铣削试加工时,试件无法满足对称度要求,为降低切削应力影响,选定高精度S45数控坐标磨床进行轮廓铣削加工,其自动计算余量运动轨迹功能可以较好地控制切削进给,保证工件尺寸公差。S45数控坐标磨床可应用CAM软件实现径向油槽轮廓的轨迹编程,经试件验证零件尺寸合格。为高效使用设备功能,对坐标磨床的孔、轮廓铣削原理进行了详细阐述。技术人员可以根据数控代码差异自行定制后处理。坐标磨床相关知识的讲解及油针工艺方案的改进,对其功能拓展起到了抛砖引玉的作用。
-
-
-
张宝强
-
-
摘要:
kuka机器人已经广泛地应用到了各行各业中,主要应用与焊接、装配、搬运和码垛等.Kuka机器人有专用的码垛工艺包,本文讲解用一般的指令及循环指令编写6轴kuka机器人码垛程序.本文首先介绍了机器人码垛基本流程、kuka机器人循环指令、kuka机器人点数据类型及变量名称,在此基础上进行了kuka机器人的循环指令码垛编程探索.
-
-
-
贾晓飞;
殷菲菲;
王传辉
-
-
摘要:
To design a low cost and high efficiency software,which can be used to automatically calculate the path node of turning cycle,AUTOCAD pictures are storaged with the unique data structure.The stepped shafts are composed of ordinary rotators and all profile node informations are given by G71 / G72 chip cycle instruction.This paper uses programming method to make the description and design the data structure of the rotators and stepped shafts.Based on the data structure above,G code contains the data of the boundary parameters which are used to convert the interpolation nodes.Based on all above,it proposes a method which is used to extracte the code from the G boundary contour.The example indicate that the method is good one which is used to extracte the boundary contour.%为设计一套价格低廉、效率高的专门面向木质零件加工的自动计算车削节点软件,从AUTOCAD图形是由数据结构储存、阶梯轴都是由普通回转体构成和G71/G72切屑循环指令给出轮廓的全部节点信息出发用编程的方法进行描述,设计了回转体的数据结构和阶梯轴数据结构等,依据上述数据结构对G代码中包含的回转体边界参数数据进行插补节点转化,提出一种从G代码提取边界轮廓的方法.实例验证,该方法性能良好,提取后的边界效果很好.
-
-
鲁淑叶
-
-
摘要:
Taking orifice chamfering as the research object,in understanding the macro-program processing method of FANUC 0i system,proposes a method of write orifice chamfering NC macro program.Based on orifice chamfering tool and tool path analysis,on the basis of using the macro-program directive of FANUC 0i system extension,developed orifice chamfering machine cycle instructions.Practice shows that the method can satisfy on the NC milling machine processing orifice chamfering production requirements.This instruction to achieve the desired results at the same time,simplify the algorithm and the programming process,it has been verified by the actual effect is good.%以孔口倒角为研究对象,在深入了解了FANUC 0i系统的宏编程处理方法后,提出一种编写孔口倒角数控宏程序的方法.在对孔口倒角的刀具及刀具轨迹分析的基础上,利用FANUC 0i系统的宏编程指令扩展功能,开发了孔口倒角加工循环指令.实践表明,该方法能满足在数控铣床上加工孔口倒角的生产要求,该指令达到了预期的结果,简化了算法以及编程的过程,经实际验证效果良好.
-
-
唐小会;
吉方;
陈华;
黄文;
郑永成;
罗清;
何建国
-
-
摘要:
According to the MRF process characteristic,a set of control system of the PKC-1000P2 MRF machine with double polishing heads was constructed which was based on the HNC-818B and the S7-300.The component,functions and software architecture of the control system were introduced.The control software of the double cycle systems was developed with STEP7.The human-machine interface software of the double cycle systems was developed with the Wincc Flexible 2008.The special graphic human-machine interface software was developed using VC6.0 and was integrated seamlessly into the HNC software.And the canned cycle instructions of the special technology were realized.%根据磁流变抛光工艺特点,以华中HNC-818B型数控系统和S7-300为基础平台,构建了PKC-1000P2磁流变抛光机床控制系统.介绍了机床控制系统的组成、功能、软件架构.用STEP7开发了循环系统控制软件,用Wincc Flexible 2008开发了双循环系统人机交互界面,用VC6.0开发了双抛光头专用图形化HMI软件并与华中数控系统无缝集成,并开发了专用工艺固定循环指令.
-
-
-
王超宇;
曹著明
-
-
摘要:
近年来,海德汉(HEIDENHAIN)ITNC一直是公认的最适合钻、铣、螺纹、铿、加工的数控机床和加工中心的控制系统,简单的操作为人们提供了大量的便捷.本文通过研究数控操作系统ITNC530的钻孔循环程序,对该系统一系列循环程序的钻孔工作原理及执行过程进行了深入研究,进而实现在加工过程中提高工作效率,大大缩短工件的加工时间.
-
-
-
苏振亮
- 《低碳智能 持续创新——煤矿机电一体化新技术2014年学术年会》
| 2014年
-
摘要:
数控加工中对零件某一部分的形状进行反复切削时使用子程序编程效果较好,可以缩短程序编制时间且占用的存储空间小.但是对于部分形状相似的不同零件来说,子程序的通用性较差.宏程序不仅具有子程序的特点且通用性强.使用加工中心对零件的孔系加工时,采用只编一个宏子程序并对主程序稍加修改的方法对所有的孔系及内螺纹进行加工,实际切削验证,该方法的可行性高,使用方便,如再对机床系统参数稍加修改便可与机床配备的固定循环指令相同.
-