您现在的位置: 首页> 研究主题> 干涉滤光片

干涉滤光片

干涉滤光片的相关文献在1981年到2023年内共计134篇,主要集中在无线电电子学、电信技术、物理学、机械、仪表工业 等领域,其中期刊论文74篇、会议论文10篇、专利文献289226篇;相关期刊56种,包括中国科技投资、地学前缘、计量技术等; 相关会议9种,包括全国第二届近红外光谱学术会议、第五届全国温度测量与控制技术学术会议、第四届全国光学学术会议等;干涉滤光片的相关文献由249位作者贡献,包括周东平、尼科尔·多勒内·谢内斯、川合敏光等。

干涉滤光片—发文量

期刊论文>

论文:74 占比:0.03%

会议论文>

论文:10 占比:0.00%

专利文献>

论文:289226 占比:99.97%

总计:289310篇

干涉滤光片—发文趋势图

干涉滤光片

-研究学者

  • 周东平
  • 尼科尔·多勒内·谢内斯
  • 川合敏光
  • 广瀬真树
  • 朱兵
  • 李冬冬
  • 李金宗
  • 柴山胜己
  • 王至海
  • 笠原隆
  • 期刊论文
  • 会议论文
  • 专利文献

搜索

排序:

年份

    • 汪中; 陈景标
    • 摘要: 激光原子钟基于相干布居数囚禁(CPT)和激光器模式锁定的基本原理,其谐振腔内仅有两个模式可以振荡,而且这一设计可以使两个纵模振荡频率与特定工作原子的跃迁频率相等,且相互锁定。而且由于激光谐振腔内插入的干涉滤光单元和CPT单元的双重作用,使两个模式的频率间隔精确等于工作原子的基态超精细结构跃迁频率,并且在谐振腔模式中具有最高增益。通过对激光器腔长、增益,以及腔内插入单元的稳定控制,以此方法建成的激光器将有两个稳定的纵模输出,而两纵模之间的拍频将精确等于CPT系统工作原子的基态超精细能级的跃迁频率。直接检测两个纵模的拍频,就可以获得高稳定度的标准频率输出。而且由于其模式锁定过程是一个物理的自动牵引锁定过程,不再像一般原子钟那样依赖于锁定电路和对原子跃迁信号的探测和识别。因此有望获得更高的稳定度。其标准频率的信号强度,信噪比也会大大高于以往方法产生的原子钟输出信号。
    • 张蕊
    • 摘要: The standard substances of dielectric interference filter prepared in this project included3 filters with different nom-inal wavelengths(thickness,2-3 mm). Based on different spectral neutral metal films,their nominal wavelengths were about 450 nm,550 nm and670 nm,respectively, which were used to detect wavelength error and repeatability of the spectral photometer. Filters were determined by a spectrophotometer,which was traced to the natural standard of a low-pressure quartz mercury lamp. According to JJF1343-2012 General Principles and Statistical Theories for the Determination of Standard Substances and JJG812-93 Verification Regulation of Interference Filters,the research on the standard substances for dielectric interference filter was completed through the homogeneity test and stability assessment of filters and the uncertainty evaluation of the wavelength meas-urement of dielectric interferometer filter.%研制介质膜干涉滤光片标准物质,包含3片不同标称值波长的滤光片,厚度为(2~3)mm,根据光谱中性金属膜的材质不同其峰值波长称值大约450 nm、550 nm、670 nm,用以检测光谱光度计波长示值误差和重复性.滤光片采用分光光度计方法进行定值,溯源至自然基准低压石英汞灯.根据(JJF 1343-2012)《标准物质定值的通用原则及统计学原理》和(JJG 812-93)《干涉滤光片检定规程》通过对滤光片进行均匀性检验、稳定性考核和介质膜干涉滤光片波长测量的不确定度评定,完成介质膜干涉滤光片标准物质的研究工作.
    • 尚震; 谢晨波; 王邦新; 谭敏; 钟志庆; 王珍珠; 刘东; 王英俭
    • 摘要: 对流层大气温度的垂直分布特征直接关联天气现象和大气污染物扩散,一直是气象和环境部门的重点观测对象.当前激光雷达技术已经成为探测对流层大气温度垂直分布和时间演变的有效手段.然而由于对流层中含有大量的气溶胶粒子,因此利用传统的振动拉曼和瑞利散射激光雷达技术测量大气温度具有一定的局限性,尤其是边界层内存在高浓度的气溶胶粒子会严重降低大气温度测量精度.采用纯转动拉曼激光雷达技术可有效降低气溶胶粒子对测量温度精度的影响.纯转动拉曼测温激光雷达的核心是分光单元设计,国内外研究普遍使用基于双光栅干涉仪的分光方法.文中将采用基于滤光片法的纯转动拉曼信号分光设计,相比而言该方法具有更高的分光效率,并且能够通过调节滤光片的角度改变激光雷达系统的灵敏度,操作更为简单.在中国科学院"大气灰霾追因与控制"先导专项支持下,该激光雷达与2014年11月安置在中国科学技术大学超级大气观测站.在亚太经济合作组织北京会议期间,展开大气环境测量试验.激光紫外波段能量约为200 mJ,频率为20 Hz,激光脉冲数为5000发,空间分辨率为7.5 m.实验结果表明,在晴朗无云气溶胶浓度较小的天气条件下温度测量统计误差小于1.5 K,测量高度可达10 km,在7.5 km以下统计误差小于1 K;在有薄云或者轻度雾霾天气条件下,温度测量统计误差在±3 K左右,测量有效高度通常在6~8 km,在4.8 km以下统计误差小于1 K.%The vertical distribution of the atmospheric temperature in the troposphere is directly related to the meteorological phenomena and the diffusion of atmospheric pollutants. It has been the major parameters observed by the meteorological department and the environment sector. The lidar technology has become an effective method to detect the vertical distribution and time variation of the atmospheric temperature in the troposphere. Lower tropospheric temperature profile measured by lidar using the Rayleigh and vibrational Raman scattering can' t be obtained accurately due to the abundant aerosols. Using N2 and O2 molecular pure rotational Raman scattering signal, the lower tropospheric temperature profile can be obtained without the influence of lower tropospheric aerosol theoretically. The main difficulty of the rotational Raman lidar is design and mechanics of the receiving spectroscopic system. In domestic research, most of the lidar systems use the spectroscopic technique based on double grating spectrometer. The technique based on the interference filters was introduced in this paper and used in our lidar system for observation of the tropospheric temperature. This technique had more efficiency and suppression in separation of the pure Raman signals from Mie signals. Furthermore, the system' s sensitivity can be optimized by selecting the tilting angle of the filters. The experiment was based on the project of "Formation Mechanism and Control Strategies of Haze in China" carried out by the research groups of the Chinese Academy of Sciences. Our lidar system was moved to the super atmospheric observatory in University of Chinese Academy of Sciences on November 2014 and the experiment were taken during the APEC conference. The energy of laser in ultraviolet was about 200 mJ, the frequency was 20 Hz, the laser pulse number was 5000, the spatial resolution was 7.5 m. The experimental result shows that the statistical error between lidar and radiosonde are less than 1 . 5 K with the range up to 10 km and the statistical error of less than 1 K is obtained up to 7.5 km height in the clean night. Larger differences of about 3 K at the region above the thin cloud may be caused by the strong elastic backscatter signal and the statistical error of less than 1 K is obtained up to 4.8 km height.
    • 王瑜琴; 黄渊; 刘春华; 冯震
    • 摘要: 设计并优化了一种新型多色仪。该方案中滤光片和探测器更加易于安装,缩短了光程长度,提高了对散射信号的探测本领,减少了透镜的使用数量,提高了多色光谱仪的传输率。通过数值计算,得到在200~20000eV温度范围内多色光谱仪的通道数为7是最优化结果。最后,对7通道多色仪的相关参数进行优化设计,使用模拟退火法计算优化各通道干涉滤光片的波长范围。%A new kind of polychromators is designed and optimized. It is easy to install the APD modules and interference filters, to reduce the optical path and improve the ability to detect scattering light, and to increase the transmittance of polychromator with decreased quantity of optical lens in this scheme. After a series of numerical simulation, the design of 7-optical channel detection is the best when the temperature ranges from 200eV to 20keV. At last, the related parameters of the 7 channel polychromator are designed and optimized, and the wavelength range of interference filters in each channel is optimized by simulating annealing method.
    • 王玉晶; 朱福宝
    • 摘要: 本文根据JJG178-2007《紫外、可见、近红外分光光度计》检定规程及JJF1059.1-2012《测量不确定度评定与表示》对干涉滤光片盲样测量结果的不确定度进行了分析和评定.
    • 潘星; 郑忠亮; 吴琼水
    • 摘要: 设计了免疫荧光定量分析仪,用以对人体血液和尿液中的各种分析物(CRP、PCT、NT-proBNP、cTnⅠ等)含量进行快速准确的定量分析.光源采用大功率LED灯珠,采用窄带干涉滤光片对激发光和荧光进行滤光,采用内置运放的光电转换芯片OPT101进行荧光强度的检测.采用步进电机驱动,皮带传动方式带动双排滚珠宽体滑块在单根精密直线导轨上滑动,实现对检测样品的扫描式检测.通过与标准仪器进行对比试验,结果表明样机在小型化、快速性以及低成本的基础上,测量结果准确,测量精度高,稳定性好,能满足临床应用要求.
    • 张艳莉; 卢小丰; 王景辉; 葛良全; 原遵东
    • 摘要: 干涉滤光片是高温计实现测量单色辐射亮度的重要光学元件,本文针对常用波长660nm滤光片,从截止特性角度分析对高温计校准有效波长和延伸温标的影响。通过三片波长带宽相同、截止特性互异的滤光片在同一光电高温计的光谱响应度实验,分析了截止特性对有效波长的影响,并利用工作基准钨带灯对高温计“单参考点-有效波长”的延伸温标进行验证,实验证明截止特性达OD4的滤光片可以满足标准级的高温计测量精度要求,基准级高温计则应选择截止特性更好的滤光片,以降低有效波长不确定度来减小延伸温标的不确定度。
    • 方靖岳
    • 摘要: 利用周期性多层介质膜的特征矩阵方法,采用MATLAB模拟计算了当入射光波并非垂直入射膜系时,高反膜反射率和法布里-珀罗干涉滤光片透过率的变化.结果表明,随着入射角度的增加,多层介质膜的工作波长向短波方向移动.并利用光程差的原理对这一现象进行了分析.
    • 贾岩; 付秀华; 胡洋
    • 摘要: 根据太阳光谱在波长750nm处的光能相对比较稳定,能避免杂光干扰这一特点,研制一种太阳跟踪器干涉滤光片.采用红外石英玻璃作为基底,选择Ti2O3和SiO2作为高低折射率材料,利用台伦对称膜系等效层的概念,设计三半波干涉滤光片.通过真空镀膜和离子辅助沉积系统,研制了在波段400nm-720nm、780nm- 1000nm平均透过率低于0.1%,750nm的透过率高于91%,带宽为40nm的太阳跟踪器干涉滤光片.在制备过程中,解决了Ti2O3吸收问题;通过实验,分析了波长漂移产生的原因并提出可行办法.
    • 邱圣虎
    • 摘要: 接触式干涉仪采用同一光源的两束光由于光程差而产生的另级次干涉带(即黑色干涉条纹)作为测量标线。另级次干涉带移动的距离代表了光程改变所移动的距离,该仪器的测量分度值是由干涉带的疏密程度决定的,在一固定的刻线范围内用单色光(可用滤光片产生)可见多条干涉条纹。因此。对干涉带疏密度的精确定量、干涉滤光片的波长准确与否直接影响仪器的示值准确性。
  • 查看更多

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号