首页>
外国专利>
PROC. TO SPIN AND WIND POLYESTER FILAMENTS USING THREAD ADDITIVES, FILAM. POLYESTER THAT CAN BE OBTAINED BY PROC. THREADING, STRETCH TEXTURATION OF POLYESTER FILAMENTS, AS WELL AS TEXTURED POLYESTER FILAMENTS THAT CAN BE OBTAINED BY STRETCH TEXTURATION.
PROC. TO SPIN AND WIND POLYESTER FILAMENTS USING THREAD ADDITIVES, FILAM. POLYESTER THAT CAN BE OBTAINED BY PROC. THREADING, STRETCH TEXTURATION OF POLYESTER FILAMENTS, AS WELL AS TEXTURED POLYESTER FILAMENTS THAT CAN BE OBTAINED BY STRETCH TEXTURATION.
Procedure for the production and winding of preoriented polyester filaments, which are composed of at least 90% by weight, based on the total weight of the polyester filament of poly (butylene terephthalate) (PBT) and / or poly (terephthalate of trimethylene) (PTMT), preferably PTMT, characterized in that a) the spinning of the yarn is adjusted in the range of 70 to 500, b) the filaments pass through a zone of delayed cooling action of a length from 30 mm to 200 mm directly after the exit of the spinning nozzle, c) the filaments are cooled below the solidification temperature, d) the filaments are packaged at a distance between 500 mm and 2500 mm with respect to the lower side of the nozzle, e) the thread tension is adjusted before and between the extraction rollers between 0.05 cN / dtex and 0.20 cN / dtex, f) the thread is wound with a thread tension between 0.025 cN / dtex and 0.15 cN / dtex, g) the winding speed is set between 2200 m / min and 6000 m / min, h) and a polyester is used which mixes from 0.05% by weight to 2.5% by weight, based on the total weight of the filament, of additive polymer as an elongation increasing agent.
展开▼
机译:基于聚(对苯二甲酸丁二醇酯)(PBT)和/或聚(对苯二甲酸丙二醇酯)的聚酯长丝的总重量,由至少90%重量组成的预取向聚酯长丝的生产和卷绕程序PTMT),最好是PTMT,其特征在于:a)在纺丝后直接将长丝的纺丝调节在70至500的范围内; b)长丝直接通过延迟冷却作用区域,其长度为30 mm至200 mm c)将长丝冷却至低于凝固温度,d)将长丝相对于喷嘴的下侧以500 mm至2500 mm的距离包装,e)调整线张力之前并且在抽拉辊之间的0.05 cN / dtex和0.20 cN / dtex之间,f)以0.025 cN / dtex和0.15 cN / dtex之间的线张力缠绕线,g)卷绕速度设置为2200 m / min和6000 m / min,h)和聚酯是我们以长丝的总重量为基准,混合0.05重量%至2.5重量%的添加剂聚合物作为伸长率增加剂。
展开▼