首页>
外国专利>
Symmetrical and asymmetrical light structures from particles of annual plants and method of producing light and asymmetrical structures from particles of annual plants
Symmetrical and asymmetrical light structures from particles of annual plants and method of producing light and asymmetrical structures from particles of annual plants
symmetrical and asymmetric light layers of single-year particles of cereal straw,in particular wheat, wheat, barley, oats or wheat, at least one layer with different large areas, the density of the apparatus below 300 kg/m3 per layer of the apparatus in which the nasal density is 20-60 kg/m3 in the case of 20-90 kg/m3 in two classes, and straw particles are bonded by pMDI or water-based glue in the amount of 2% -10% dry glue mass to the dry weight of straw particles. Mode of production of light and asymmetrical units of single-year plant particles calibrating the moisture content of straw, favourably pressed or baled,and then it is scraped together by cutting together at the same time fractionating the straw particles obtained so that the mesh is obtained with a sleeper density between 20 kg/m3 (most often the fractions remaining in the mesh with eyes 1 x 1 mm and 2,5 x 2,5 mm are around 70%,fractions less than 3%) and 60 kg/m3 (most often the fractions remaining in the mesh with eyes 1 x 1 mm and 2,5 x 2,5 mm are about 80-90%,fractions smaller than 5%),and then the mesh i s moistened from 1% to 25% by adding a glue-like adhesive in the amount of 2-10% dry straw, and then a carpet is formed and pressed at a temperature not less than 140-C, during 5-20 s/mm body thickness.
展开▼
机译:谷物秸秆(尤其是小麦,小麦,大麦,燕麦或小麦)的一年颗粒的对称和非对称轻层,至少一层面积不同的大面积,设备的密度低于每层设备300 kg / m3其中鼻密度为20-90 kg / m3时分为两类,鼻密度为20-60 kg / m3,并且秸秆颗粒通过pMDI或水基胶以2%-10%干胶质量的量粘合到秸秆颗粒的干重。一年生植物颗粒的轻型和不对称单元的生产方式,可对秸秆的水分进行校准,最好压榨或打包,然后通过同时切碎将所得到的秸秆颗粒分级切碎而将其刮在一起,从而获得网眼轨枕密度在20 kg / m3之间(最常见的是,在1 x 1 mm和2,5 x 2,5 mm的眼睛中残留在网眼中的分数约为70%,分数小于3%)和60 kg / m3(最常见的是,用1 x 1 mm和2,5 x 2,5 mm的眼睛保留在网格中的分数约为80-90%,分数小于5%),然后将网格从1%润湿到25%加入2-10%干稻草的胶状粘合剂,然后形成地毯,并在5-20 s / mm的车身厚度下,在不低于140-C的温度下压制。
展开▼