首页> 外文OA文献 >In-situ fabrication of gold nanoparticle functionalized probes for tip-enhanced Raman spectroscopy by dielectrophoresis
【2h】

In-situ fabrication of gold nanoparticle functionalized probes for tip-enhanced Raman spectroscopy by dielectrophoresis

机译:通过介电电泳原位制备用于尖端增强拉曼光谱的金纳米粒子功能化探针

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

We report the use of dielectrophoresis to fabricate in-situ probes for tip-enhanced Raman spectroscopy (TERS) based on Au nanoparticles. A typical conductive atomic force microscope (AFM) was used to functionalize iridium-coated conductive silicon probes with Au nanoparticles of 10-nm diameter. Suitable TERS probes can be rapidly produced (30 to 120 s) by applying a voltage of 10 Vpp at a frequency of 1 MHz. The technique has the advantage that the Au-based probes are ready for immediate use for TERS measurements, minimizing the risks of tip contamination and damage during handling. Scanning electron microscopy and energy dispersive x-ray spectroscopy were used to confirm the quality of the probes, and used samples of p-ATP monolayers on silver substrates were used to demonstrate experimentally TERS measurements.
机译:我们报告使用介电电泳制造基于Au纳米粒子的尖端增强拉曼光谱(TERS)的原位探针。典型的导电原子力显微镜(AFM)用于对直径为10 nm的金纳米粒子的铱涂层导电硅探针进行功能化。通过以1 MHz的频率施加10 Vpp的电压,可以快速生产出合适的TERS探针(30到120 s)。该技术的优势在于,基于金的探头可立即用于TERS测量,从而最大程度地减少了操作过程中尖端污染和损坏的风险。使用扫描电子显微镜和能量色散X射线光谱法确认探针的质量,并使用在银基材上使用的p-ATP单层样品来证明实验性TERS测量。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号