首页> 外文OA文献 >Temperature dependence of the elastic modulus of (Ni0.6Nb0.4)1-xZrx membranes: Effects of thermal treatments and hydrogenation
【2h】

Temperature dependence of the elastic modulus of (Ni0.6Nb0.4)1-xZrx membranes: Effects of thermal treatments and hydrogenation

机译:(Ni 0.6 Nb 0.4 1-x Zr x 膜的弹性模量的温度依赖性:热处理和加氢

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Amorphous (Ni0.6Nb0.4)1−xZrx membranes were investigated by means of X-ray diffraction, thermogravimetry, differential thermal analysis and tensile modulus measurements. Crystallization occurs only above 673 K, and even after hydrogenation the membranes retain their mainly amorphous nature. However, after exposure to gaseous hydrogen, the temperature dependence of the tensile modulus, M, displays large variations. The modulus of the hydrogen reacted membrane is higher with respect to the pristine samples in the temperature range between 298 K and 423 K. Moreover, a sharp drop in M is observed upon heating to approximately 473 K, well below the glass transition temperature of these glasses. We propose that the changes in the moduli as a function of temperature on the hydrogenated samples are due to the formation of nanocrystalline phases of Zr hydrides in (Ni0.6Nb0.4)1−xZrx-H membanes.
机译:通过X射线衍射,热重分析,差热分析和拉伸模量测量研究了非晶态(Ni0.6Nb0.4)1-xZrx膜。结晶仅在673 K以上发生,并且即使在氢化后,膜仍保持其主要的非晶态性质。然而,在暴露于气态氢之后,拉伸模量M的温度依赖性显示出较大的变化。相对于原始样品,在298 K至423 K的温度范围内,氢反应膜的模量更高。此外,加热至约473 K时,观察到M的急剧下降,远低于这些样品的玻璃化转变温度。眼镜。我们提出,氢化样品上模量随温度的变化是由于在(Ni0.6Nb0.4)1-xZrx-H膜中Zr氢化物的纳米晶相的形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号