Review of Single Transient Oscillographic Recorders with Gigahertz Bandwidth

摘要

In laser driven inertial confinement fusion research, at Livermore, we are diagnosing many phenomena that occur in a time frame that exceeds the capabilities of even the most advanced, present day oscillographic recording instruments. Many of the by-products of the interaction between the laser beam and fuel pellet are monitored to determine the specifics of the fusion process. By the use of appropriate detectors, we convert the information contained in the radiated by-products to electrical signals which are recorded on high bandwidth oscillographic recorders. Our present range of recording capabilities for one x-ray diagnostic measurement in use at Livermore is shown. A commonly used configuration consists of an XRD-31 x-ray detector connected to a direct access Tektronix R7912 transient digitizer using 1/2 in. diameter air dielectric coaxial cable. This configuration gives a system fwhm of approximately 335 ps. Our premier configuration, on the other hand, consists of an improved response detector and a French Thomson-CSF TSN-660 oscilloscope with a shorter length of coaxial cable (typically 20 feet). The system fwhm in this case is less than 120 ps which is our fastest oscillographic recording system at the present time. (ERA citation 09:015631)