Multisphere neutron spectroscopy measurements at the Los Alamos National Laboratory Plutonium Facility

摘要

Multisphere neutron spectroscopy methods are applied to measure representative working fields within the Los Alamos National Laboratory (LANL) Plutonium Facility. This facility hosts dynamic processes, which include the fabrication of (sup 238)Pu heat sources for radioisotope generators used to power space equipment and a variety of plutonium research programs that involve recovery, hydrofluorination, and metal production. Neutron fluence per unit lethargy, as a function of neutron energy measured for locations throughout this facility, are described. Dosimeter/remmeter response functions (e.g., determined for a 22.8-cm-diameter neutron rem detector (NRD), an Anderson/Braun-type neutron ''Snoopy'' monitor, track-etch CR-39, BDI-100 bubble detectors, and Kodak type A nuclear track emulsion film, (NTA)) are folded into these spectra to calculate absolute response values of counts, tracks, or bubbles per unit-dose equivalent. The relative response values per unit- dose equivalent for bare and albedo (sup 6)LiF-based thermoluminescent dosimeters (TLDs) are also calculated to estimate response scenarios encountered with use of the LANL-TLD. These results are further compared to more conventional methods of estimating neutron spectral energies such as the ''9-to-3 ratio'' method.