...
首页> 外文期刊>CERAMICS INTERNATIONAL >Novel synthesis of silicon carbide nanotubes by microwave heating of blended silicon dioxide and multi-walled carbon nanotubes: The effect of the heating temperature
【24h】

Novel synthesis of silicon carbide nanotubes by microwave heating of blended silicon dioxide and multi-walled carbon nanotubes: The effect of the heating temperature

机译:微波加热混合二氧化硅和多壁碳纳米管的新型合成碳化硅纳米管:加热温度的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Silicon carbide nanomaterials, especially silicon carbide nanotubes (SiCNTs), are known as excellent materials for high-power and high-temperature harsh environment electronics applications because of the unique properties of SiCNTs, such as a high thermal stability, good chemical inertness and excellent electronic properties. In this article, we presented a novel synthesis of SiCNTs by microwave heating a blend of silicon dioxide (SiO2) and multi-walled carbon nanotubes (MWCNTs) at a ratio of 1:3 at temperatures of 1350 degrees C, 1400 degrees C and 1450 degrees C. The effects of different heating temperatures on the synthesis of SiCNTs were studied. X-ray diffraction revealed the presence of single phase beta-SiC for syntheses conducted at 1400 degrees C and 1450 degrees C. Meanwhile, field-emission scanning electron microscopy images showed that no residual silicon dioxide or MWCNTs was observed with syntheses conducted at 1400 degrees C and 1450 degrees C. High-magnification transmission electron microscopy revealed that the tubular structure of the MWCNTs was preserved and that SiCNTs had a lattice fringe spacing of 0.261 nm corresponding to the (111) plane of beta-SiC. Photoluminescence spectroscopy showed the presence of a beta-SiC peak at a wavelength of 465 nm, and the band gap energy of SiCNTs was 2.67 eV. Fourier transform infrared spectroscopy analysis revealed that the absorption band of the Si-C bond was detected at 803 cm(-1). The purity of SiCNTs synthesized at 1400 degrees C and 1450 degrees C is high, as indicated by the low weight loss in thermo-gravimetric analysis. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
机译:碳化硅纳米材料,特别是碳化硅纳米管(SiCNT),由于具有高的热稳定性,良好的化学惰性和优异的电子学性能,被认为是用于高功率和高温恶劣环境电子应用的优秀材料。属性。在本文中,我们介绍了一种新型合成SiCNT的方法,该方法是在1350摄氏度,1400摄氏度和1450摄氏度的温度下,以1:3的比例微波加热二氧化硅(SiO2)和多壁碳纳米管(MWCNT)的混合物研究了不同加热温度对SiCNTs合成的影响。 X射线衍射揭示了在1400℃和1450℃下进行合成的单相β-SiC的存在。同时,场发射扫描电子显微镜图像显示在1400℃下进行合成没有观察到残留的二氧化硅或MWCNT。 C和1450℃。高倍率透射电子显微镜显示,MWCNT的管状结构得以保留,并且SiCNT具有对应于β-SiC的(111)面的0.261nm的晶格条纹间隔。光致发光光谱法显示在465nm的波长处存在β-SiC峰,并且SiCNT的带隙能为2.67eV。傅立叶变换红外光谱分析表明,在803 cm(-1)处检测到Si-C键的吸收带。如在热重分析中的低重量损失所示,在1400℃和1450℃下合成的SiCNT的纯度高。 (C)2016 Elsevier Ltd和Techna Group S.r.l.版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号