首页> 外文期刊>International Journal of Thermal Sciences >The DRESOR method for one-dimensional transient radiative transfer in graded index medium coupled with BRDF surface
【24h】

The DRESOR method for one-dimensional transient radiative transfer in graded index medium coupled with BRDF surface

机译:DRESOR方法结合BRDF表面在梯度折射率介质中进行一维瞬态辐射传递

获取原文
获取原文并翻译 | 示例
           

摘要

Most research on transient radiative transfer is coupled with blackbody, specular or diffuse surface, which may only provide limited or inefficient information to analyze transient radiation transfer problems under particular circumstances. This study aims to extend the DRESOR (Distribution of Ratios of Energy Scattered by the medium Or Reflected by the boundary surface) method to solve the transient radiative heat transfer in a one-dimensional, non-emitting, absorbing and isotropically scattering medium with a linear graded index coupled with the BRDF (Bidirectional Reflectance Distribution Function) surface, which is closer to a real surface and can offer more accurate information. Here, a Minnaert model for the BRDF surface is applied. Numerically computed results of the time-resolved reflectance and transmittance are compared with those obtained by DOM and DFEM with blackbody surfaces, which verifies the DRESOR method. Meanwhile, the comparison between BRDF surface and diffuse surface has also been carried out. With the increase of optical thickness, the time-resolved reflectance and transmittance profiles change from a single peak, to a double-peak, and finally to a single peak with a relatively large scattering albedo, especially under the graded index. The scattering albedo has a significant influence on the peak values of the reflectance and transmittance. With the increase of parameter k of Minnaert model, the difference between BRDF surface and diffuse surface enlarges significantly. Furthermore, compared with the corresponding diffuse surface, the relative time-resolved reflectance difference of the BRDF surface can reach 16.7% and the transmittance can reach 7.4% at some dimensionless time. The intensities with the change of time in some directions show an evident difference between BRDF and diffuse surface. These discrepancies imply that the BRDF surface has an important influence on the transient radiative transfer. (C) 2015 Elsevier Masson SAS. All rights reserved.
机译:大多数关于瞬态辐射传递的研究都与黑体,镜面或漫射表面相结合,这可能仅提供有限或效率低下的信息来分析特定情况下的瞬态辐射传递问题。这项研究旨在扩展DRESOR(介质散射或边界表面反射的能量之比的分布)方法,以解决一维,非发射,吸收和各向同性线性散射介质中的瞬态辐射热传递渐变折射率与BRDF(双向反射率分布函数)表面相结合,该表面更接近真实表面并可以提供更准确的信息。在此,应用了用于BRDF表面的Minnaert模型。将时间分辨的反射率和透射率的数值计算结果与通过DOM和带有黑体表面的DFEM获得的结果进行了比较,这验证了DRESOR方法。同时,BRDF表面和扩散表面之间也进行了比较。随着光学厚度的增加,时间分辨的反射率和透射率曲线从单个峰变为双峰,最后变为具有相对较大散射反照率的单个峰,尤其是在渐变折射率下。散射反照率对反射率和透射率的峰值有重大影响。随着Minnaert模型参数k的增加,BRDF表面和扩散表面之间的差异明显增大。此外,与相应的漫射表面相比,BRDF表面的相对时间分辨反射率差异可以达到16.7%,并且在某个无量纲的时间透射率可以达到7.4%。随时间变化的强度在BRDF和扩散表面之间显示出明显的差异。这些差异表明BRDF表面对瞬态辐射传递有重要影响。 (C)2015 Elsevier Masson SAS。版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号