Primary interactions of biomass components during fast pyrolysis

摘要

Fast pyrolysis is an industrially attractive method to produce fuels and chemicals from biomass; however, to gain better control over the process, the reactions and interactions between the components and decomposition products need elucidation. This study investigated primary reactions during fast pyrolysis of biomass. Pyrolysis of the three main biomass components (cellulose, hemicellulose and lignin) and their blends was carried out with a micro-pyrolyser connected to a Gas Chromatograph-Mass Spectrometer/Flame Ionisation Detector (GC-MS/ FID). The blends of the individual components were prepared in similar proportions to that of native biomass (birchwood) and were pyrolysed at 600 degrees C for 2 s. The results showed that the two-component blends decrease the production of saccharides to a large extent. This was especially noticeable for levoglucosan when cellulose was mixed with either hemicellulose or lignin. Similarly, in the presence of cellulose, the formation of phenolic compounds from lignin was inhibited by 62 . However, no differences were found in yields of the main products for the xylan-lignin blend compared to those from the individual components. The yields of volatile products from the cellulose-xylan blend were promoted for a majority of the product categories and were most pronounced for the aldehydes. Furthermore, while the formation of the phenols and saccharides was slightly inhibited for the three-component blend, the aldehydes, ketones and furans showed an increased production compared to the weighed sum of products expected, based on the pyrolysis of the individual components. The native biomass showed a similar trend as the three-component blend in all product categories except for the saccharides, which were inhibited to a large extent. This study provides a better understanding of the interactions occurring between different components during fast pyrolysis of biomass.