首页> 外文期刊>Applied optics >Design of a high-numerical-aperture miniature microscope objective for an endoscopic fiber confocal reflectance microscope
【24h】

Design of a high-numerical-aperture miniature microscope objective for an endoscopic fiber confocal reflectance microscope

机译:内窥镜纤维共焦反射镜用高数值孔径微型显微镜物镜的设计

获取原文
获取原文并翻译 | 示例
           

摘要

An endoscopic confocal microscope requires a high-performance, miniaturized microscope objective. We present the design of a miniature water-immersion microscope objective that is approximately 10 times smaller in length than a typical commercial objective. The miniature objective is 7 mm in outer diameter and 21 mm in length (from object to image). It is used in a fiber confocal reflectance microscope. The miniature microscope objective has a numerical aperture of 1.0, a field of view of 250 μm, and a working distance of 450 μm. It delivers diffraction-limited performance at λ=1064 nm. Micrometer-level resolution has been experimentally demonstrated.
机译:内窥镜共聚焦显微镜需要高性能的微型显微镜物镜。我们介绍了微型水浸显微镜物镜的设计,其长度比典型的商业物镜小约10倍。微型物镜的外径为7毫米,长度为21毫米(从物体到图像)。它用于光纤共聚焦反射显微镜。微型显微镜物镜的数值孔径为1.0,视野为250μm,工作距离为450μm。它在λ= 1064 nm处提供衍射极限性能。微米级分辨率已通过实验证明。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号