...
首页> 外文期刊>Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics >Fe3+ and PO43- co-doped Li-rich Li1.20Mn0.56Ni0.16Co0.08O2 as cathode with outstanding structural stability for Lithium-ion battery
【24h】

Fe3+ and PO43- co-doped Li-rich Li1.20Mn0.56Ni0.16Co0.08O2 as cathode with outstanding structural stability for Lithium-ion battery

机译:Fe3 +和PO43-共掺杂锂富含Li1.20mN0.56Ni0.16Co0.08O2作为锂离子电池的突出结构稳定性的阴极

获取原文
获取原文并翻译 | 示例
           

摘要

The Li-rich Mn-based cathode materials exhibit great potential due to their ultrahigh specific capacity, but still suffer from low initial coulombic efficiency, inferior cycling stability, voltage decay and poor rate performance. In this study, we propose to enhance the structural stability and the electrochemical performances of Li1.20Mn0.56Ni0.16Co0.08O2 through the co-doping of Fe3+ and PO43-. The Fe3+ and PO43- are simultaneously doped in the precursor via a novel wet chemical method. In comparison with the undoped or mono-doped samples, the co-doped sample exhibits the best electrochemical performances owing to the synergistic effect of Fe3+ and PO43-, such as a high initial coulombic efficiency (88%), great cyclic stability (remains a specific capacity of 214 mAh g(-1) after 130 cycles at 1 C) and mitigated voltage fade (2.12 mV per cycle). The synergistic mechanism of Fe3+ and PO43- is revealed based on X-ray diffraction, transmission electron microscope, scanning electron microscopy, X-ray photoelectron spectroscopy and electrochemical measurements. The co-doping of Fe3+ and PO43- constructs a stable oxygen-packed framework, which can alleviate lattice distortion, reduce the mixing of cations and increase the reversible reaction of 2 O-2(-)/(O-2)(n-), contributing to outstanding structural stability. The synergetic strategy of anion and cation and the codoping method in this work may provide some inspiration for designing the high-performance cathode materials of Lithium-ion battery. (C) 2021 Elsevier B.V. All rights reserved.
机译:富锂锰基阴极材料具有极高的比容量,但仍存在初始库仑效率低、循环稳定性差、电压衰减和速率性能差等问题。在本研究中,我们建议提高Li1的结构稳定性和电化学性能。20Mn0。56Ni0。16Co0。通过Fe3+和PO43-的共掺杂得到08O2。通过一种新的湿化学方法,在前驱体中同时掺杂Fe3+和PO43-。与未掺杂或单掺杂样品相比,由于Fe3+和PO43-的协同效应,共掺杂样品表现出最佳的电化学性能,例如高初始库仑效率(88%)、良好的循环稳定性(在1 C下130次循环后仍保持214 mAh g(-1)的比容量)和缓解的电压衰减(每循环2.12 mV)。通过X射线衍射、透射电子显微镜、扫描电子显微镜、X射线光电子能谱和电化学测试,揭示了Fe3+与PO43-的协同作用机理。Fe3+和PO43-的共掺杂构建了稳定的氧填充骨架,可以减轻晶格畸变,减少阳离子的混合,增加2O-2(-)/(O-2)(n-)的可逆反应,从而提高结构稳定性。本文提出的阴阳离子协同策略和共掺杂方法对设计高性能锂离子电池正极材料具有一定的启发作用。(c)2021爱思唯尔B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号