首页> 外文期刊>ACS applied materials & interfaces >Upshift of Phase Transition Temperature in Nanostructured PbTiO3 Thick Film for High Temperature Applications
【24h】

Upshift of Phase Transition Temperature in Nanostructured PbTiO3 Thick Film for High Temperature Applications

机译:高温应用纳米结构PbTiO3厚膜中相变温度的上移

获取原文
获取原文并翻译 | 示例
           

摘要

Thick polycrystalline pure PbTiO3 films with nano size grains were synthesized for the first time by aerosol deposition. Annealed 7 μm thick films exhibit well-saturated ferroelectric hysteresis loops with a remanent polarization and coercive field of 35 μC/cm~2 and 94 kV/cm, respectively. A large-signal effective d_(33,eff) value of >60 pm/V is achieved at room temperature. The measured ferroelectric transition temperature (T_c) of the films ~550 °C is >50 °C higher than the reported values (~490 °C) for PbTiO3 ceramics. First-principles calculations combined with electron energy loss spectroscopy (EELS) and structural analysis indicate that the film is composed of nano size grains with slightly decreased tetragonality. There is no severe off-stoichiometry, but a high compressive in-plane residual stress was observed in the film along with a high transition temperature and piezoelectric response. The ferroelectric characteristics were sustained until 200 °C, providing significant advancement toward realizing high temperature piezoelectric materials.
机译:通过气溶胶沉积法首次合成了具有纳米尺寸晶粒的厚多晶纯PbTiO3厚膜。退火后的7μm厚膜呈现出饱和的铁电磁滞回线,其剩余极化和矫顽场分别为35μC/ cm〜2和94 kV / cm。在室温下可实现> 60 pm / V的大信号有效d_(33,eff)值。薄膜的测得的铁电转变温度(T_c)〜550°C比PbTiO3陶瓷的报道值(〜490°C)高出50°C。第一性原理计算与电子能量损失谱(EELS)结合以及结构分析表明,该薄膜由纳米尺寸的晶粒组成,四方性略有降低。没有严重的化学计量失衡,但是在膜中观察到了高压缩面内残余应力以及高转变温度和压电响应。铁电特性一直保持到200°C,为实现高温压电材料提供了重大进展。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号