The Use of Acoustic Emission Intensity Analysis for the Assessment of Cover Crack Growth in Corroded Concrete Structures

摘要

In this paper, acoustic emission (AE) intensity analysis was utilized to assess the concrete cover cracking due to steel corrosion in reinforced concrete structures. A total of 30 reinforced concrete prism samples were tested under an accelerated corrosion test coupled with continuous AE monitoring using attached AE sensors. The samples were cast with three concrete cover thicknesses (20, 30 and 40 mm) around steel bars and were exposed to five percentages of steel mass loss: 1, 2, 3, 4, and 5%. The cover cracking was monitored daily by visual inspection to detect and measure crack widths. Different AE signal parameters were continuously recorded during the tests, including number of hits, signal strength, energy, and amplitude. The acquired AE events were subjected to an intensity analysis of signal strength to estimate historic index (H(t)) and severity (S_r). In addition, a b value analysis was conducted on all AE data and the results were compared to those obtained from the intensity analysis. The results showed that increasing the cover thickness had no significant impact on AE parameters (number of hits, cumulative signal strength, cumulative energy, amplitude, H(t), and S_r) at similar values of crack growth. Nonetheless, varying the cover thickness from 20 to 40 mm resulted in lower crack widths and slightly higher b values at the same levels of steel mass loss. It was also found that both H(t) and S_r showed a more evident correlation with the values of crack growth than did b values, regardless of cover thickness or percentage of steel mass loss. Finally, an intensity classification chart was developed to quantify