首页>外文期刊>Journal of Mechanics and MEMS

Journal of Mechanics and MEMS

中文名称：力学与微机械学报

ISSN：0974-8407
出版周期：Semiallual

发文量：52

期刊论文

热门论文

年度选择

2022
- 第1期
2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
2019
- 第1期
- 第2期
2018
- 第1期
- 第2期
2017
- 第1期
2016
- 第1期
- 第2期
2015
- 第1期
- 第2期
2014
- 第2期

更多>>

全选（0）

1.Performance Evaluation of Low Heat Rejection Diesel Engine with Waste Fried Vegetable Oil

机译：废炒菜油低排热柴油机的性能评估
- 作者：NAGA S. SARADA;KALYANI K. RADHA;REDDY T. K. K.;MURALI KRISHNA M. V. S.;PERIAH. R. CHOWDARY;SHANKER
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Low heat rejection engine;
- Superni insert;
- Injection pressure;
- Waste fried oil;
- Insulated piston;
2.Microstructure Characteristics and Solidification Behavior of Al-(4-5) Fe-1V-1Si Alloys

机译：Al-（4-5）Fe-1V-1Si合金的组织特性和凝固行为
- 作者：B. N. PATHAK;ASHWANI ARORA;K. L. SAHOO;M. N. MISHRA
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Alloy composition;
- Degassing;
- Microstructure;
- Cooling rate;
- Refinement;
- Interdendritic phase;
3.A Study on Slurry Erosive Wear Behavior of Thermally Sprayed Metallic, Ceramic Oxide and Carbide Coatings for Component used in Textile Processing Unit

机译：纺织加工部件用热喷涂金属，陶瓷氧化物和硬质合金涂层的浆液侵蚀磨损性能研究
- 作者：M. SENTHIL KUMAR;S. NATARAJAN
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Thermal spray coatings;
- HVOF;
- Plasma;
- Wire spray;
- Slurry erosion;
4.A Laser Assisted Approach for Zone Refining of Silver-Copper Alloys, Using CW CO_2 Laser as Heat Source

机译：以CW CO_2激光为热源的激光辅助银铜合金区域细化方法
- 作者：K. R. NAMBIAR;N. M. NAGARAJAN;M. A. JOSEPH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
5.Study of Cutting Forces and Temperature During Turning of Materials with Different Hardness Values

机译：不同硬度值材料车削过程中切削力和温度的研究
- 作者：P. B. NAGARAJ;SHRISHAIL KAKKERI;P. DINESH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
6.An Investigation into Qualitatively Behaviour on the Mixture Model for Multiphase Flow

机译：多相流混合模型的定性行为研究
- 作者：A. K. BORAH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Multiphase flow;
- Mixtures;
- Flow control;
- Simulation mathematical models;
- Dispersions;
7.Shift Work, Productivity, Occupational Health and Safety in Process Industries

机译：流程行业的轮班工作，生产率，职业健康和安全
- 作者：K. K. DHANDE;SUNIL SHARMA
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Shift work;
- Health and safety;
- Injury;
- Productivity;
8.Semi-empirical Modelling Considerations for Fibre Tow/Epoxy Matrix Composites in Interfacial Pullout Tests

机译：界面拉拔试验中纤维束/环氧树脂基复合材料的半经验建模考虑
- 作者：K. PADMANABHAN
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Carbon fibre;
- Epoxy matrix;
- IFSS;
- Mesomechanics;
9.Optimization of Process Parameters to Maximize Formability for Better productivity by Using Taguchi Method

机译：使用Taguchi方法优化工艺参数以最大程度地提高可成型性以提高生产率
- 作者：Anoopkumar;T. Raghu;S. Rajesham;I. Balasundar
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Formability;
- Taguchi;
- ANOVA;
- Anisotropy;
10.Preparation and Application of Karanja Bio-diesel and it's Blends in a Twin Cylinder Diesel Engine

机译：卡拉扬生物柴油及其混合物在双缸柴油机中的制备与应用
- 作者：Chandrakanta Nayak;Saroj Kumar Achrya;Ranjan Kumar Swain
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Biodiesel;
- Twin cylinder;
- Blend;
- Performance;
- Emission;
11.Taguchi based Approach for Parametric Optimization of Multi Response Factors in Micro Drilling Operation

机译：基于Taguchi的微钻作业多响应因素参数优化方法。
- 作者：Ashish Bharti;S. K. Moulick
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Design of Experiments (DOE);
- Analysis of Variance (ANOVA);
- Signal to Noise (SNR) ratio;
- Micro drilling;
12.Experimental Investigations, Regression and Computational, Modeling and Analysis of Efficient and Effective Techniques for Fuel/Energy Conservation in Iron Foundries

机译：铁铸造厂燃料/节能高效技术的实验研究，回归与计算，建模与分析
- 作者：R. K. Jain
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Rotary furnace;
- Excess air percentage;
- Preheated air temperature;
- Oxygen enrichment;
- Mat lab;
- Energy consumption;
13.3 Dimensional Manufacturing: A Harbinger of Revolution

机译：3维制造：革命的先驱
- 作者：Rohit Sunny Kannattukunnel
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
14.Analysis of Steam Turbine Casing for Static Loading Condition

机译：静负荷工况下汽轮机机壳分析
- 作者：Laxminarayan K.;M. Venkatarama Reddy;Kumar
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
15.Perspectives of District Heating Biomass Energy Technology Transfer and its Social Factors - A Strategies for Large-scale Diffusion in India

机译：区域供热生物质能源技术转移及其社会因素的观点-印度大规模扩散的策略
- 作者：Ashis Acharjee;Prasun Chakraborti
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
16.Optimization of Cutting Parameters by Turning Titanium Material Using CBN Tool

机译：使用CBN刀具车削钛材料优化切削参数
- 作者：P. Vijaya Kumar Raju;Sivakoteswararao Katta;T. S. Vamsi Krishna
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Surface roughness;
- Optimization;
- RSM method;
- Regret ion analysis;
17.Quality Improvement of Indoor Air by Using Heat Recovery Wheel

机译：利用热回收轮改善室内空气质量
- 作者：Manu Prakash;Shrikant Arora;S. N. Mishra
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Indoor Air Quality;
- Energy Recovery;
- Wheel Selection;
- Cost Analysis;
18.'Analysis of Market segment with Quality Function Deployment'

机译：“通过质量功能部署进行市场细分分析”
- 作者：Mohammad Israr;Anshul Gangele
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Quality Function Deployment;
- Market Segment;
19.Influence of Process Parameters on Residual Stresses Induced by Milling of Aluminum Alloy Using Taguchi's Techniques

机译：田口技术对铝合金铣削加工残余应力的影响
- 作者：S. Madhava Reddy;A. Chennakesava Reddy
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- End milling operations;
- Residual stresses;
- Taguchi design;
20.Technical Review on Study of Compressed Air Vehicle (CAV)

机译：压缩空气汽车研究技术综述
- 作者：Hemant Kumar Nayak;Devanshu Goswami;Vinay Hablani
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Compressed air vehicle. Fuel Engine;
- Compressed air technology;
21.GENERALIZED HAMILTON VARIATIONAL PRINCIPLES FOR NON-LINEAR ANALYSES OF BEAM-COLUMN STRUCTURES

机译：梁柱结构非线性分析的广义哈密顿变分原理
- 作者：Yuan-Yuan Zhu;Chang-Jun Cheng
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
22.THE SURFACE INSTABILITY OF A GRADED THIN FILM INDUCED BY INTERACTION WITH A RIGID CONTACTOR

机译：与刚性接触器相互作用引起的梯度薄膜的表面不稳定性
- 作者：Gan-Yun Huang;Shou-Wen Yu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Film;
- Stability;
- Van der Walls;
- Interaction;
23.MESO-FAILURE MECHANISM OF ROCK UNDER THERMAL-MECHANICAL COUPLING EFFECTS

机译：热力耦合作用下岩石的细观破坏机理
- 作者：Heping Xie;Jianping Zuo;Hongwei Zhou;Yang Ju;Xiaojun Wu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Temperature;
- Sandstone;
- Meso failure mechanism;
- Critical temperature;
- Fracture toughness;
- DSCM;
24.CHONG CYCLE, DURABILITY ISSUES AND ACCELERATED TESTS OF BRIDGE COATINGS

机译：桥面涂料的循环性，耐久性问题和加速测试
- 作者：Shuang-Ling Chong;Ken P. Chong
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Chong cycle;
- Surface engineering;
- Bridge coatings;
- Accelerated tests;
25.LARGE DEFLECTION OF ANNULAR SANDWICH PLATES

机译：环形夹心板的大挠度
- 作者：Ren-huai Liu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Large deflection;
- Annular sandwich plate;
- Modified iteration method;
- Analytical solution;
26.THE REFINED THEORY OF THERMOELASTIC BEAMS POSTING INSIDE WINKLER FOUNDATION

机译：温克勒基础内热弹性梁的精细化理论
- 作者：Min-zhong Wang;Yang Gao;Bao-Sheng Zhao
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- The refined theory;
- Thermoelastic beams;
- Winkler foundation;
27.Performance Evaluation of Low Heat Rejection Diesel Engine with Waste Fried Vegetable Oil

机译：废炒菜油低排热柴油机的性能评估
- 作者：NAGA S. SARADA;KALYANI K. RADHA;REDDY T. K. K.;MURALI KRISHNA M. V. S.;PERIAH. R. CHOWDARY;SHANKER
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Low heat rejection engine;
- Superni insert;
- Injection pressure;
- Waste fried oil;
- Insulated piston;
28.Microstructure Characteristics and Solidification Behavior of Al-(4-5) Fe-1V-1Si Alloys

机译：Al-（4-5）Fe-1V-1Si合金的组织特性和凝固行为
- 作者：B. N. PATHAK;ASHWANI ARORA;K. L. SAHOO;M. N. MISHRA
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Alloy composition;
- Degassing;
- Microstructure;
- Cooling rate;
- Refinement;
- Interdendritic phase;
29.A Study on Slurry Erosive Wear Behavior of Thermally Sprayed Metallic, Ceramic Oxide and Carbide Coatings for Component used in Textile Processing Unit

机译：纺织加工部件用热喷涂金属，陶瓷氧化物和硬质合金涂层的浆液侵蚀磨损性能研究
- 作者：M. SENTHIL KUMAR;S. NATARAJAN
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Thermal spray coatings;
- HVOF;
- Plasma;
- Wire spray;
- Slurry erosion;
30.A Laser Assisted Approach for Zone Refining of Silver-Copper Alloys, Using CW CO_2 Laser as Heat Source

机译：以CW CO_2激光为热源的激光辅助银铜合金区域细化方法
- 作者：K. R. NAMBIAR;N. M. NAGARAJAN;M. A. JOSEPH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
31.Study of Cutting Forces and Temperature During Turning of Materials with Different Hardness Values

机译：不同硬度值材料车削过程中切削力和温度的研究
- 作者：P. B. NAGARAJ;SHRISHAIL KAKKERI;P. DINESH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
32.An Investigation into Qualitatively Behaviour on the Mixture Model for Multiphase Flow

机译：多相流混合模型的定性行为研究
- 作者：A. K. BORAH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Multiphase flow;
- Mixtures;
- Flow control;
- Simulation mathematical models;
- Dispersions;
33.Shift Work, Productivity, Occupational Health and Safety in Process Industries

机译：流程行业的轮班工作，生产率，职业健康和安全
- 作者：K. K. DHANDE;SUNIL SHARMA
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Shift work;
- Health and safety;
- Injury;
- Productivity;
34.Semi-empirical Modelling Considerations for Fibre Tow/Epoxy Matrix Composites in Interfacial Pullout Tests

机译：界面拉拔试验中纤维束/环氧树脂基复合材料的半经验建模考虑
- 作者：K. PADMANABHAN
- 期刊名称：《Journal of Mechanics and MEMS》 | 2014年第2期
- Carbon fibre;
- Epoxy matrix;
- IFSS;
- Mesomechanics;
35.Optimization of Process Parameters to Maximize Formability for Better productivity by Using Taguchi Method

机译：使用Taguchi方法优化工艺参数以最大程度地提高可成型性以提高生产率
- 作者：Anoopkumar;T. Raghu;S. Rajesham;I. Balasundar
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Formability;
- Taguchi;
- ANOVA;
- Anisotropy;
36.Preparation and Application of Karanja Bio-diesel and it's Blends in a Twin Cylinder Diesel Engine

机译：卡拉扬生物柴油及其混合物在双缸柴油机中的制备与应用
- 作者：Chandrakanta Nayak;Saroj Kumar Achrya;Ranjan Kumar Swain
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Biodiesel;
- Twin cylinder;
- Blend;
- Performance;
- Emission;
37.Taguchi based Approach for Parametric Optimization of Multi Response Factors in Micro Drilling Operation

机译：基于Taguchi的微钻作业多响应因素参数优化方法。
- 作者：Ashish Bharti;S. K. Moulick
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Design of Experiments (DOE);
- Analysis of Variance (ANOVA);
- Signal to Noise (SNR) ratio;
- Micro drilling;
38.Experimental Investigations, Regression and Computational, Modeling and Analysis of Efficient and Effective Techniques for Fuel/Energy Conservation in Iron Foundries

机译：铁铸造厂燃料/节能高效技术的实验研究，回归与计算，建模与分析
- 作者：R. K. Jain
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Rotary furnace;
- Excess air percentage;
- Preheated air temperature;
- Oxygen enrichment;
- Mat lab;
- Energy consumption;
39.3 Dimensional Manufacturing: A Harbinger of Revolution

机译：3维制造：革命的先驱
- 作者：Rohit Sunny Kannattukunnel
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
40.Analysis of Steam Turbine Casing for Static Loading Condition

机译：静负荷工况下汽轮机机壳分析
- 作者：Laxminarayan K.;M. Venkatarama Reddy;Kumar
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
41.Optimization of Cutting Parameters by Turning Titanium Material Using CBN Tool

机译：使用CBN刀具车削钛材料优化切削参数
- 作者：P. Vijaya Kumar Raju;Sivakoteswararao Katta;T. S. Vamsi Krishna
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Surface roughness;
- Optimization;
- RSM method;
- Regret ion analysis;
42.Perspectives of District Heating Biomass Energy Technology Transfer and its Social Factors - A Strategies for Large-scale Diffusion in India

机译：区域供热生物质能源技术转移及其社会因素的观点-印度大规模扩散的策略
- 作者：Ashis Acharjee;Prasun Chakraborti
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
43.Quality Improvement of Indoor Air by Using Heat Recovery Wheel

机译：利用热回收轮改善室内空气质量
- 作者：Manu Prakash;Shrikant Arora;S. N. Mishra
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Indoor Air Quality;
- Energy Recovery;
- Wheel Selection;
- Cost Analysis;
44.'Analysis of Market segment with Quality Function Deployment'

机译：“通过质量功能部署进行市场细分分析”
- 作者：Mohammad Israr;Anshul Gangele
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Quality Function Deployment;
- Market Segment;
45.Technical Review on Study of Compressed Air Vehicle (CAV)

机译：压缩空气汽车研究技术综述
- 作者：Hemant Kumar Nayak;Devanshu Goswami;Vinay Hablani
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- Compressed air vehicle. Fuel Engine;
- Compressed air technology;
46.Influence of Process Parameters on Residual Stresses Induced by Milling of Aluminum Alloy Using Taguchi's Techniques

机译：田口技术对铝合金铣削加工残余应力的影响
- 作者：S. Madhava Reddy;A. Chennakesava Reddy
- 期刊名称：《Journal of Mechanics and MEMS》 | 2015年第1期
- End milling operations;
- Residual stresses;
- Taguchi design;
47.GENERALIZED HAMILTON VARIATIONAL PRINCIPLES FOR NON-LINEAR ANALYSES OF BEAM-COLUMN STRUCTURES

机译：梁柱结构非线性分析的广义哈密顿变分原理
- 作者：Yuan-Yuan Zhu;Chang-Jun Cheng
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
48.THE SURFACE INSTABILITY OF A GRADED THIN FILM INDUCED BY INTERACTION WITH A RIGID CONTACTOR

机译：与刚性接触器相互作用引起的梯度薄膜的表面不稳定性
- 作者：Gan-Yun Huang;Shou-Wen Yu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Film;
- Stability;
- Van der Walls;
- Interaction;
49.MESO-FAILURE MECHANISM OF ROCK UNDER THERMAL-MECHANICAL COUPLING EFFECTS

机译：热力耦合作用下岩石的细观破坏机理
- 作者：Heping Xie;Jianping Zuo;Hongwei Zhou;Yang Ju;Xiaojun Wu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Temperature;
- Sandstone;
- Meso failure mechanism;
- Critical temperature;
- Fracture toughness;
- DSCM;
50.CHONG CYCLE, DURABILITY ISSUES AND ACCELERATED TESTS OF BRIDGE COATINGS

机译：桥面涂料的循环性，耐久性问题和加速测试
- 作者：Shuang-Ling Chong;Ken P. Chong
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Chong cycle;
- Surface engineering;
- Bridge coatings;
- Accelerated tests;
51.LARGE DEFLECTION OF ANNULAR SANDWICH PLATES

机译：环形夹心板的大挠度
- 作者：Ren-huai Liu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- Large deflection;
- Annular sandwich plate;
- Modified iteration method;
- Analytical solution;
52.THE REFINED THEORY OF THERMOELASTIC BEAMS POSTING INSIDE WINKLER FOUNDATION

机译：温克勒基础内热弹性梁的精细化理论
- 作者：Min-zhong Wang;Yang Gao;Bao-Sheng Zhao
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第1期
- The refined theory;
- Thermoelastic beams;
- Winkler foundation;
53.SECURITY BASED MOBILE BANK TRANSACTIONS IN CLOUD COMPUTING USING KERBEROS KEY EXCHANGE METHOD

机译：云计算中基于安全的移动银行事务使用Kerberos密钥交换方法
- 作者：P. SENTHILKUMAR;S. ARUMUGAM;P. RAMASUBRAMANIAN
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
- Mobile transaction;
- Cloud computing;
- Interoperable;
- Universality;
- Security;
- Kerberos v5;
54.Security and Privacy Challenges in Big Data Era

机译：大数据时代的安全和隐私挑战
- 作者：Babak Bashari Rad;Nafisseh Akbarzadeh;Pouya Ataei;Yasaman Khakbiz
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第1期
- Big data;
- Security;
- Privacy;
- Data security;
- Data privacy;
55.LARGE DEFLECTION OF ANNULAR SANDWICH PLATES

机译：环形三明治板的大偏转
- 作者：Ren-huai Liu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第2期
- Large deflection;
- Annular sandwich plate;
- Modified iteration method;
- Analytical solution;
56.Optimization of Cutting Parameters by Turning Titanium Material Using CBN Tool

机译：用CBN工具转动钛材料的切割参数优化
- 作者：P. Vijaya Kumar Raju;Sivakoteswararao Katta;T. S. Vamsi Krishna
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第1期
- Surface roughness;
- Optimization;
- RSM method;
- Regret ion analysis;
57.Application of Ant Colony Optimization in Identifying the Key Gene Interactions

机译：蚁群优化在识别关键基因交互中的应用
- 作者：Leena Aswathy Menon R;SuryaPrabha B;Sreeja Ashok;M. V. Judy
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第2期
- Ant colony optimization;
- Clustering;
- Gene ontology;
- Semantic similarity;
- Optimum path;
58.METHOD FOR REDUCING OF NOISE BY IMPROVING SIGNAL-TO-NOISE-RATIO IN WIRELESS LAN

机译：通过提高无线LAN中的信噪比来降低噪声的方法
- 作者：R. SESHADRI;N. PENCHALAIAH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
59.Learning while Exploring with Virtual Reality

机译：在探索虚拟现实时学习
- 作者：Muhammad Zikri B. Mohamad;Suzana Ahmad;Marina Ismail;Norizan Mat Diah
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第1期
- Courseware;
- Virtual reality;
- Learning style;
60.NOISE ANALYSIS AND DETECTION BASED ON RF ENERGY DURATION IN WIRELESS LAN

机译：基于无线LAN中RF能量持续时间的噪声分析与检测
- 作者：R. SESHADRI;N. PENCHALAIAH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
61.Lightweight Concrete Blocks by Using Waste Plastic

机译：用废塑料轻量级混凝土块
- 作者：Werasak Raongjant;Meng Jing;Prachoom Khamput
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第1期
- Concrete blocks;
- Waste plastic;
- Compressive strength;
- Lateral cyclic loading;
- Shear strength;
- Block walls;
62.USE OF WEB-BASED INFORMATION RESOURCES BY SOCIAL SCIENTISTS AT MOHANLAL SUKHADIA UNIVERSITY, UDAIPUR

机译：Udaipur的Mohanlal Sukadia大学社会科学家对基于网络的信息资源使用
- 作者：SATISH KUMAR
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
63.MESO-FAILURE MECHANISM OF ROCK UNDER THERMAL-MECHANICAL COUPLING EFFECTS

机译：热机械耦合效应下岩石的中学失效机制
- 作者：Heping Xie;Jianping Zuo;Hongwei Zhou;Yang Ju;Xiaojun Wu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第2期
- Temperature;
- Sandstone;
- Meso failure mechanism;
- Critical temperature;
- Fracture toughness;
- DSCM;
64.Computer Simulation Modeling of Air Pollution Dispersion in and around Coal Mining Complexes of Multi-Sources

机译：多源煤矿复合物及其周围地区空气污染分散的计算机仿真建模
- 作者：R. Judith Kiruba;M. Sundararajan
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第2期
- Pollution dispersion modeling;
- Dispersion coefficients;
- Point source;
- Area source;
- And line source;
65.Measuring Affective in Learning

机译：在学习中测量情感
- 作者：Lusiana Syaiful;Marina Ismail
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第1期
- Affective assessment;
- Emotions;
- Fuzzy logic;
66.CLOUD COMPUTING - OVERVIEW, APPLICATIONS, ISSUES AND CHALLENGES

机译：云计算 - 概述，应用程序，问题和挑战
- 作者：BIRENDRA GOSWAMI;S. N. SINGH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
- Virtualization;
- Private;
- Public;
- Hybrid;
- Security;
67.THE SURFACE INSTABILITY OF A GRADED THIN FILM INDUCED BY INTERACTION WITH A RIGID CONTACTOR

机译：通过与刚性接触器相互作用引起的分级薄膜的表面不稳定性
- 作者：Gan-Yun Huang;Shou-Wen Yu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第2期
- Film;
- Stability;
- Van der walls;
- Interaction;
68.GENERALIZED HAMILTON VARIATIONAL PRINCIPLES FOR NON-LINEAR ANALYSES OF BEAM-COLUMN STRUCTURES*

机译：广义汉密尔顿梁柱结构非线性分析的变分原理*
- 作者：Yuan-Yuan Zhu;Chang-Jun Cheng
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第2期
69.Significance and Challenges in Big Data: A Survey

机译：大数据中的意义和挑战：调查
- 作者：B. Jothi;M. Pushpalatha;S. Krishnaveni
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第2期
- Big data;
- 3 v's;
- Hadoop;
- Pig;
- Hive;
- Hbase;
- DryadLINQ;
- SCOPE;
- Jaql;
70.THE REFINED THEORY OF THERMOELASTIC BEAMS POSTING INSIDE WINKLER FOUNDATION

机译：内部温泉横梁的精致理论
- 作者：Min-zhong Wang;Yang Gao;Bao-Sheng Zhao
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第2期
- The refined theory;
- Thermoelastic beams;
- Winkler foundation;
71.Perspectives of District Heating Biomass Energy Technology Transfer and its Social Factors - A Strategies for Large-scale Diffusion in India

机译：地区供暖生物质能能源技术转移的透视及其社会因素 - 印度大规模扩散的战略
- 作者：Ashis Acharjee;Prasun Chakraborti
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第1期
72.Cold Rolling Mill Optimization Using Fuzzy Logic

机译：使用模糊逻辑的冷轧机优化
- 作者：Nitesh Vaishnav;Gaurav Acharaya
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第1期
- Cold rolling mill;
- DOE;
- ANOVA;
- Orthogonal array;
- FUZZY logic;
73.Mechanical Behaviour of Rotary Friction Surfaced Aluminum Deposit on Low Carbon Steel

机译：低碳钢旋转摩擦表面铝矿床的力学行为
- 作者：V. Pitchi Raju;D. Govardhan;M. Manzoor Hussain
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第1期
74.Experimental Studies on the Erosion Rate of Annealed and Normalised Low Carbon Steel-bank Tubes of Process Boilers

机译：工艺锅炉退火和归一化低碳钢 - 钢管管腐蚀速率的实验研究
- 作者：T. S. G. Narayannen;Ashish Agarwal;D. A. Melwin Thomas
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第1期
- Erosion rate;
- Bank tubes;
- Annealing;
- Normalizing;
75.Influence of Process Parameters on Residual Stresses Induced by Milling of Aluminum Alloy Using Taguchi's Techniques

机译：工艺参数对铝合金轧制铝合金诱导的残余应力的影响
- 作者：S. Madhava Reddy;A. Chennakesava Reddy
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第1期
- End milling operations;
- Residual stresses;
- Taguchi design;
76.Light Weight Random Bit Hashing Technique Based Addressing Scheme Based Sybil Attack Detection for Menet

机译：基于Sybil Attack检测的基于Sybil攻击检测的基于Sybil Astack检测的轻量级随机比特散列技术
- 作者：T. Sheela;P. Muthusamy
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第2期
- Manet;
- Addressing scheme;
- Random bit hashing;
- Sybil attack;
77.K- MEANS CLUSTERING ALGORITHM

机译：K-表示聚类算法
- 作者：PRASAD B;P. V. RAMANA MURTHY;APPALA NAIDU
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
- Data mining;
- Clustering;
- K-means;
78.Experimental Investigations, Regression and Computational, Modeling and Analysis of Efficient and Effective Techniques for Fuel/Energy Conservation in Iron Foundries

机译：铁铸造厂燃料/节能技术有效有效技术的实验研究，回归和计算，建模和分析
- 作者：R. K. Jain
- 期刊名称：《Journal of Mechanics and MEMS》 | 2018年第1期
- Rotary furnace;
- Excess air percentage;
- Preheated air temperature;
- Oxygen enrichment;
- Mat lab;
- Energy consumption;
79.Review of Current Controllers for Shunt Active Power Filters in Adjustable Speed Drives

机译：可调速度驱动器中分流有源电源过滤器的电流控制器综述
- 作者：P. Balamurugan;N. Senthil Kumar
- 期刊名称：《Journal of Mechanics and MEMS》 | 2019年第1期
- Hysteresis controller;
- PWM generation;
- Reference currents;
- THD;
- Harmonics;
- Shunt active power filter;
80.IDENTIFY DESIGN PATTERNS AND ANTIPATTERNS TO IMPROVE SOFTWARE QUALITY

机译：识别设计模式和反派，以提高软件质量
- 作者：M. SATYA SUKUMAR;KARIMULLAH
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
- Patterns;
- Object-oriented design methods;
- Measurement techniques;
- Evaluation;
- Reverse engineering;
- Reengineering;
- Restructuring;
81.SURVEY PAPER ON CYBER FORENSICS

机译：关于Cyber Resensics的调查纸
- 作者：N. SRIDHAR;D. LALITHA BHASKARI;P. S. AVADHANI
- 期刊名称：《Journal of Mechanics and MEMS》 | 2020年第1期
- Cyber forensics;
- Digital evidence;
- Forensics tools;
- Cyber crimes;
82.EXTENDED KRAUSS DEFORMATION GRADIENT DECOMPOSITION OF SINGLE DIRECTOR SHELLS MADE OF ELASO-PLASTIC MATERIALS

机译：扩展了驻胶水材料单导向壳的克劳斯变形梯度分解
- 作者：Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Krauss decomposition;
- Deformation gradient;
- Elasto-plasticity;
83.BEHAVIOURAL ANALYSIS OF FIBER OPTICAL SENSOR BEAM TARGETED TO A FLAT SURFACE WITH VARIOUS TEXTURE

机译：纤维光学传感器梁的行为分析，具有各种纹理的平坦表面
- 作者：Frumence E. Utou;Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Fiber Optic Sensor;
- Reflectivity;
- Surface quality/texture;
- Laser beam;
- Incidence angle;
84.SMART ENHANCED ASSUMED STRAIN ELEMENT OF SMART LAMINATED PLATES

机译：智能层压板的智能增强假设应变元件
- 作者：Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Smart materials;
- Plates;
- Finite element;
85.UNCOOLED INFRARED IMAGING MICRO-CANTILEVER PIXEL BI-MATERIAL STRUCTURE WITH OPTICAL READOUT

机译：具有光学读出的未冷却红外成像微悬臂像素双层材料结构
- 作者：Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Uncooled IR Imaging;
- Micro-Cantilever Pixel;
- Bimaterial Structure;
- Optical Interferometric Readout;
86.MOLECULAR DYNAMICS SIMULATION FOR CLUSTERS OF COPPER ATOMS IN FE-CU ALLOY UNDER RADIATION

机译：辐射下Fe-Cu合金中铜原子簇的分子动力学模拟
- 作者：Jianwei Wang;Xinchun Shang;Guocai Lv
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Fe-Cu alloy;
- Neutron radiation;
- Molecular dynamics;
- Cascade simulations;
87.THE CALCULATION ANALYSIS OF DIFFERENT MORTAR MATERIALS ON THE MECHANICAL PROPERTIES OF THE GROUTING STRENGTHENING MASONRY STRUCTUREG

机译：不同砂浆材料对灌浆强化砌体结构力学性能的计算分析
- 作者：Shi Jianguang;Deng Hua;Ye Zhiming
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Masonry structure;
- Grouting strengthening method;
- Finite element analysis;
- Compressive strength;
- Shear strength;
88.WAVEGUIDE GYRO

机译：波导陀螺仪
- 作者：Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Waveguide;
- Gyro;
- Sagnac;
89.BUCKLING THEORY OF ELASTIC CONTINUA WITH ISOTROPIC DAMAGE

机译：具有各向同性损伤的弹性连续型屈曲理论
- 作者：Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Buckling;
- Elastic;
- Isotropic;
- Damage;
- Imperfection;
- Post-buckling;
90.THE EFFECT OF DAMAGE LOCATION ON THE PERFORMANCE OF COMPOSITE CANTILEVER BEAMS

机译：损坏位置对复合悬臂梁性能的影响
- 作者：J. E. N. Oliveira;Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Composite;
- Beam;
- Damage;
- Piezoelectric;
- Pvdf;
91.NUMERICAL SIMULATION OF VISCOELASTIC FLOWS IN A FLAT SLIT CHANNEL

机译：扁平狭缝通道中粘弹性流量的数值模拟
- 作者：Yong Li;Jianrong Zheng;Xinling Ma
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Viscoelastic fluid;
- Slit channel;
- The finite piece method;
- Numerical simulation;
92.MODELING A PIEZOELECTRICALLY ACTUATED PLANAR CAPACITOR ACTUATOR MEMBRANE

机译：建模压电驱动平面电容器致动器膜
- 作者：Oliver J. Myers;M. Anjanappa;Carl B. Freidhoff
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- MEMS;
- Piezoelectric;
- Actuator;
93.REAL-TIME ULTRASONIC RAIL HEALTH MONITORING SYSTEM FOR BOTH HEAVY HAUL LOADS AND HIGH SPEED TRAIN - SOUTH AFRICA OVERVIEW

机译：重载载荷和高速列车的实时超声波轨健康监测系统 - 南非概述
- 作者：Bohua Sun;Nawaz Mahomed
- 期刊名称：《Journal of Mechanics and MEMS》 | 2017年第1期
- Ultrasonic;
- Rail detector;
- Guided wave;
- Real-time;
- Crack;
94.HAMILTONIAN SYSTEM FOR ANALYZING SAINT-VENANT END EFFECTS OF PIEZOELECTRIC STRIPS

机译：汉密尔顿系统分析压电条的圣门末端效应
- 作者：Qing-Hua Qin;Jian-Shan Wang
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第2期
- Symplectic method;
- Piezoelectric;
- Hamiltonian system;
95.COMPATIBILITY OF NONLINEAR CONTINUA VIA CARTAN'S METHOD

机译：通过CASTAN方法的非线性COLLUA的兼容性
- 作者：Janusz Badur;Bohua Sun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第2期
96.ON SOME ASPECTS OF INTERFACES AT THE NANOSCALE

机译：关于纳米级接口的一些方面
- 作者：K. E. Aifantis;A. A. Konstantinidis;S. A. Hackney
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第2期
97.A NEW ANALYTICAL APPROACH TO PLANE BENDING BEAMS

机译：平面弯曲梁的新分析方法
- 作者：Yi Yang;Jike Liu
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第2期
- U-transformation;
- Simply supported beam;
- Plane bending;
- Precision;
- Analytical solution;
98.FINITE ANALYTIC SOLUTION WATER EQUATION AND ITS APPLICATION IN YANGTZE RIVER ESTUARY

机译：有限分析溶液水方程及其在长江河口的应用
- 作者：WANG Qingchun
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第2期
- The Finite Analytic Method ￡"FAM￡￡-shallow water equation;
99.THE EFFECT OF THE POISSON RATION ON THE VIBRATION OF THICK HOLLOW CIRCULAR CYLINDERS WITH DIFFERENT BOUNDARY CONDITIONS

机译：泊松比对不同边界条件的厚空心圆柱振动的影响
- 作者：Zhang Dazhi;Li Yongqiang
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第2期
- Poisson ration;
- Natural frequencies;
- Finite prism method;
- Thick hollow circular cylinders;
100.THEORETICAL MODELING OF PIEZOELECTRIC DEVICES IN IEEE UFFC-S

机译：IEEE UFFC-S中压电器件的理论建模
- 作者：Jiashi Yang
- 期刊名称：《Journal of Mechanics and MEMS》 | 2016年第2期
- Piezoelectricity;
- Plate;
- Vibration;
- Wave;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号