首页>外文期刊>International Journal of Theoretical and Applied Mechanics

International Journal of Theoretical and Applied Mechanics

中文名称：国际理论与应用》杂志上力学

ISSN：0973-6085
出版周期：3 times a year

发文量：150

期刊论文

热门论文

年度选择

2022
- 第1期
- 第2期
2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
2019
- 第1期
- 第2期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2017
- 第1期
- 第2期
- 第4期
- 第5期
- 第6期
2016
- 第1期
- 第2期
2015
- 第1期
- 第2期
2014
- 第1期
- 第2期
2013
- 第1期
- 第2期
2012
- 第1期
- 第2期
2011
- 第1期
- 第3期
2010
- 第1期
- 第3期
2009
- 第1期
- 第2期
- 第3期

更多>>

全选（0）

1.Implementation of Quality Circle - A Case Study

机译：实施质量圈-案例研究
- 作者：Munish Mehta;Janender Kumar;Satish Kumar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- TQM;
- Quality Circle;
- Quality Control;
2.The Effect of Chemical Reaction and Heat Transfer on MHD Flow of Viscous Fluid past a Moving Isothermal Vertical Porous Plate with Time Dependent Suction

机译：化学反应和热传递对粘滞流体通过时移吸力等温垂直多孔板流动的MHD流动的影响
- 作者：Paras Ram;Ashok Kumar;Hawa Singh
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Isothermal surfaces;
- Chemical reaction;
- Porous medium;
- MHD flow;
- Suction;
- Viscous fluid;
3.Nonlinear Dynamics of Plants Vibrating Under Wind Effects

机译：风力作用下植物振动的非线性动力学
- 作者：P. K. Talla;J. S. Mabekou;A. Fomethe;G. L. Gbaguidi Aisse;E. Foadieng;G. N. Bawe;A. Foudjet
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Nonlinear dynamics;
- Chaos;
- Resonance;
- Stability;
4.Effect of Sliding Speed on Dry Sliding Wear Behavior of Al-15Si Cast Alloy with Modification and/or Refinement

机译：滑动速度对改性和/或精炼Al-15Si铸造合金干滑动磨损行为的影响
- 作者：P. V. Chandra Sekhar Rao;A. Satya Devi
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Modification;
- Refinement;
- Tribometer;
- Wear rate;
- Temperature;
- Hardness;
5.Fracture Analysis of Adhesively Bonded Single Lap Joint with Four Layered Angle-Ply Antisymmetric Adherents

机译：具有四层角层反对称粘合剂的单圈搭接接头的断裂分析
- 作者：R. Venkata Kiran Kumar;V. Bala Krishna Murthy;J. Suresh Kumar;K. Vijaykumar Reddy
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Delamination Length;
- SERR;
- VCCT;
- Fiber angle;
- Suffix 'as'-anti-symmetry;
6.Two-Dimensional Theoretical Modeling of Anisotropic Wear in Carbon/Epoxy FRP Composites: Comparison with Experimental Data

机译：碳/环氧FRP复合材料各向异性磨损的二维理论建模：与实验数据的比较
- 作者：A. Chennakesava Reddy;M. Vidya Sagar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Two-dimensional modeling;
- Anisotropic wear;
- Carbon/epoxy;
7.Vehicular Pollution Dispersion for Urban Intersection and its Modeling

机译：城市交叉口的车辆污染扩散及其建模
- 作者：Suparna M.;K. K. Chaudhry
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Vehicular Emissions;
- Environmental Wind Tunnel;
- Urban Intersection;
- Artificial Neural Network;
8.Mathematical Model for Crack Arrest of a Piezoelectric Strip under Electrical and Mechanical Yielding

机译：机电屈服下压电带裂纹止裂的数学模型
- 作者：R. R. Bhargava;S. K. Srivastava
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Crack arrest;
- Energy release rate;
- Piezoceramics;
- Saturation zone;
- Slide-yield zone;
9.Non Conventional - Energy Cooling for Rural Development

机译：非常规-农村发展的能源冷却
- 作者：Radhey Sham;L. C. Singal;T. K. Jindal
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Renewable energy;
- Solar absorption systems;
- Eco-friendly;
- Preservation amp;
- human comfort;
10.Finite Element Analysis of Flush Endplate Beam to Column Bolted Steel Connection

机译：平端板梁与柱螺栓连接的有限元分析
- 作者：Alok Tripathi;S. K. Srivastava
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Bolted connections;
- Flush endplate connection (FEC);
- Semi-rigid connection;
- FEA;
- Moment rotation curve;
11.Automation of Cam and Follower Machine

机译：凸轮和从动机的自动化
- 作者：J. P. Modak;G. D. Mehta;Atul Meshram;Promod L. Nichat
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
12.Shear Wave Interaction by Edge Crack

机译：边缘裂纹引起的剪切波相互作用
- 作者：Sanjoy Basu;S. C. Mandal
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Edge crack;
- Elastic strip;
- Fourier transform;
- Integral equations;
- Crack opening displacement;
- Stress intensity factor;
13.Design and Fabrication of Solar Chimney Collector for 100W

机译：100W太阳能烟囱收集器的设计与制作
- 作者：Umesh Garg;S. Kumar;Yashpal Jindal;Vikas Jindal;Anil Taneja
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Hybrid Chimney;
- Solar Collector;
14.Effects of Fibre Content on Some Mechanical Properties of Kenaf/Polyester Resin Composites

机译：纤维含量对红麻/聚酯树脂复合材料某些力学性能的影响
- 作者：A. Danladi;T. S. Utenwojo
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Kenaf fibres;
- Polyester resin;
- Breaking strength;
- Initial modulus;
- Work of rupture;
15.Design against Dynamic Failure of Structures with Beams and Columns under Excitation

机译：激励下梁柱结构的动力破坏设计
- 作者：Christopher C. Ihueze;Pius. C. Onyechi;H. Aginam;Godwin. C. Ozoegwu
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Fundamental frequency;
- Degeneracy;
- Excitation;
- Mode shape;
16.Effect of Ply Orientation on Nonlinear Static Behaviour of Skew Bidirectional FRP Laminates with Circular Cutout

机译：层取向对圆形开孔斜向双向FRP层压板非线性静力学性能的影响
- 作者：V. V. Sridhara Raju;V. Bala Krishna Murthy;J. Suresh Kumar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Bidirectional;
- Ply orientation;
- FEM;
- Cutout;
- Geometric Nonlinearity;
17.Radiation and Mass Transfer Effects on MHD Oscillatory Flow of a Chemically Reacting Fluid in a Channel Filled with Porous Medium

机译：辐射和传质对填充多孔介质的通道中化学反应流体的MHD振荡流的影响
- 作者：S. Suneetha;P. Bala Anki Reddy;N. Bhaskar Reddy
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Oscillatory flow;
- Porous medium;
- Heat and mass transfer;
- Magnetic field;
- Radiation;
- Chemical reaction;
18.Development of Strong Belts by using Ultra High Tenacity Weft Knitted Fabrics

机译：使用超高强度纬编针织面料开发强力皮带
- 作者：Dariush Semnani;Kamran Matin;Mohammad Sheikhzadeh
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第2期
- Weft knitted fabrics;
- Technical textile;
- Strong belts and fibrous structure;
19.Variation of Pinch Point, Stack Temperature on the Efficiency of Combined Cycle Gas-Steam Power Plant

机译：夹点，烟囱温度对联合循环燃气-蒸汽电厂效率的影响
- 作者：K. P. Tyagi;M. N. Khan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第1期
- Ambient Temperature;
- Combine cycle;
- Exhaust Temperature;
- Stack Temperature;
20.Active Vibration Suppression of Piezoelectric Laminated Beam based on Efficient Finite Element Model using LQG Controller

机译：基于LQG控制器的有限元模型压电层合梁的主动振动抑制。
- 作者：Najeeb ur Rahman;M. Naushad Alam
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第1期
- Zigzag Theory;
- Hybrid Beam;
- LQG Controller;
- ABAQUS;
21.Different Codal Provisions of Reinforced Concrete Beam Column Joints Subjected to Seismic Loads

机译：地震作用下钢筋混凝土梁柱节点的不同养护规定
- 作者：Yogesh D. Patil;H. S. Patil;M. N. K. A. Raju
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第1期
- Framed joints;
- Concrete compressive strength;
- Anchorage length;
- Shear Strength;
22.Experimental and Numerical Modeling Study of Ductile Tearing Fracture in The Welded Joints

机译：焊接接头延性断裂的实验与数值模拟研究
- 作者：M. Zemri;B. Bouchouicha;M. Mazari;A. Imad
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第2期
- Ductile fracture;
- Growth of cavities;
- Local approach;
- Tenacity;
- A48AP steel;
23.A Concise Mathematical Approach for Establishing Rotation Restraint Operating Requirement For a Bimetallic Stranded Cable

机译：建立双金属绞线电缆旋转约束操作要求的简便数学方法
- 作者：Shibu G.;Parthasarathy N. S.
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第2期
- Wire rope mechanics;
- Torque balance;
- Non twisting cable rotation resistant cable;
24.Propagation of SH-Type Waves in Three Layered Medium Including a Fluid-Saturated Porous Solid Stratum

机译：SH型波在含流体饱和多孔固体层的三层介质中的传播
- 作者：P. C. Pal;Banti Sen
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第1期
- SH type waves;
- Fluid saturated porous layer;
- Inhomogeneity;
- Anisotropy;
- Wave number;
25.Heat and Mass Transfer Over an Accelerating Surface with Heat Source in Presence of Suction and Magnetic Field

机译：吸力和磁场作用下热源在加速表面上的传热和传质
- 作者：A. A. Samaan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第2期
26.Effect of Gear Parameters on the Stress in Metal Helical Gears

机译：齿轮参数对金属斜齿轮应力的影响
- 作者：Toni Jabbour;Ghazi Asmar;Mohammad Abdel Wahab;Hussein Rammal
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第1期
27.Heat and Mass Transfer Over an Accelerating Surface with Heat Source in Presence of Magnetic Field

机译：在磁场作用下带有热源的加速表面上的热量和质量传递
- 作者：A. A. Samaan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第1期
28.Theoretical Analysis and Numerical Simulation of One-Dimensional Premixed Laminar Flame

机译：一维预混层流火焰的理论分析与数值模拟
- 作者：R. Renane;A. Nour
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第2期
- Combustion;
- Flame;
- Dissociation;
- Chemical species;
- Adiabatic temperature;
- Combustion chamber;
29.Analytical and Numerical Modeling of Cantilever Beams Made of Isotropic Polymer, Mild Steel, and Aluminum under Lateral Vibration Along With ANSYS Analysis Comparison

机译：各向同性聚合物，低碳钢和铝制成的悬臂梁在横向振动下的分析和数值建模以及ANSYS分析比较
- 作者：Emad. Iranmanesh;V. S. Jadhav
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2012年第1期
- Modal Analysis;
- Nodal solution;
- Shape functions;
- ANSYS and Analytical Analysis;
30.Finite Element Modelling and Frequency Response Analysis of Front Cradle

机译：前支架的有限元建模和频率响应分析
- 作者：Chetan Suresh Rathi;Vilas B. Shinde
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
31.Analysis on High Speed Jet Flow Characteristics Using CFD (Gambit-Fluent)

机译：使用CFD（Gambit-Fluent）分析高速射流特性
- 作者：Yaknesh S.;Rajamurugu N.
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- High Speed Jet;
- GAMBIT;
- Turbulence plot;
- Nozzle;
- Optimization;
32.A Study on Noise Observed in Natural Frequency Measurement by Frequency Response Function (FRF) Plots of Metallic Tubes for Aerospace Applications

机译：航天应用金属管频率响应函数（FRF）图在自然频率测量中观察到的噪声的研究
- 作者：M. Ramanathan;R. Femi;J. Stalin;D. Karthikesan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Vibration;
- Accelerometer;
- Natural frequency;
- Phase;
- Noise;
33.Qualitative Comparison of Experimental Result with Numerical Simulation of Flow past a Circular Cylinder

机译：实验结果的定性比较与流经圆柱的数值模拟
- 作者：Saleem Anwar Khan;Mohammad Rafiq Saifi;Samiullah Ansari;Altaf Hussain;Aarif Hussain Siddique
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Circular Cylinder;
- Laminar;
- Reynolds number;
- Flow bench;
- Fluent;
34.Deflection and Stress Analysis of a Cantilever and its Validation Using ANSYS

机译：悬臂的挠度和应力分析及其ANSYS验证
- 作者：Gargi Majumder;Kaushik Kumar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第2期
- Cantilever;
- Loading;
- ANSYS;
- Element;
- Cartesian Coordinate System;
35.Experimental Studies of Active Combustion Control

机译：主动燃烧控制的实验研究
- 作者：Debanik Bhattacharjee
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Combustion Instability;
- Active Control;
- Controller system;
- Rijke Tube;
36.Models of Active Control of Combustion Instabilities

机译：燃烧不稳定性的主动控制模型
- 作者：Debanik Bhattacharjee
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第2期
- Combustion Instability;
- Active Control;
- Controller systems;
37.Qualitative Comparison of Experimental Result with Numerical Simulation of Flow past a Circular Cylinder

机译：实验结果的定性比较与流经圆柱的数值模拟
- 作者：Saleem Anwar Khan;Mohammad Rafiq Saifi;Samiullah Ansari;Altaf Hussain;Aarif Hussain Siddique
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第2期
- Circular Cylinder;
- Laminar;
- Reynolds number;
- Flow bench;
- Fluent;
38.Integrated Motor Assist for Hybrid Two Wheelers

机译：混合动力两轮车集成马达辅助
- 作者：C. V. Agilan;R. Venkatasamy
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Hybrid;
- Motor Assist;
- Coupling;
- Gear Box;
- Microcontroller;
39.An FEM Approach to Analysis of Media used in the Spiral Flow Assisted Abrasive Flow Machining

机译：螺旋流辅助磨料流加工中介质分析的有限元方法
- 作者：Gaurav Arora;Apurbba Kumar Sharma;Papiya Bhowmik;Saigeeta Priyadarshini
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第2期
- AFM;
- SFAAFM;
- Finite element analysis;
- COSMO FLO-WORKS;
40.A Study on Noise Observed in Natural Frequency Measurement by Frequency Response Function (FRF) Plots of Metallic Tubes for Aerospace Applications

机译：航天应用金属管频率响应函数（FRF）图在自然频率测量中观察到的噪声的研究
- 作者：M. Ramanathan;R. Femi;J. Stalin;D. Karthikesan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第2期
- Vibration;
- Accelerometer;
- Natural frequency;
- Phase;
- Noise;
41.Microstructural Characterization of Different Steels Using Barkhausen Noise Measurement

机译：利用巴克豪森噪声测量技术对不同钢种进行显微组织表征
- 作者：D. S. Yadav;M. Z. Khan Yusufzai;M. Vashista
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Microstructure;
- Barkhausen Noise;
- Domain wall;
- Steel;
42.Application of TQM and Engineering Techniques to Optimize Quality of Paint on Steering wheel Components: A Literature Review

机译：TQM和工程技术在方向盘部件上油漆质量优化中的应用：文献综述
- 作者：Akanksha Tiwari;Lalit Upadhayay
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Optimization;
- Paint Quality;
- Automotive Coatings;
- Quality control;
- Paint thickness;
43.Design of Climbing Mechanism for a Tree Climbing Robot

机译：爬树机器人的爬升机构设计
- 作者：Hariskrishna TV;Vineet Pandey;PDPR Harshavardhan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第2期
44.Design of Climbing Mechanism for a Tree Climbing Robot

机译：爬树机器人的爬升机构设计
- 作者：Hariskrishna TV;Vineet Pandey;P. D. P. R. Harshavardhan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
45.Models of Active Control of Combustion Instabilities

机译：燃烧不稳定性的主动控制模型
- 作者：Debanik Bhattacharjee
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Combustion Instability;
- Active Control;
- Controller systems;
46.Experimental Study on a Flat Plate Solar Collector

机译：平板式太阳能集热器的实验研究
- 作者：H. Vettrivel;P. Mathiaragan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Collector-efficiency;
- Thermosyphon;
- Glazingl;
47.Modeling and Understanding the Physics of Bungee Trampoline Jumping

机译：建模和理解蹦床蹦极跳的物理原理
- 作者：Ashwin Ramachandran
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Bungee trampoline jumping;
- Spring-mass model;
- Free vibration problem;
48.Experimental Studies of Active Combustion Control

机译：主动燃烧控制的实验研究
- 作者：Debanik Bhattacharjee
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第2期
- Combustion Instability;
- Active Control;
- Controller system;
- Rijke Tube;
49.Design Considerations for Safety in Automobiles: A System Approach

机译：汽车安全设计注意事项：一种系统方法
- 作者：Mir Irfan Ul Haq;Ankush Anand;Tawqeer Nasir;Dhananjay Singh
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Design;
- Automotive;
- Safety;
50.Design and Structural Analysis of Jute/E-glass Woven Fiber Reinforced Epoxy Based Hybrid Composite Leaf Spring under Static Loading

机译：黄麻/电子玻璃纤维增强环氧树脂基复合材料复合板簧的静载荷设计与结构分析
- 作者：Amrita Srivastava;Sanjay Choudhary
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2013年第1期
- Leaf spring;
- Jute;
- E-glass;
- Epoxy;
- Tensile strength;
- Stress;
- Deflection;
- FEA;
51.Modeling and Contact Analysis of Crowned External Involute Spur Gears

机译：渐开线外渐开线圆柱齿轮的建模和接触分析
- 作者：R. Gurumani;S. Shanmugam
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- Tooth modification;
- Crowning;
- Tooth contact analysis;
- Stress analysis;
- Contact ellipse;
52.A Comparative Study on the Performance and Suitability of Feature Extraction Algorithms on Tungsten Inclusion Thermographs for On-line Weld Monitoring

机译：钨夹杂物热像图特征提取算法在线焊接监控性能和适用性的比较研究
- 作者：N. M. Nandhitha;N. Manoharan;B. Sheela Rani;B. Venkataraman;P. Kalyanasundaram;Baldev Raj
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
- Thermographs;
- Tungsten Inclusion;
- Morphological image processing;
- Region Growing;
- Euclidean distance;
- Wavelet;
- Feature vector;
53.An Optimization of EDM Machining Process Parameters with Multiwall Carbon Nanotube Using Regression Analysis

机译：回归分析法优化多壁碳纳米管电火花加工工艺参数
- 作者：S. Prabhu;B. K. Vinayagam
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- Multi wall carbon nanotube;
- Electric Discharge Machining;
- Surface roughness;
- Response surface methodology;
54.Investigation of Stress Intensity Factor for a Plate with Hole Using FEA

机译：有限元分析带孔板的应力强度因子
- 作者：P. Ashok Kumar;P. Ravinder Reddy;N. Sharath Chandra;A. V. S. S. K. S. Gupta
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- Finite element analysis;
- Stress intensity factor;
- Fatigue;
- CASCA;
- FRANC 2D/L;
55.Numerical Analysis on Temperature Distribution around a Moving Heat Source Using Non-Fourier Heat Conduction

机译：非傅立叶热传导对运动热源周围温度分布的数值分析
- 作者：Ehsan Izadpanah;Shahram Talebi;Mohamad Hamed Hekmat;Azadeh Akhavan Taheri
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- Non-Fourier conduction;
- Thermal mach;
- Speeds of wave's propagation;
56.Propagation of SH-Type Waves in Three Layered Medium Including a Fluid-Saturated Porous Solid Stratum

机译：SH型波在含流体饱和多孔固体层的三层介质中的传播
- 作者：P. C. Pal;Banti Sen
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第3期
- SH type waves;
- Fluid saturated porous layer;
- Inhomogeneity;
- Anisotropy;
- Wave number;
57.Magnetohydrodynamic Convective Flow in a Rotating Channel with Hall Effects

机译：具有霍尔效应的旋转通道中的磁流体动力学对流
- 作者：G. S. Seth;S. Ansari
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
58.Strip-Saturation Model Solution for A Transversely Cracked Piezoelectric Strip

机译：横向裂纹压电条的条饱和模型求解
- 作者：R. R. Bhargava;Satish Kumar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- Piezoelectric ceramic strip;
- Strip-saturation model;
- Cracks opening displacement;
- Crack growth rate;
59.The Effects of Radiation and Hall Current on The Unsteady MHD Laminar Convective Fluid Flow Through Porous Medium Due to A Porous Rotating Disk

机译：辐射和霍尔电流对多孔圆盘引起的不稳定MHD层流对流通过多孔介质的影响
- 作者：Mona A. A. Mohamed;M. A. Hassan;Nasser S. Elgazery
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
- Chebyshev pseudospectral method;
- Hall current;
- Radiation;
- Unsteady flow;
- Porous medium;
- Rotating disk;
- Variable properties;
60.Heat and Mass Transfer Over an Accelerating Surface with Heat Source in Presence of Magnetic Field

机译：在磁场作用下带有热源的加速表面上的热量和质量传递
- 作者：A. A. Samaan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第3期
61.Mathematical Model of Aqueous Humor Flow in Posterior Chamber of The Eye

机译：眼后房幽默水流的数学模型
- 作者：Ram Avtar;Rashmi Srivastava
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第3期
- Aqueous humor;
- Posterior chamber;
- Iris;
- Resistance;
- Aqueous flux;
62.Effect of Hall Current on Steady MHD Couette Flow in A Rotating System

机译：霍尔电流对旋转系统中稳定MHD Couette流量的影响
- 作者：N. Ahmad;S. Kumari
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
63.Numerical Study of The Steady MHD Flow Past an Infinite Plane Wall with Suction or Injection at the Stagnation Point With Magnetic Field by Fifth-Degree B-spline Collocation

机译：五阶B样条搭配法在磁场滞止点通过吸力或注入作用通过无限平面壁的稳态MHD流动的数值研究
- 作者：D. C. Joshi
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- MHD flow;
- Momentum thickness;
- Displacement thickness;
- Skin-friction;
- Collocation;
- Fifth degree B-spline;
64.Viscoelastic Effects on the Unsteady Convective Diffusion in a Synovial Fluid of Human Joints

机译：粘弹性对人体关节滑液中非稳态对流扩散的影响
- 作者：Rekha Bali;S. K. Sharma
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- Viscoelastic fluid;
- Generalised dispersion;
- Synovial fluid;
- Articular Cartilage;
- Nutrition;
65.Integration of Material Design and Product Design - A FEA based approach

机译：材料设计和产品设计的集成-基于FEA的方法
- 作者：K. Soorya Prakash;S. S. Mohamed Nazirudeen;M. Joseph Malvinraj
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第3期
- Metal casting;
- Valve;
- Fluids;
- CFD;
- FEA;
- Optimization;
- AI;
66.MHD Boundary Layer Flow and Heat Transfer of Viscoelastic Fluid Past a Stretching Plate Through a Porous Medium

机译：MHD边界层流动和粘弹性流体通过多孔板通过拉伸板的传热
- 作者：K. Das;S. Jana
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
- Stretching plate;
- Porous medium;
- Alfven velocity;
- Thermal relaxation;
- Thermal conductivity;
- Magnetic permeability;
- Kinematics viscosity;
67.Solution by Group Invarient Method of Imbibition Phenomenon Arising in Fluid Flow Through Homogenos Porous Media

机译：均相多孔介质中流体流动的吸着现象的群不变方法求解
- 作者：M. N. Mehta;Mitesh S. Joshi
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
68.Magnetic Field Effect on A Transient Free and Forced Convective Flow Through A Porous Medium Bounded By An Impulsively Fixed Infinite Vertical Plate

机译：磁场对脉冲固定无限垂直板所包围的多孔介质中瞬态自由和强迫对流的影响
- 作者：N. Ahmed;H. K. Sarmah;S. Ahmed
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
69.Analysis of Adhesive Bonded Single Lap Joints in Hybrid Composites Subjected to Transverse Load With LC-US End Conditions

机译：LC-US终端条件下承受横向载荷的混杂复合材料中单键搭接接头的分析
- 作者：M. Venkateswara Rao;K. Mohana Rao;V. Rama Chandra Raju;V. Bala Krishna Murthy;V. V. Sridhara Raju
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
- SLJ;
- FEM;
- FRP;
- Inter-laminar stresses;
70.Some Common Fixed Point Theorems for Random Operators in Hilbert Spaces

机译：Hilbert空间中随机算子的一些常见不动点定理
- 作者：Vanita Ben Dhagat;Ramakant Bhardwaj;R. N. Yadava
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
- Hilbert spaces;
- Sequence;
- Common fixed point;
- Random operators;
71.Effectiveness of Angle Shaped Footings Resting on Soil under Eccentric Inclined Load

机译：偏心倾斜荷载作用于土壤的角形支脚的有效性
- 作者：Dayanand P. Joshi;Hemant K. Mahiyar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
- Cohesion less soil;
- Square Footings;
- Eccentric load;
- Depth and angle of footing projection;
- Eccentricity width ratio;
72.Peristaltic Pumping of a Two-layered Particulate Suspension in a Circular Cylindrical Tube

机译：圆柱形圆柱管中两层颗粒悬浮液的蠕动泵送
- 作者：Amit Medhavi;U. K. Singh
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第3期
- Peripheral layer;
- Erythrocyte;
- Hematocrit;
- Pressure drop;
- Flow rate;
- Friction force;
73.Strength of High Performance Ferrocement Composite under Compression-Compression

机译：高性能压缩复合材料的压缩压缩强度
- 作者：Rathish Kumar Pancharathi;B. C. Kameswara Rao
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第2期
- Ferrocement;
- Biaxial;
- Compression-compression;
- Interaction curve;
- Analytical model;
74.Three-Dimensional Finite Element Analysis of Adhesively Bonded Single Lap Joints in Laminated FRP Composites Subjected To Thermal Loading With LC-US End Conditions

机译：LC-US终端条件下热负荷下FRP复合材料中单键搭接接头的三维有限元分析
- 作者：M. Venkateswara Rao;K. Mohana Rao;V. Rama Chandra Raju;G. Nageswara Rao;V. Bala Krishna Murthy;V. V. Sridhara Raju
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第1期
- SLJ;
- FEM;
- FRP;
- Inter-laminar stresses;
75.Different Codal Provisions of Reinforced Concrete Beam Column Joints Subjected to Seismic Loads

机译：地震作用下钢筋混凝土梁柱节点的不同养护规定
- 作者：Yogesh D. Patil;H. S. Patil;M. N. K. A. Raju
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2009年第3期
- Framed joints;
- Concrete compressive strength;
- Anchorage length;
- Shear Strength;
76.Some Experimental Studies on Utilization of Jatropha Curcus and Pongamia Pinata Biodiesel Blends in an Agriculture Diesel Engine

机译：农用柴油机利用麻疯树和樟子松生物柴油混合物的一些实验研究
- 作者：Ashish Karnwal;Naveen Kumar;Mohd. Muzaffarual Hasan;Zahid A. Khan;Arshad Noor Siddiqui
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Jatropha oil;
- Karanja oil;
- Biodiesel;
- Transesterification;
- Smoke opacity;
77.Study of Inlet conditions on Diffuser Performance

机译：进气条件对扩压器性能的研究
- 作者：B. B. Arora;Manoj Kumar;Subhashish Maji
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
78.Involution and Body Force Method for Solution of Half Plane Problems with Elastic Inclusion

机译：对合和体力法求解弹性夹杂半平面问题
- 作者：D. S. Ramakrishna;B. S. Manjunath
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
79.Modelling of Multiple Injections of HCCI Engine Using Computational Fluid Dynamics

机译：基于计算流体动力学的HCCI发动机多次喷射建模
- 作者：K. Apparao;P. Srinivasa Rao;K. Rajagopal
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Multi injection;
- Pilot injection;
- Triple injection;
- Duration of injection;
- Cfd;
80.New Theoretical Calculation of Limit Drawing Ratio by Taking into Account Material Parameters Changes during Deep Drawing of Cylindrical Cup

机译：考虑到圆柱杯深冲过程中材料参数变化的极限拉伸比的新理论计算
- 作者：Najmeddin Arab
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Limit Drawing Ratio;
- Cylindrical Cup Drawing;
- Deep Drawing;
81.Surface Waves in Non-Homogeneous, General Visco-Elastic Media of Higher Order

机译：非均质，一般高阶粘弹性介质中的表面波
- 作者：K. C. Gupta;Munish Sethi;Rajneesh Kakar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Rayleigh;
- Love Waves;
- Visco-Elastic solid medium;
82.Assessment of Lubrication Regime in Cylindrical Roller Bearing Running with Cage and Roller Slip

机译：带保持架和滚子滑移的圆柱滚子轴承的润滑方式评估
- 作者：A. Selvaraj;R. Marappan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Cage slip;
- Roller slip;
- Lubrication regime;
- Elastohydrodynamic regime;
- And Frictional Force;
83.Comparative Study of Friction Factor for Turbulent Flow Rough Pipe

机译：湍流粗管摩擦系数的比较研究
- 作者：Mohd Nadeem Khan;Mohd Islam;M. M. Hasan
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Friction Factor;
- Relative Surface Roughness;
- Turbulent Flow;
- And Reynolds Number;
84.Reflection and Refraction of Plane Waves in Randomly Stratified Media

机译：平面波在随机分层介质中的反射和折射
- 作者：P. C. Pal;Banti Sen
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Stratified media;
- Transverse waves;
- Anisotropic parameter;
- Reflection-refraction coefficient;
85.Sustainable Engineering - A Focus on Green Product Design

机译：可持续工程-以绿色产品设计为重点
- 作者：Francis N. Francis
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Quality Function Deployment;
- Elaboration Process;
- Life Cycle Assessment;
- Environmental Metrics;
- Sustainable Engineering;
86.Effect of Operating Parameters on Cut-off Temperatures of Vapor Absorption Refrigeration Systems

机译：操作参数对蒸气吸收式制冷系统临界温度的影响
- 作者：K. P. Tyagi;R. S. Prasad;S. Tiwari;N. Sharma
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Vapor Absorption Refrigeration System;
- Cut-off Temperature;
- Duhring Plot;
87.Vibration based Gearbox Fault Detection Using Artificial Neural Networks

机译：基于人工神经网络的基于振动的变速箱故障检测
- 作者：P. V. Srihari;K. Ramachandra;K. Govindarajulu
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Gearbox Fault Diagnosis;
- Vibration signal;
- Artificial Neural Networks;
- Training data;
- Optimization;
- Back propagation Algorithm;
88.The Variation in Dispersion Relations of Ion Acoustic Waves Due to the Presence of Dust in a Single Walled Carbon Nanotube

机译：单壁碳纳米管中灰尘的存在导致离子声波色散关系的变化
- 作者：K. A. Vijayalakshmi;Binumol P. Kuriakose;T. P. Nafeesa Baby;Seema Pradeepkumar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Plasmon excitations;
- Dispersion relations;
- Ion acoustic waves;
89.Dispersion of Shear Waves in an Irregular Magnetoelastic Self-Reinforced Layer Sandwiched between two Isotropic Half-Spaces

机译：夹在两个各向同性半空间之间的不规则磁弹性自增强层中的剪切波的色散
- 作者：Amares Chattopadhyay;Shishir Gupta;Sanjeev A. Sahu;Abhishek K. Singh
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- SH waves;
- Magnetoelastic;
- Self-reinforced;
- Irregularity of interface;
- Dispersion equation;
- Perturbation;
90.Unsteady Couette Flow through a Porous Medium in a Rotating System

机译：旋转系统中不稳定的Couette流经多孔介质的流动
- 作者：B. G. Prasad;Rajnish Kumar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Newtonian fluid;
- Porous medium;
- Boundary layer;
- Laplace transform;
- Non-torsional;
- Rotating system;
91.Dynamic Buckling of Linear Hardening Columns

机译：线性淬火柱的动态屈曲
- 作者：A. Abdel Gawad;I. Rashwan;M. Nassar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Dynamic buckling;
- Imperfections;
- Strain rate materials;
- Linear hardening;
- Amplification function;
92.Generalize Equations for Predicting the Performance of Gas Turbine Cycle

机译：通用方程式预测燃气轮机循环性能
- 作者：K. P. Tyagi;M. N. Khan;R. S. Prasad
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Optimization;
- Sp. work output;
- Thermal Efficiency;
93.Optimization of Machining Parameters of Die Sinking EDM of AISI D2 Tool Steel with Multi Wall Carbon Nano Tube using Taguchi Method

机译：Taguchi法优化多壁碳纳米管AISI D2工具钢的冲模电火花加工参数
- 作者：S. Prabhu;B. K. Vinayagam
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第1期
- Multi wall carbon nano tube;
- Electric Discharge Machining process;
- Surface roughness;
- Taguchi method;
- ANOVA Analysis;
94.Performance and Emission Analysis on a Direct Injection Diesel Engine Using Biodiesel - NOME (Neem Oil Methyl Ester) Blends

机译：使用生物柴油-NOME（印em油甲基酯）混合物的直喷柴油机的性能和排放分析
- 作者：N. Vaishnavi;E. Vadivel
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- Neem oil;
- Biodiesel;
- Performance and emission testing;
95.Design and Analysis of Propeller Shaft - A Finite Element Approach

机译：螺旋桨轴的设计与分析-有限元法。
- 作者：M. Joseph Malvin Raj
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2010年第3期
- FEA;
- Propeller shaft;
- Material design;
- Finite Element Analysis;
- Failure analysis;
96.MHD Flow of Visco-Elastic Fluid between a Stretching Sheet and an Oscillatory Porous Parallel Plate with Constant Suction

机译：恒定吸力的拉伸片和振动多孔平行板之间的粘弹性流体的MHD流动
- 作者：Rita Choudhury;Hridi Ranjan Deb
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- MHD;
- Visco-elastic;
- Stretching sheet;
- Oscillating porous plate;
- Multiple perturbation;
97.Micromechanical Prediction of Poisson's Ratio Effect on FRP Composites Under Transverse Loading

机译：横向载荷下泊松比对FRP复合材料的微观力学预测
- 作者：P. Phani Prasanthi;V. Bala Krishna Murthy
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- FEM;
- FRP;
- Micromechanics;
- Unit Cell;
98.Simulation and Numerical Investigation of Elasto-Plastic Analysis of an Edge Crack using FEM and EFGM

机译：有限元和EFGM边缘裂纹弹塑性分析的数值模拟研究
- 作者：B. Aswani Kumar;Ch. Raghuveer;M. Vijaya Sekhar Babu;K. M. K. Chowdary
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第1期
- Elasto-plastic;
- Edge crack;
- Element free Galerkin method and plane stress;
99.Theoretical and Experimental Vibration Analysis of Rotating Beams with ACLD Treatment using Standoff Layer

机译：采用支座层进行ACLD处理的旋转梁的理论和实验振动分析
- 作者：Sanjiv Kumar;Rakesh Sehgal;Rajiv Kumar
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- ACLD treatment;
- Rotating beam;
- Stand off Layer;
100.Slope Stability and Implantation of Buildings

机译：边坡的稳定性和建筑物的植入
- 作者：Boualem El Kechebour;Ammar Nechnech
- 期刊名称：《International Journal of Theoretical and Applied Mechanics》 | 2011年第3期
- Distance;
- Implantation;
- Building;
- Slope;
- Probabilistic method;
- Plastiflcation;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号