首页>外文期刊>International Journal of Precision Technology

International Journal of Precision Technology

中文名称：国际精密技术杂志》上

ISSN：1755-2060
出版周期：Quarterly

发文量：132

期刊论文

热门论文

年度选择

2021
- 第1期
2020
- 第1期
- 第3期
- 第4期
2019
- 第4期
2018
- 第1期
2017
- 第1期
- 第4期
2016
- 第1期
- 第2期
- 第4期
2015
- 第1期
- 第2期
- 第4期
2014
- 第2期
- 第4期
2013
- 第2期
- 第4期
2012
- 第1期
2011
- 第1期
- 第3期
- 第4期
2010
- 第4期
2009
- 第2期
2007
- 第1期

更多>>

全选（0）

1.An experimental investigation on the machinability of powder metal steel

机译：粉末金属钢切削性能的实验研究
- 作者：A. K. Srivastava
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Powder metals;
- P/Ms;
- Coated inserts;
- Machinability;
2.Rotary ultrasonic machining of titanium alloy (Ti-6Al-4V): effects of tool variables

机译：钛合金（Ti-6Al-4V）的旋转超声加工：工具变量的影响
- 作者：N. J. Churi;Z. J. Pei;C. Treadwell
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Cutting force;
- Diamond grinding;
- Grinding wheel;
- Rotary ultrasonic machining;
- RUM;
- Surface roughness;
- Titanium alloy;
- Tool wear;
3.The use of TiAlN coated carbide tool when finish machining hardened stainless steel

机译：在精加工淬硬不锈钢时使用TiAlN涂层硬质合金刀具
- 作者：M. Y. Noordin;Y. C. Tang;D. Kurniawan
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Hard turning;
- Coated carbide;
- Tool life;
- Surface roughness;
- Wear mechanisms;
4.Tool failure modes and wear mechanism of coated carbide tools when drilling Ti-6Al-4V

机译：Ti-6Al-4V钻孔时涂层刀具的失效模式和磨损机理
- 作者：E. A. Rahim;S. Sharif
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Drilling;
- Tool wear;
- Tool life;
- Wear mechanism;
- TiAlN;
- Supernitride;
5.Injection mould with permeability utilised Metal Laser Sintering Combined with High Speed Milling

机译：利用金属激光烧结结合高速铣削的具有渗透性的注塑模具
- 作者：M. Kojima;H. Narahara;H. Suzuki;H. Koresawa;S. Abe
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Rapid prototyping;
- Milling;
- Injection moulding;
- Laser sintering;
- Layer fabrication;
6.Surface integrity of AISI D2 when turned using coated and uncoated carbide tools

机译：使用涂层和未涂层的硬质合金刀具旋转时AISI D2的表面完整性
- 作者：C. H. Che Haron;J. A. Ghani;G. A. Ibrahim
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Coated and uncoated carbide;
- Hardness;
- Topography;
- Roughness;
7.Classical cascade and sliding mode control tracking performances for a xy feed table of a high-speed machine tool

机译：高速机床xy进给台的经典级联和滑模控制跟踪性能
- 作者：Z. Jamaludin;H. V. Brussel;J. Swevers
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Linear drive;
- Robustness;
- Cascade controller;
- Sliding mode;
- Quadrant glitch;
8.Hard turning of stainless steel using wiper coated carbide tool

机译：使用带有刮水涂层的硬质合金刀具对不锈钢进行硬车削
- 作者：M. Y. Noordin;D. Kurniawan;S. Sharif
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Hard turning;
- Martensitic stainless steel;
- Wiper geometry;
- Tool life;
- Wear mechanisms;
- Surface roughness;
9.Mapping geometry errors of five-axis machine tools using decouple method

机译：用解耦法绘制五轴机床的几何误差
- 作者：Y. Y. Hsu;S. S. Wang
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Five-axis machine tools;
- Error compensation;
- Geometry errors;
10.Analysis of abrasive waterjet factors influencing the cast aluminium surface roughness

机译：影响铸铝表面粗糙度的磨料水射流因素分析
- 作者：S. Hloch;M. Gombar;J. Valicek
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Modelling;
- Factor analysis;
- Aluminium;
- Average roughness;
11.Wear mechanism and failure mode of P10 TiN coated carbide tools

机译：P10 TiN涂层硬质合金刀具的磨损机理和失效模式
- 作者：A. G. Jaharah;C. H. Che Haron;M. Z. Omar;M. J. Ghazali
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Wear mechanism;
- Failure mode;
- TiN coated tools;
- Hardened steel;
12.The effect of multiple pass cutting on surface integrity when hard turning of AISI D2 cold work tool steel

机译：AISI D2冷作工具钢硬车削时多道次切削对表面完整性的影响
- 作者：M. A. Kamely;M. Y. Noordin;V. C. Venkatesh
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Hard turning;
- AISI D2;
- Ceramic;
- Multiple pass cutting;
- Surface integrity;
13.Recent advances in colour rapid prototyping

机译：彩色快速成型的最新进展
- 作者：D. X. Wang;H. W. Leng;S. Chen
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Colour;
- Texture;
- Rapid prototyping;
14.Cost calculation for recycled abrasives and for abrasive selecting in abrasive waterjet machining

机译：再生磨料的成本计算以及磨料水刀加工中磨料的选择
- 作者：V. N. Pi;A. M. Hoogstrate
- 期刊名称：《International Journal of Precision Technology》 | 2007年第1期
- Abrasive waterjet;
- AWJ;
- Abrasive recycling;
- Cost calculation;
15.FE evaluation of effect of groove geometry on roller and hydraulically expanded joint strength

机译：有限元评估凹槽几何形状对滚子和水力膨胀接头强度的影响
- 作者：A. S. Al-Aboodi;Nesar Merah;Abdel Rahman N. Shuaib;Yaagoub Al-Nassar
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- Groove;
- Tube sheet;
- Finite element;
- Heat exchanger;
16.Friction and wear behaviour of boron mixed brake pad

机译：硼混合制动片的摩擦磨损性能
- 作者：Y. B. Mohd Nizam;W. B. Wan Nik;H. B. Senin
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- Friction;
- Wear;
- Boron;
- Brake pad;
17.Effect of substrate temperature on the properties of TiN coatings deposited on tool steels using ARC

机译：基材温度对使用ARC沉积在工具钢上的TiN涂层性能的影响
- 作者：M. Ali;E. Hamzah;M. R. M. Toff
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- PVD;
- Titanium nitride;
- Microstructure;
- Hardness;
- Adhesion;
18.Brazing of diamond grits with Ag-Cu-Zn alloy activated by Cr or Ti powder under different environments

机译：在不同环境下用Cr或Ti粉末活化的Ag-Cu-Zn合金钎焊金刚石砂
- 作者：Y. M. Zhou;F. L. Zhang;K. X. Fu;C. Y. Wang
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- Brazing;
- Diamond grits;
- Ag-Cu-Zn alloy;
- Environment;
19.Plasma spray ceramic coating and measurement of developed coating behaviour

机译：等离子喷涂陶瓷涂层和发达涂层性能的测量
- 作者：M.S.A. Rahim;S. Nor Hayati;H. Luay Bakir
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- Plasma sprays;
- Ceramics coating;
- Wear behaviour;
- Process parameters;
20.Kinematics of material removal process in aspheric surface generation on glass moulds

机译：玻璃模具非球面生成中材料去除过程的运动学
- 作者：V. C. Venkatesh;P. S. Vichare;S. Izman
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- Aspheric generation;
- Glass moulds;
- Diamond grinding;
21.Development of finite element simulator for forging process design using Euler's fixed meshing method

机译：欧拉固定啮合法用于锻造工艺设计的有限元仿真器的开发
- 作者：Chan Chin Wang
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- Forging simulator;
- Rigid-plastic;
- FEM;
- Finite element method;
- Euler's fixed meshing;
- Precision forging;
22.Static and dynamic mechanical properties of carbon fibre reinforced polypropylene composites

机译：碳纤维增强聚丙烯复合材料的静态和动态力学性能
- 作者：R. Varatharajan;S. K. Malhotra;L. Vijayaraghavan;R. Krishnamurthy
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- PP;
- Polypropylene;
- Moulding temperature;
- CF;
- Carbon fibre;
- DMA;
- Dynamic mechanical analysis;
23.Mechanical and wear properties of oil palm and glass fibres reinforced polyester composites

机译：油棕和玻璃纤维增强聚酯复合材料的机械和磨损性能
- 作者：Belal F. Yousif;N. S. M. El-Tayeb
- 期刊名称：《International Journal of Precision Technology》 | 2009年第2期
- Oil palm fibre;
- Polyester;
- CGRP;
- Chopped strand mat glass fibre reinforced polyester;
- Wear;
24.Influence of eccentricity and axis tilt on circularity and cylindricity assessments

机译：偏心度和轴倾斜度对圆度和圆柱度评估的影响
- 作者：M. S. Shunmugam;N. Venkaiah
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Circularity;
- Cylindricity;
- Eccentricity;
- Axis tilt;
- Limacon;
- Circle;
- Limacon-cylinder;
- Circular-cylinder;
25.A review of machine tool accuracy enhancement through error compensation in serial and parallel kinematic machines

机译：串行和并行运动学机器中通过误差补偿提高机床精度的综述
- 作者：Samir Mekid;Tunde Ogedengbe
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Error compensation;
- Technique;
- Error measurement;
- Error estimation/prediction;
- Tool path correction;
- Serial kinematic machine;
- SKM;
- Parallel kinematic machine;
- PKM;
26.On the strength of triboemission in sliding of diamond on single crystal silicon

机译：关于金刚石在单晶硅上滑动的摩擦发射强度
- 作者：Hisham A. Abdel-Aal
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Triboemission;
- Semiconductor-to-metal phase transformation;
- Metallic silicon;
27.Study of grinding mechanics by single grit grinding test

机译：通过单砂磨削试验研究磨削力学
- 作者：S. Ghosh;A. B. Chattopadhyay;S. Paul
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Single-grit;
- Diamond superabrasive;
- Ploughing;
- Grain orientation;
28.Precision cryogenic drilling, turning and grinding of Ti-64 alloys

机译：Ti-64合金的精密低温钻孔，车削和磨削
- 作者：V. C. Venkatesh;S. Izman;T. C. Yap;P. V. Brevern;N. S. M. El-Tayeb
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Precision cryogenic drilling-turning;
- Ti-64 alloys;
- Bondless diamond wheel grinding;
29.Rheological characterisation and performance evaluation of a new medium developed for abrasive flow finishing

机译：开发用于磨料流整饰的新介质的流变学表征和性能评估
- 作者：M. Ravi Sankar;V. K. Jain;J. Ramkumar;Kamal Krishna Kar
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Al alloy/SiC_p MMC;
- Rheology;
- Plasticiser;
30.Computed tomography - new and promising chances in manufacturing metrology

机译：计算机断层扫描-制造计量学的新机遇
- 作者：Albert Weckenmann;Philipp Kramer
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Manufacturing metrology;
- X-ray computed tomography;
- Coordinate metrology;
31.Monitoring and prediction of tool wear in microturning of copper

机译：铜微车削中刀具磨损的监测和预测
- 作者：P. Ranjith Kumar;A. S. S. Balan;S. Gowri
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Microturning;
- Micromachining;
- Copper;
- Tool wear;
- Tool life;
- Acoustic emission;
- Condition monitoring;
32.Application of artificial intelligence for the prediction of delamination in drilling GFRP composites

机译：人工智能在预测GFRP复合材料分层中的应用
- 作者：B. Latha;V. S. Senthilkumar
- 期刊名称：《International Journal of Precision Technology》 | 2010年第4期
- Precision hole making;
- GFRP composites;
- Artificial neural network;
- ANN;
- Drilling;
- Delamination;
33.Identification and classification of defects on highly reflective textile machinery ring components

机译：识别和分类高反射率纺织机械环件上的缺陷
- 作者：R. B. Abraham;P. S. Sonakar;M. Singaperumal;B. Ramamoorthy
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Machine vision;
- Auto-median;
- Precision defect detection;
- Dark field;
- Pattern recognition;
- Classification;
- Reflective;
- Textile ring;
34.Study of statistically control rapid casting solution of aluminium alloys using three dimensional printing

机译：三维印刷统计控制铝合金快速铸造溶液的研究
- 作者：R. Singh;J. P. Singh
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
- Three dimensional printing;
- Statistically controlled rapid casting;
- Aluminium alloy;
- Dimensional accuracy;
35.Influence of feature form deviations on CMM measurement uncertainties

机译：特征形式偏差对CMM测量不确定度的影响
- 作者：Nick Van Gestel;Philip Bleys;Frank Welkenhuyzen;Jean-Pierre Kruth
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Coordinate measuring machine;
- CMM;
- Measurement uncertainty;
- Form deviation;
- Dimensional quality control;
- Precision technology;
36.Formation of a significantly less stiff air-layer around a grinding wheel pasted with rexine leather

机译：在砂轮上涂有雷克斯皮革的空气中刚度明显降低的空气层形成
- 作者：B. Mandal;S. Majumdar;S. Das;S. Banerjee
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
- Grinding wheel;
- Stiff air layer;
- Rexine pasted wheel;
- Pitot tube;
- Grinding fluid;
37.Application of Taguchi and Box-Behnken designs for surface roughness in precision grinding of silicon

机译：Taguchi和Box-Behnken设计的表面粗糙度在硅精密磨削中的应用
- 作者：A.-R. Alao;M. Konneh
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
- Precision grinding;
- Taguchi method;
- Box-Behnken design;
- Silicon;
- Surface roughness;
- Mathematical model;
- Ductile streaks;
- Resin-bonded diamond mounted wheels;
38.Failure of flip-chip joints in passive RFID tags and an alternative joining method

机译：无源RFID标签中倒装芯片接头的失效和替代连接方法
- 作者：M. S. Islam;Z. Y. Wang
- 期刊名称：《International Journal of Precision Technology》 | 2011年第4期
- Micron-sized joint failure;
- Flip-chip;
- Precision RFID tag assembly;
- Vibration;
- S-Bond;
- Anisotropic conductive adhesive;
- ACA;
39.Surface roughness analysis on machining of nimonic C-263 alloy using ANN and RSM techniques

机译：基于ANN和RSM技术的含镍C-263合金加工表面粗糙度分析
- 作者：C. Ezilarasan;V. S. Senthil Kumar;A. Velayudham;K. Palanikumar
- 期刊名称：《International Journal of Precision Technology》 | 2011年第4期
- Nimonic C-263 alloy;
- Surface roughness;
- Response surface methodology;
- RSM;
- Artificial neural networks;
- ANN;
40.Task specific uncertainty estimation in dimensional metrology

机译：尺寸计量中特定于任务的不确定性估计
- 作者：Han Haitjema
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- CMM;
- Uncertainty;
- Monte Carlo;
- Task specific;
- Precision;
41.Investigations on wear and frictional properties of kenaf fibre polyurethane composites under dry and wet contact conditions

机译：干湿接触条件下洋麻纤维聚氨酯复合材料的磨损和摩擦性能研究
- 作者：Narish Singh;B. F. Yousif;Dirk Rilling
- 期刊名称：《International Journal of Precision Technology》 | 2011年第4期
- Adhesive wear;
- Kenaf fibre;
- Polyurethane;
- Wet contact;
- Water lubrication;
42.Machinability and surface integrity issues in finish turning of hardened steel with coated carbide, deep cryogenically treated uncoated/coated carbide inserts

机译：带有涂层硬质合金，深冷处理未涂层/涂层硬质合金刀片的淬硬钢精加工中的可加工性和表面完整性问题
- 作者：Manu Dogra;Vishal S. Sharma
- 期刊名称：《International Journal of Precision Technology》 | 2011年第4期
- CVD coated carbide-wiper geometry;
- Cryogenic treatment;
- Hard turning;
- White layer;
- Machine-affected zone;
- MAZ;
43.Etching behaviour of tungsten microtool and its applications in electrochemical micromachining

机译：钨微型工具的腐蚀行为及其在电化学微加工中的应用
- 作者：M. A. H. Mithu;G. Fantoni
- 期刊名称：《International Journal of Precision Technology》 | 2011年第4期
- Electrochemical micromachining;
- Microtool;
- Conical microhole;
- Micronozzle;
44.Control of AFM tip wear

机译：控制AFM尖端磨损
- 作者：Francesco Marinello;Enrico Savio;Leonardo De Chiffre
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Quantitative nanometrology;
- Precision microscopy;
- Atomic force microscopy;
- Tip characterisation;
- Wear control;
45.An overview of three dimensional printing for casting applications

机译：铸造应用的三维打印概述
- 作者：R. Singh
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
- Three dimensional printing;
- 3DP;
- Technological prototype;
- Rapid casting;
- RC;
- Dimensional accuracy;
- Cost effective prototype;
46.Effect of process parameters on surface roughness in EDM of tool steel by response surface methodology

机译：响应面法研究工艺参数对工具钢电火花加工表面粗糙度的影响
- 作者：M. K. Pradhan;C. K. Biswas
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
- Electrical discharge machining;
- EDM;
- Surface roughness;
- Ra;
- Response surface methodology;
- RSM;
- Scanning electron microscope;
- SEM;
47.Parametric analysis of MR polishing fluid using statistical technique

机译：使用统计技术对MR抛光液进行参数分析
- 作者：M. Das;A. Sidpara;V. K. Jain;P. S. Ghoshdastidar
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
48.Application of modern high resolution tactile sensors for micro-objects

机译：现代高分辨率触觉传感器在微物体中的应用
- 作者：A. Weckenmann;A. Schuler
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Tactile probing;
- Nanometrology;
- 3D;
- Micro-objects;
- Miniaturisation;
49.Metrological performance verification of coordinate measuring systems with optical distance sensors

机译：使用光学距离传感器的坐标测量系统的计量性能验证
- 作者：Simone Carmignato;Enrico Savio
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Precision metrology;
- Coordinate metrology;
- Optical distance sensors;
- Performance verification;
50.Precision measurement of micro-lens profile by using a force-controlled diamond cutting tool on an ultra-precision lathe

机译：通过在超精密车床上使用力控制的金刚石切割工具来精确测量微透镜轮廓
- 作者：K. W. Lee;Y. J. Noh;Y. Arai;Y. Shimizu;W. Gao
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Precision measurement;
- Surface profile;
- Micro-lens;
- Diamond cutting tool;
51.Evolutionary algorithms on diamond grinding of SiC

机译：SiC金刚石磨削的进化算法
- 作者：T. S. Lee;T. O. Ting;P. V. Rao;V. C. Venkatesh;Y. J. Lin
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
- Ceramic grinding;
- Constrained optimisation;
- Particle swarm optimisation;
- PSO;
- Differential evolution;
- DE;
- Genetic algorithm;
- GA;
52.Dimensional metrology for process and part quality control in micro manufacturing

机译：微型制造过程和零件质量控制的尺寸计量
- 作者：Hans Norgaard Hansen;Guido Tosello;Stefania Gasparin;Leonardo De Chiffre
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Precision moulding;
- Micro manufacturing;
- Dimensional metrology;
53.Large scale atomic force microscopy for characterisation of optical surfaces and coatings

机译：大规模原子力显微镜用于表征光学表面和涂层
- 作者：S. Sturwald;R. Schmitt
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Nano metrology;
- Testing;
- Precision;
- Atomic-force microscope;
- AFM;
- Micro optics;
54.Robust design of hydrodynamic bearings: adopting Taguchi methods towards zero defects of a hermetic compressor

机译：流体动力轴承的稳健设计：采用Taguchi方法实现封闭式压缩机的零缺陷
- 作者：Suresh Akella;Leela Prasad;N. Venkateswarlu
- 期刊名称：《International Journal of Precision Technology》 | 2011年第4期
- Taguchi methods;
- Hydrodynamic bearings;
- Hermetic compressors;
- Taguchi loss function;
- Robust design;
- Warranty tolerances;
55.Failure study of micron-sized flip-chip joints on passive RFID tags

机译：无源RFID标签上微米级倒装芯片接头的失效研究
- 作者：Z. Y. Wang;M. S. Islam;L. H. Dong;Y. H. Dong
- 期刊名称：《International Journal of Precision Technology》 | 2011年第1期
- Micron-sized joint failure;
- Precision RFID tag assembly;
- Vibration;
56.Phase feedback fibre interferometer for surface profiling

机译：相位反馈光纤干涉仪，用于表面轮廓分析
- 作者：X. Jiang;H. Martin
- 期刊名称：《International Journal of Precision Technology》 | 2011年第3期
- Surface metrology;
- Fibre interferometry;
- Phase shifting;
- Precision engineering;
57.Effects of the condition of the tubular electrode on hole size and shape in micro deep hole electrical discharge machining

机译：管状电极条件对微深孔放电加工中孔尺寸和形状的影响
- 作者：R. Balasubramaniam;Prabhat Ranjan;Vivek J. Borole;E. Kandaswamy;V. K. Suri
- 期刊名称：《International Journal of Precision Technology》 | 2012年第1期
- Micro EDM;
- Deep hole drilling;
- Electrode wear;
- Side ward sparking;
58.Experimental study and empirical modelling of magnetic abrasive finishing on ferromagnetic and non-ferromagnetic materials

机译：铁磁性和非铁磁性材料的磁性磨料抛光的实验研究和经验模型
- 作者：V. K. Jain;Vinod Kumar;M. Ravi Sankar
- 期刊名称：《International Journal of Precision Technology》 | 2012年第1期
- Magnetic abrasive finishing;
- MAF;
- Surface roughness;
- Stainless steel;
- Finishing forces;
- Flexible magnetic brush;
59.Effects of electrolyte composition and temperature on precision finishing of spur gears by pulse electrochemical honing (PECH)

机译：电解质组成和温度对正齿轮精加工的脉冲电化学珩磨（PECH）的影响
- 作者：J. P. Misra;P. K. Jain;N. K. Jain;H. Singh
- 期刊名称：《International Journal of Precision Technology》 | 2012年第1期
- Hybrid machining;
- Pulse electrochemical honing;
- PECH;
- Electrolyte;
- Spur gear;
60.Study on surface quality and accuracy of hard turned axial feed rollers of honing machine

机译：珩磨机硬质轴向进给辊的表面质量和精度研究
- 作者：V. R. Raju;M. Chellamalai;P. V. Shashi Kumar
- 期刊名称：《International Journal of Precision Technology》 | 2012年第1期
- Hard turning;
- Feed roller;
- Surface roughness;
- Form accuracy;
- CBN tool;
- Tool wear;
61.An approach for identification of mode in micro grooving of sintered alumina

机译：烧结氧化铝微刻槽模式识别方法
- 作者：D. Giridhar;L. Vijayaraghavan;R. Krishnamurthy
- 期刊名称：《International Journal of Precision Technology》 | 2012年第1期
- Ceramics;
- Acoustic emission;
- AE;
- Mode of grooving;
62.Optimisation of Nd:YAG laser micro-turning process using response surface methodology

机译：响应面法优化Nd：YAG激光微车削工艺
- 作者：G. Kibria;B. Doloi;B. Bhattacharyya
- 期刊名称：《International Journal of Precision Technology》 | 2012年第1期
- Laser micro-turning;
- Nd:YAG laser;
- Surface roughness Ra;
- Rt;
- Alumina;
- Response surface methodology;
- RSM;
- Sensitivity analysis;
- Micro-turning depth deviation;
63.Study of edge radius effects in mechanical micro-machining

机译：机械微加工中刃半径效应的研究
- 作者：U. Srinivas Rao;L. Vijayaraghavan
- 期刊名称：《International Journal of Precision Technology》 | 2012年第1期
- FEM;
- Edge radius;
- Micro-machining;
64.A review on the mechanical properties and machinability of natural fibre reinforced composites

机译：天然纤维增强复合材料的力学性能和可加工性研究进展
- 作者：T. Alsaeed;B. F. Yousif;H. Ku
- 期刊名称：《International Journal of Precision Technology》 | 2013年第2期
- Mechanical properties;
- Machinability;
- Synthetic fibre;
- Natural fibre and volume fraction;
65.Study of vibration frequency and abrasive particle size during cylindrical Magnetic Abrasive Finishing

机译：圆筒形磁性磨料抛光过程中振动频率和磨料粒径的研究
- 作者：K. B. Judal;Vinod Yadava;D. K. Pathak
- 期刊名称：《International Journal of Precision Technology》 | 2013年第2期
66.Modelling and optimisation of Hole Drilling Electrical Discharge Micromachining process of Ti-6Al-4V thin sheet

机译：Ti-6Al-4V薄板钻孔电火花微加工过程的建模与优化
- 作者：Rajesh Kumar Porwal;Vinod Yadava;J. Ramkumar
- 期刊名称：《International Journal of Precision Technology》 | 2013年第2期
67.Surfaces and surface metrology

机译：表面和表面计量
- 作者：M. S. Shunmugam;David J. Whitehouse
- 期刊名称：《International Journal of Precision Technology》 | 2013年第4期
- Surfaces;
- Metrology;
- Form evaluation;
- Surface topography;
- Engineered surface;
68.Engineering applications of surface topography

机译：表面形貌的工程应用
- 作者：T. R. Thomas
- 期刊名称：《International Journal of Precision Technology》 | 2013年第4期
- Function maps;
- Contact mechanics;
- Surface topography;
- Automotive tribology;
- Plasticity index;
69.Design and machining of Fresnel solar concentrator surfaces

机译：菲涅尔太阳能集热器表面的设计和加工
- 作者：Y. Cheng;X. D. Zhang;G. X. Zhang
- 期刊名称：《International Journal of Precision Technology》 | 2013年第4期
- Optical surface;
- Fresnel concentrator;
- GCM;
- Geometric construction method;
- Ultra-precision turning;
- Nonimaging optics;
70.Effects of surface modifications on steel's machinability in single-point diamond turning

机译：单点金刚石车削中表面改性对钢切削性能的影响
- 作者：Z. J. Li;F. Z. Fang;Hu Gong;X. D. Zhang
- 期刊名称：《International Journal of Precision Technology》 | 2013年第2期
- Ultra-precision machining;
- Surface modification;
- Steel;
- Machinability;
- Diamond tool wear;
71.Analysis of forces and surface roughness in magnetic abrasive finishing with a ball-end tool

机译：球头工具在磁性磨料精加工中的力和表面粗糙度分析
- 作者：Chandra Sekhar Sathua;V. K. Jain;J. Ramkumar;Ajay Sidpara
- 期刊名称：《International Journal of Precision Technology》 | 2013年第2期
- MAF;
- Magnetic abrasive finishing;
- Surface roughness;
- Forces;
72.Certification, self-calibration and uncertainty in optical surface testing

机译：光学表面测试中的认证，自校准和不确定性
- 作者：Chris J. Evans;Angela D. Davies
- 期刊名称：《International Journal of Precision Technology》 | 2013年第4期
- Calibration;
- Certification;
- Traceability;
- Interferometry;
- Confocal microscopy;
- Optical measurements;
73.ZnO nanorods for energy generation and harvesting

机译：用于能量产生和收集的ZnO纳米棒
- 作者：Indrani Dakua;Nitin Afzulpurkar
- 期刊名称：《International Journal of Precision Technology》 | 2013年第2期
- ZnO;
- Nanorod;
- Piezoelectricity;
- Energy;
- Generation;
- Harvesting;
74.Unconstrained plastic flow at surfaces in sliding and cutting

机译：滑动和切割时表面的塑料流动不受限制
- 作者：A. Mahato;Y. Guo;N. Sundaram;T. G. Murthy;C. Saldana;S. Chandrasekar
- 期刊名称：《International Journal of Precision Technology》 | 2013年第4期
- Metal;
- Sliding;
- Machining;
- Surfaces;
- Plastic deformation;
- Wear;
75.Uncertainty estimation of 2.5-D roughness parameters obtained by mechanical probing

机译：通过机械探测获得的2.5维粗糙度参数的不确定度估计
- 作者：H. Haitjema
- 期刊名称：《International Journal of Precision Technology》 | 2013年第4期
- Roughness;
- 2.5-D;
- Uncertainty;
- Traceability;
76.Optimisation of welding process parameters for distortion control with Taguchi approach

机译：Taguchi方法优化焊接工艺参数以控制变形
- 作者：Suresh Akella;B. Ramesh Kumar;Y. Krishnaiah
- 期刊名称：《International Journal of Precision Technology》 | 2013年第2期
- Welding distortion;
- Taguchi method;
- ANOVA robust design;
77.Computer-aided measurement system analysis of attribute data: a case of liner manufacturing

机译：属性数据的计算机辅助测量系统分析：以班轮制造为例
- 作者：B. Chowdhury;S. K. Deb;P. C. Das
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- MSA;
- Measurement system analysis;
- Attribute data;
- ANOVA;
- Analysis of variance;
- Refrigerator liner;
- Gage R amp;
- R;
- MINITAB;
- Repeatability;
- Reproducibility;
- Operator*part interaction;
- Total variation;
78.A study on quality of weld in flux cored arc welding process

机译：药芯焊丝焊接质量的研究
- 作者：Binoy K. Biswas;Asish Bandyopadhyay;Pradip K. Pal
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- FCAW;
- Flux cored arc-welding;
- Taguchi orthogonal array design;
- Optimisation;
- Radiographic test;
- Visual inspection;
- Tensile test;
- Boiler quality steel;
79.Numerical simulation of single resistance-capacitance pulse discharge in micro electric discharge machining of Ti-6Al-4V

机译：Ti-6Al-4V微放电加工中单阻电容脉冲放电的数值模拟
- 作者：B. Kuriachen;Jose Mathew
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
- Micro electric discharge machining;
- FEM;
- Finite element method;
- Finite volume method;
- Ti-6Al-4V;
- RC pulse discharge;
- Numerical simulation;
- Precision technology;
80.Dynamic response of a micro end mill cutter by mode superposition method and study of damping effect on its dynamic performance

机译：模式叠加法对微型立铣刀的动态响应及阻尼对其动态性能的影响研究
- 作者：K. Rajesh Babu;G. L. Samuel
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
81.Risk and hazard analysis of machines through reliability-based condition monitoring

机译：通过基于可靠性的状态监控对机器进行风险和危害分析
- 作者：R. K. Biswas;M. C. Majumdar;S. K. Basu
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- Risk analysis;
- RPN;
- Risk priority number;
- RCM;
- Reliability centred maintenance;
- LC;
- Likelihood coefficient;
- Threshold and critical modes;
82.Feasibility of using modified VPP approach in prediction of real time volume estimator (V_(RT)) in μEDM-drilling

机译：在μEDM钻孔中使用改进的VPP方法预测实时体积估计量（V_（RT））的可行性
- 作者：Chandrakant Kumar Nirala;Probir Saha
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
- μEDM-drilling;
- Volume removal per pulse;
- Modified VPP approach;
- Actual contributing pulses;
- Pulse discrimination;
83.Adaptive sampling strategies for measurement of freeform surfaces using coordinate measuring machines in continuous scanning mode

机译：在连续扫描模式下使用坐标测量机测量自由曲面的自适应采样策略
- 作者：G. Rajamohan;M. S. Shunmugam
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- Adaptive sampling;
- Continuous scanning;
- CMMs;
- Coordinate measuring machines;
- Freeform surfaces;
- Isoparametric lines;
84.An investigation into the application of Al_2O_3 nanofluid-based minimum quantity lubrication technique for grinding of Ti-6Al-4V

机译：Al_2O_3纳米流体基最小量润滑技术在Ti-6Al-4V磨削中的应用研究
- 作者：Dinesh Setti;Manoj Kumar Sinha;Sudarsan Ghosh;P. Venkateswara Rao
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
- Nanofluid;
- Ti-6Al-4V;
- MQL;
- Minimum quantity lubrication;
- Grinding;
- Al_2O_3;
- Tribofilm;
- Difficult to machine;
- Surface integrity;
85.Comparison of electrode wear in wire EDM for P-20, EN-19 and Stavax materials using artificial neural networks

机译：使用人工神经网络比较P-20，EN-19和Stavax材料的电火花线切割机中电极的磨损
- 作者：G. Ugrasen;H. V. Ravindra;G. V. Naveen Prakash;D. L. Vinay
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
- WEDM;
- Electrode wear;
- Prediction;
- ANN;
- Artificial neural network;
- Precision engineering;
86.3D micro pattern generation by electrochemical micromachining (EMM) process

机译：通过电化学微加工（EMM）工艺生成3D微图案
- 作者：S. Debnath;S. Mahata;K. Bandyopadhyay;B. Bhattacharyya
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
- EMM;
- Electrochemical micromachining;
- 3D micro pattern;
- Surface parameters;
- Depth measurement;
87.Estimation of magnetic and rheological properties of MR polishing fluid and their effects on magnetic field assisted finishing process

机译：MR抛光液的磁流变特性及其对磁场辅助精加工过程的影响
- 作者：Manas Das;V. K. Jain;P. S. Ghoshdastidar
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
- MFAF;
- Magnetic field assisted finishing;
- MRP fluid;
- Rheology;
- Magnetorheological finishing;
88.Challenges in high accuracy surface replication for micro optics and micro fluidics manufacture

机译：微光学和微流体制造领域的高精度表面复制面临的挑战
- 作者：Guido Tosello;Hans Norgaard Hansen;Matteo Calaon;Stefania Gasparin
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- Injection moulding;
- Tooling;
- Micro optics;
- Micro fluidics;
- Surface replication;
89.Effect of SiC addition on mechanical and wear characteristics of WC-32(W-Ti)C-6Co cemented carbides

机译：SiC添加对WC-32（W-Ti）C-6Co硬质合金力学性能和磨损性能的影响
- 作者：M. T. Albdiry;B. F. Yousif
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- Microstructure;
- SiC;
- Mechanical properties;
- Wear resistance;
- Cemented carbides;
90.Identification of wear in gear teeth by reverse engineering approach

机译：通过逆向工程方法识别齿轮齿磨损
- 作者：Atul Kumar;P. K. Jain;P. M. Pathak
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- Reverse engineering;
- 3D laser scanner;
- Point cloud data;
- Spur gear;
- Data acquisition;
- Pre-processing;
- Recreation of model;
- Volume;
91.Structure function-based fractal characterisation of cylinder bore surfaces using stylus profile data

机译：使用触针轮廓数据基于结构函数的气缸孔表面分形特征
- 作者：K. Deepak Lawrence;B. Ramamoorthy
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- Cylinder bore;
- Surface topography;
- Fractal dimension;
- Structure function;
- Honing;
- Topothesy;
- Stylus data;
92.Modelling and simulation of chemo-mechanical magnetorheological finishing (CMMRF) process

机译：化学机械磁流变精加工（CMMRF）过程的建模和仿真
- 作者：Prabhat Ranjan;R. Balasubramaniam;V. K. Suri
- 期刊名称：《International Journal of Precision Technology》 | 2014年第4期
- CMMRF;
- Chemo-mechanical magnetorheological finishing;
- CMP;
- Chemo-mechanical-polishing;
- MRF;
- Magnetorheological finishing;
- Polishing pressure;
93.Simultaneous position and angular error measurement of precision positioning stages using miniature interferometer with step-size variation

机译：使用步长变化小的微型干涉仪同时测量精密定位台的位置和角度误差
- 作者：Samik Dutta;Chinmoy Pati;Ranjan Sen
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- Miniature interferometer;
- Error measurement;
- Step-size variation;
- Positioning stage;
94.Experimental investigation on the influence of oil mist parameters on minimum quantity lubricated grinding of Inconel 751

机译：油雾参数对Inconel 751最小润滑量磨削影响的实验研究
- 作者：A. S. S. Balan;L. Vijayaraghavan;R. Krishnamurthy
- 期刊名称：《International Journal of Precision Technology》 | 2014年第2期
- MQL;
- Minimum quantity lubrication;
- Droplet size;
- Air pressure;
- Force components;
- Surface finish;
95.Optimum selection of machining parameters in ball end magnetorheological finishing process

机译：球端磁流变精加工中加工参数的最佳选择
- 作者：Mahendra Singh Niranjan;Sunil Jha
- 期刊名称：《International Journal of Precision Technology》 | 2015年第4期
- Sintering;
- Magnetorheological;
- Magnetorheological polishing;
- MRP fluid;
- MR finishing;
- DOE;
- Design of experiment;
- RSM;
- Response surface methodology;
- Analysis of variance;
- ANOVA;
- Optimisation;
96.Thermal effects for conventional and water-cooled thrust bearing using finite difference method: comparative analysis

机译：常规和水冷推力轴承的热效应的有限差分法：比较分析
- 作者：Farooq Ahmad Najar;G. A. Harmain
- 期刊名称：《International Journal of Precision Technology》 | 2015年第1期
- Thrust bearings;
- Hydrodynamic lubrication;
- Bearing failure;
- Hot spots;
- FDM;
- Finite difference method;
- Cooling system within pad;
97.Tribo-sustainability issues in recycled aluminium

机译：再生铝的摩擦可持续性问题
- 作者：R. Md. Nasir;Y. P. Liang;A. Y. Saad
- 期刊名称：《International Journal of Precision Technology》 | 2015年第1期
- Sliding wear;
- Friction;
- Tribo-sustainable;
- Sustainable;
- Recycle aluminium;
- Microstructure;
98.Preliminary investigations into finishing of artificial dental crown

机译：人造牙冠修整的初步研究
- 作者：Pankaj Baghel;Shreyansh Singh;Leeladhar Nagdeve;V. K. Jain;Nikita Dua Sharma
- 期刊名称：《International Journal of Precision Technology》 | 2015年第4期
- Surface roughness;
- Polishing;
- MRFF;
- Magnetorheological fluid-based finishing;
99.A study on effect of cutting conditions on surface finish in diamond turning process

机译：切削条件对金刚石车削表面光洁度影响的研究
- 作者：Prakash Vinod;Charitha M. Rao;S. Narendranath;P. V. Shashi Kumar
- 期刊名称：《International Journal of Precision Technology》 | 2015年第2期
- SPDT;
- Single-point diamond turning;
- Taguchi analysis;
- Optimisation;
- Vibrations;
- MRA;
- Multiple regression methodology;
- ANN;
- Artificial neural network;
- Prediction;
100.Empirical modelling and parametric optimisation of surface roughness of silicon carbide advanced ceramics in surface grinding

机译：碳化硅高级陶瓷表面磨削表面粗糙度的经验建模和参数优化
- 作者：Binu Thomas;Eby David;R. Manu
- 期刊名称：《International Journal of Precision Technology》 | 2015年第4期
- Surface grinding;
- Advanced ceramics;
- Surface roughness;
- Response surface methodology;
- RSM;
- Design Expert 7.0;
- ANOVA;
- Analysis of variance;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号