首页>外文期刊>International Journal of Computational Materials Science and Surface Engineering

International Journal of Computational Materials Science and Surface Engineering

中文名称：计算材料的国际期刊表面科学与工程

ISSN：1753-3465
出版周期：Bimonthly

发文量：107

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Shliomis model-based magnetic squeeze film in rotating rough curved circular plates: a comparison of two different porous structures

机译：基于Shliomis模型的旋转粗糙弯曲圆形板中的磁挤压膜：两种不同多孔结构的比较
- 作者：Jimit R. Patel;Gunamani Deheri
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2014年第1期
- Porous structures;
- Magnetic fluid;
- Curved circular plates;
- Squeeze film;
- Roughness;
- Rotation;
2.Material parameter optimisation of Ohno-Wang kinematic hardening model using multi objective genetic algorithm

机译：基于多目标遗传算法的Ohno-Wang运动强化模型材料参数优化
- 作者：Niloy Khutia;Partha Pratim Dey
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2014年第1期
- Ohno-Wang model;
- Low cycle fatigue;
- Ratcheting;
- Genetic algorithm;
- GA;
- Computational plasticity;
3.Surface properties of a laser-irradiated Al 6061 alloy

机译：激光辐照的6061铝合金的表面性能
- 作者：Georgios S. E. Antipas;Eleftherios Statharas
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2014年第1期
- Al 6061 alloy;
- KrF excimer laser;
- Mg_2Si;
- Surface treatment;
- Micro hardness;
- Corrosion;
4.Numerical modelling and experimental approach for shot velocity evaluation during ultrasonic shot peening

机译：超声喷丸过程中弹丸速度评估的数值模型和实验方法
- 作者：Fei Yin;Qingyou Han;Milan Rakita;Meng Wang;Lin Hua;Chuansheng Wang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2015年第2期
- Ultrasonic shot peening;
- Mathematical modelling;
- Shot velocity;
- Restitution coefficient;
5.Predicting the immersion corrosion behaviour in NaCl solution of atmospheric plasma sprayed alumina coatings on AZ31B magnesium alloy

机译：AZ31B镁合金上大气等离子喷涂氧化铝涂层在NaCl溶液中的浸没腐蚀行为预测
- 作者：D. Thirumalaikumarasamy;K. Shanmugam;V. Balasubramanian
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2015年第2期
- Magnesium alloy;
- Atmospheric plasma spray;
- Immersion test;
- Corrosion rate;
6.Modelling and simulation of the surface topography generation with engineered grinding wheel

机译：工程砂轮产生表面形貌的建模与仿真
- 作者：Sheng Wang;Changhe Li;Dongzhou Jia;Yanbin Zhang;Qiang Zhang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2015年第2期
- Engineered grinding wheel;
- Grinding process;
- Roughness;
- Surface topography;
- Microstructures;
7.A finite element simulation of the stress intensity factors in a plate with pre-cracked edge before and after coatings subjected to thermal loading

机译：边缘预开裂的钢板在热载荷作用前后的应力强度因子的有限元模拟
- 作者：Dipak Kumar;K. N. Pandey
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2015年第2期
- Finite element analysis;
- Thermal loading;
- Stress intensity factor;
- SIF;
- Thermal barrier coatings;
- TBCs;
8.Simulation of the bite condition of AZ31 sheet rolling

机译：AZ31板卷咬合条件的仿真
- 作者：Zuyan Liu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- bite condition;
- numerical simulation;
- sheet rolling;
- AZ31;
9.Enhancing wear resistance of squeeze cast hybrid aluminium matrix (LM24-SiC _p-coconut shell ash) composite

机译：增强挤压铸杂交铝基质的耐磨性（LM24-SiC _{P -CocoNut壳灰分）复合材料}
- 作者：M. Arulraj;P.K. Palani;M. Sowrirajan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第2期
- LM24 aluminium alloy;
- silicon carbide;
- coconut shell ash;
- CSA;
- squeeze casting;
- Taguchi method;
- genetic algorithm;
10.Molecular dynamic study of combined effects of diamond tool rake angle and d _uncut/R _edge ratio on nanomachining behaviour of monocrystalline optical silicon

机译：金刚石刀前角和D _{植物轧件联络效应的分子动态研究 / r <亚边缘比例单晶光学光学硅的纳米机械线行为}
- 作者：Lukman N. Abdulkadir;Khaled Abou-El-Hossein;Muhammad Mukhtar Liman;Odedeyi Peter Babatunde;Abubakar Ishaq Jumare
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第4期
11.The deformation and residual stress simulation of dual laser-beam bilateral synchronous welding for Al-alloy aircraft panel structure

机译：双激光束双侧同步焊接的变形和残余应力模拟铝合金飞机板结构
- 作者：Xiaohong Zhan;Yun Liu;Yao Meng;Wenmin Ou;Yanhong Wei
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第2期
- aluminium;
- numerical simulation;
- aircraft panel;
12.Simulation of thermo-mechanical behaviour of friction drilling process

机译：摩擦钻井过程热力学的仿真
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第1期
- friction drilling;
- galvanised steel;
- simulation;
- DEFORM-3D;
13.Multiple welding simulated microstructure and corrosion resistance of super austenitic stainless steel 254SMo welding heat affected zone

机译：超级奥氏体不锈钢254SMO焊接热影响区的多焊接模拟微观结构和耐腐蚀性
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第1期
- super austenitic stainless steel;
- simulated heat-affected zone;
- thermal cycles;
- heat inputs;
- precipitated phase;
- corrosion resistance;
14.Fuzzy logic approach for modelling the formation kinetics of Fe ₂B layer

机译：模糊逻辑方法，用于建模FE _{2 B层的形成动力学}
- 作者：Bendaoud Mebarek;Mourad Keddam
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第2期
- boronising;
- Fe2B;
- model;
- simulation;
- fuzzy logic;
15.The wear behaviours of G20CrNi2MoA carburised steel under different temperature

机译：不同温度下G20CRNI2MOA碳钢的磨损行为
- 作者：Songwen Zeng;Dongsheng Qian;Feng Wang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第2期
- carburised steel;
- wear behaviours;
- wear rate;
- wear mechanism;
- carbides;
16.Evaluation of ductile fracture model in bulk forming

机译：块状成型中韧性裂缝模型的评价
- 作者：Miroslav Urbánek;Jan Dzugan;Antonin Prantl
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- FEM;
- measurement;
- normalised lode angle;
- Cockcroft-Latham;
- triaxiality;
- Oyane;
17.Comparative study on effects of slurry erosive parameters on plasma sprayed flyash-Al ₂O ₃ and flyash-SiC composite coatings on Al6061 alloy

机译：浆料腐蚀参数对血浆喷涂的施用参数影响的比较研究 - Al6061合金对血浆喷涂的Flyash-Al _{2 o _{3 和粉煤灰复合涂料}}
- 作者：B.E. Naveena;R. Keshavamurthy;N. Sekhar
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第1期
- slurry erosion;
- flyash;
- Al2O3;
- SiC;
- aluminium;
- plasma spray;
- Taguchi;
18.Frictional behaviour of AA7050/B ₄C _p hybrid composites

机译：AA7050 / B _{4 C _{p 混合复合材料的摩擦行为}}
- 作者：R. Ranjith;P.K. Giridharan;M. Subramanian
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第2期
- coefficient of friction;
- COF;
- ANOVA;
- mathematical modelling;
- stir casting;
- K2TiF6;
19.The study on kinetics of metadynamic recrystallisation of a Nb-V microalloyed non-quenched and tempered steel

机译：Nb-V微合金化非淬火和钢化钢的Metadynamic重结晶动力学研究
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第1期
- metadynamic recrystallisation;
- MDRX;
- Nb-V microalloyed steel;
- non-quenched and tempered steel;
- hot compression;
20.Hot deformation behaviour and Hansel-Spittel constitutive model of Cr5 alloy for heavy backup roll

机译：重备轧辊CR5合金的热变形行为与汉塞斯 - Spittel结构型模型
- 作者：Xuewen Chen;Nana Wang;Xiang Ma;Huijun Zhou
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- Cr5 alloy steel;
- hot deformation;
- Hansel-Spittel model;
- dynamic recrystallisation;
21.Deformation control study on H-beam welded by a finite element model

机译：有限元模型焊接H梁的变形控制研究
- 作者：Xiaojie Wang;Zhaoxia Qu;Liqian Xia;Zhongqu Sun
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第1期
- H-beam welded structure;
- ultra high-strength steel;
- welding deformation;
- numerical simulation;
22.Influence of tool rotation speed on microstructural characteristics and mechanical properties of friction stir welded AA2014-T6 aluminium alloy

机译：工具旋转速度对摩擦搅拌焊接AA2014-T6铝合金微结构特性和力学性能的影响
- 作者：C. Rajendran;R. Mannoj Guru;S. Kavin;P. Navanithan;P. Nishanth Kalathil
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第4期
- friction stir welding;
- FSW;
- AA2014;
- microstructure;
- tool rotational speed;
- tensile properties;
23.Theory analysis of grinding fluid jet and its effect on surface roughness of workpiece

机译：研磨流体射流的理论分析及其对工件表面粗糙度的影响
- 作者：Yugang Wang;Shichao Xiu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2017年第1期
- Grinding fluid;
- Jet;
- Two-phase flow;
- Simulation;
- Surface roughness;
- Supply parameters;
24.Simulation study on rapid solidification of eutectic Al-Cu alloy: a molecular dynamics approach

机译：共晶Al-Cu合金快速凝固模拟研究：分子动力学方法
- 作者：Seshadev Sahoo
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2017年第1期
- Solidification;
- Simulation;
- Molecular dynamics;
- LAMMPS;
- Eutectic alloy;
25.Experimental and numerical investigations on plasma sprayed ceramic coatings with varying coating thickness

机译：不同涂层厚度等离子体喷涂陶瓷涂层的实验性和数值研究
- 作者：M. Kalayarasan;V. Prabhu Raja;S. Shankar;V. Nithin;V. Karthik
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2017年第1期
- Ceramic coatings;
- Ball indentation;
- Experimental analysis;
- Finite element analysis;
26.The potential of using superhydrophobic surfaces on airfoils and hydrofoils: a numerical approach

机译：在翼型和水翼上使用超疏水表面的潜力：一种数值方法
- 作者：S. Farshid Chini;M. Mahmoodi;M. Nosratollahi
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2017年第1期
- Airfoil;
- Superhydrophobic;
- Lift;
- Drag;
- Laminar separation bubble;
27.Identifying the minimum corrosion conditions for friction stir welded dissimilar joints of aluminium-magnesium alloys

机译：鉴定摩擦搅拌焊接铝 - 镁合金不同关节的最小腐蚀条件
- 作者：R. Kamal Jayaraj;S. Malarvizhi;V. Balasubramanian
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2017年第1期
- Friction stir welding;
- Dissimilar joint;
- Aluminium alloy;
- Magnesium alloy;
- Response surface methodology;
- Corrosion rate;
28.Experimental investigation on electrical discharge machining of ceramic composites (Si₃N₄-TiN) using RSM

机译：使用RSM的陶瓷复合材料放电加工的实验研究（Si _{3 N _{4 -tin）}}
- 作者：V.P. Srinivasan;P.K. Palani;L. Selvarajan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第2期
- electrical discharge machining;
- EDM;
- silicon nitride-titanium nitride;
- Si3N4-TiN;
- material removal rate;
- MRR;
- electrode wear rate;
- EWR;
- response surface methodology;
- RSM;
- design of experiments;
- DOE;
29.Application of numerical simulation during the development of ductile iron bearing seat

机译：数值模拟在延性铁轴承座开发过程中的应用
- 作者：Ping Li;Yanjie Zhao;Junquan Wei;Fengjun Li;Jitai Niu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第2期
- bearing seat;
- ductile iron;
- numerical simulation;
- solidification;
- casting defect;
30.Effect of friction stir welding parameters on mechanical and micro structural behaviour of AA7075-T651 and AA6061 dissimilar alloy joint

机译：摩擦搅拌焊接参数对AA7075-T651和AA6061异种合金接头机械和微结构行为的影响
- 作者：K.P. Yuvaraj;P. Ashoka Varthanan;C. Rajendran
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第2期
- friction stir welding;
- pin diameter;
- tool offset;
- tool tilt angle;
- response surface methodology;
- ultimate tensile strength;
31.Biological fabrication of silver nanomaterials and their applications in pharmaceutical fields

机译：银纳米材料的生物制造及其在制药领域的应用
- 作者：Balraj Baskaran;Arulmozhi Muthukumarasamy;Jayapriya Maruthai
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第2期
- antibacterial activity;
- anticancer activity;
- Streptomyces sp;
- silver nanomaterials;
32.Optimisation of cutting parameters on high-speed CNC milling for precision parts of non-ferrous castings using RSM

机译：使用RSM进行高速CNC铣削切割参数的优化
- 作者：N. Parameshwari;M. Ramesh;V.S. Thangarasu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第2期
- non ferrous metals;
- optimisation;
- surface roughness;
- high-speed machining;
33.Study on fatigue reliability evaluation method of mechanical system with damage structure under variable amplitude load

机译：可变幅度负荷下损伤结构机械系统疲劳可靠性评价方法研究
- 作者：Yuanyuan Ma;Liyang Xie;Xiaohang Xiong
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第2期
- variable amplitude loading;
- damage structure;
- probabilistic fatigue;
- structural reliability;
- system failure modelling;
34.Microstructures evolution and mechanical properties of 5052 aluminium alloy processed by constrained groove pressing

机译：约束槽压制5052铝合金的微观结构演化与机械性能
- 作者：Kai-huai Yang;Ze-chang Zou;Jian-min Zeng;Wen-zhe Chen
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- constrained groove pressing;
- CGP;
- 5052 Al;
- microstructures;
- grain refinement;
- mechanical properties;
35.Study the effect of roller hardness on the surface properties of burnished AISI 1211 steel

机译：研究辊硬度对抛光AISI 1211钢表面性质的影响
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第1期
- roller burnishing;
- cryogenic treatment;
- CNC lathe;
- hardness;
- roughness;
36.Predictive model for surface accuracy in ultra-high precision single point diamond machining of monocrystalline silicon using RSM and MD

机译：使用RSM和MD的超高精度单点金刚硅表面精度的预测模型
- 作者：Lukman N. Abdulkadir;Khaled Abou-El-Hossein;Abubakar Ishaq Jumare;Muhammad Mukhtar Liman;Odedeyi Peter Babatunde
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第2期
- surface roughness;
- response surface methodology;
- Box-Behnken;
- molecular dynamics;
- subsurface damage;
37.Evaluation and prediction of mechanical properties of HDPE grade P5300 using molecular dynamics

机译：利用分子动力学的HDPE级P5300力学性能评价与预测
- 作者：Vijay Kumar Dwivedi;Dipak Kumar
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第2期
- HDPE-P5300;
- single walled carbon nanotube;
- SWCN;
- SWCT;
- molecular simulation;
- mechanical properties;
38.Latest developments in virtual casting of lightweight metals

机译：轻质金属虚拟铸造的最新发展
- 作者：Qigui Wang;Peggy Jones;Yucong Wang;Dale Gerard
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第1期
- computational tools;
- integrated computational materials engineering;
- ICME;
- virtual casting;
- lightweight metals;
39.Mathematical model and optimisation for tensile strength of human hair reinforced polyester composites

机译：人毛增强涤纶复合材料的拉伸强度的数学模型及优化
- 作者：P. Divakara Rao;C. Udaya Kiran;K. Eshwara Prasad
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第1期
- composite;
- human hair fibre;
- fibre weight ratio;
- human hair reinforced composite;
- HHRC;
- response surface methodology;
- RSM;
- analysis of variance;
- ANOVA;
- historical data;
- optimisation;
- mathematical model;
- tensile strength;
40.Mechanical and wear surface characterisation of aluminium hybrid nanocomposite

机译：铝杂交纳米复合材料的机械和磨损表面特征
- 作者：I. Manivannan;S. Ranganathan;S. Gopalakannan;S. Suresh;D. Candane
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第4期
- Al6061;
- Nano SiC;
- graphite;
- ultrasonic assisted casting;
- wear;
- friction;
- surface roughness;
41.The austenitic peak stress model of low alloy steel at elevated temperature based on the valence electron theory

机译：基于价电子理论的升高温度低合金钢奥氏体峰应力模型
- 作者：Xu-dong Zhou;Xiang-ru Liu;Zheng-yang Chen
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- computational materials;
- valence electron theory;
- binding energy;
- total binding energy;
- austenite;
- peak stress;
42.Selection of process parameters of AISI 304 for laser processing of materials

机译：用于激光加工的AISI 304工艺参数的选择
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第1期
- laser material processing;
- numerical simulation;
- regression equation;
- solidus temperature;
- liquidus temperature;
43.Simulation investigation of temperature distribution in large aluminium panel during autoclave age forming process

机译：高压釜年龄成型过程中大型铝板温度分布的仿真研究
- 作者：Yongqian Xu;Lihua Zhan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- large aluminium panel;
- autoclave age forming;
- numerical simulation;
- temperature field;
- temperature difference;
44.Effect of cutting parameters on surface roughness in ultra-high precision turning of a contact lens polymer

机译：切削参数对隐形眼镜聚合物超高精度转动表面粗糙度的影响
- 作者：Muhammad Mukhtar Liman;Khaled Abou-El-Hossein;Lukman Niyi Abdulkadir;Peter Babatunde Odedeyi;Abubakar Ishaq Jumare
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第4期
- analysis of variance;
- ANOVA;
- cutting parameters;
- contact lenses;
- surface roughness;
45.Numerical analysis of stress-induced and concentration-dependent carbon diffusion in low-temperature surface carburisation of 316L stainless steel

机译：316L不锈钢低温表面碳碳碳中应力诱导和浓度依赖性碳扩散的数值分析
- 作者：Yawei Peng;Jianming Gong;Yong Jiang;Dongsong Rong;Minghui Fu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第1期
46.Plastic deformation and microstructure evolution of bearing ring blank during cold rolling process

机译：冷轧过程中轴承环形坯料的塑性变形和微观结构演化
- 作者：Song Deng;Lin Hua
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- bearing ring;
- plastic deformation;
- microstructure and texture evolution;
- cold rolling;
47.Comparison of RSM and ANN model in the prediction of the tensile shear failure load of spot welded AISI 304/316 L dissimilar sheets

机译：RSM和ANN模型在焊接焊接AISI的拉伸剪切破坏负荷预测中的比较304/316 L异种板
- 作者：Murugesan Vigneshkumar;Perumal Ashoka Varthanan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第2期
48.Effect of Ni content and brazing temperature on the self-joining of ZrB ₂-SiC

机译：Ni含量和钎焊温度对Zrb _{2 -sic自连接的影响}
- 作者：Jiayin Liu;Jie Zhang;Chunfeng Liu;Tianpeng Wang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第1期
- ZrB2-SiC;
- Pd-Co-Ni;
- brazing temperature;
- microstructure;
- mechanical properties;
49.The simulation for ultrasonic testing based on frequency-phase coded excitation

机译：基于频相译码激励的超声波检测仿真
- 作者：Xinyu Zhao;Jiaying Zhang;Sen Cong;Tie Gang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第1期
- simulation;
- ultrasonic testing;
- coded excitation;
- pulse compression;
- K-wave;
50.Thermo-mechanical analysis in SAE-AISI 1524 carbon steel gas tungsten arc welds

机译：SAE-AISI 1524碳钢气体钨弧焊热学机械分析
- 作者：E.A. Bonifaz
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- finite element method;
- thermal cycles;
- residual stresses;
- heating and cooling curves;
- weld profiles;
51.Thermo-mechanical evaluation of plasma sprayed YSZ-based multi-layered thermal barrier coatings

机译：等离子喷涂YSZ基多层热阻挡涂层的热机械评价
- 作者：Debasish Das;Rajeev Verma;Vipul Kumar Pathak
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第4期
- thermal barrier coatings;
- TBCs;
- diesel engine;
- thermal cycling;
- lattice strain;
52.Erosive wear analysis of propeller blade coated with tungsten carbide cobalt by high-velocity oxy-fuel spray method

机译：高速氧燃料喷涂法涂有碳化钨钴碳化钨螺旋桨叶片的腐蚀磨损分析
- 作者：B.A. Mudasar Pasha;Mohammed Kaleemulla;Avinash Roshan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第2期
- erosion;
- SEM;
- FEM;
- aluminium;
- propeller blade;
53.Effect of weld parameters on joint strength of 904L grade steel using resistance spot welding

机译：焊接参数对电阻点焊904L级钢联合强度的影响
- 作者：Vivek D. Kalyankar;Nitin Chouhan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第4期
- 904L stainless steel;
- resistance spot welding;
- RSW;
- tensile shear strength;
- TSS;
- weld time;
- electrode pressure;
- weld current;
- squeeze time;
54.Modelling and optimisation of adhesive bonded joint strength of composites for aerospace applications

机译：用于航空航天应用复合材料粘合剂接头强度的建模与优化
- 作者：R. Hanumantharaya;Irappa Sogalad;S. Basavarajappa;G.C. Manjunath Patel
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2019年第4期
- composite bonded joint;
- response surface methodology;
- central composite design;
- CCD;
- genetic algorithm;
55.Numerical simulation of residual stress in low temperature colossal carburised layer on austenitic stainless steel

机译：奥氏体不锈钢低温较碳碳水层残余应力的数值模拟
- 作者：Dongsong Rong;Yong Jiang;Jianming Gong;Yawei Peng
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2018年第4期
- residual stress;
- numerical model;
- austenitic stainless steel;
- carbon diffusity;
- low temperature colossal carburisation;
- LTCC;
56.Experimental and numerical study of laser surface alloying of Al _xCu _0.5FeNiTi high entropy alloy

机译：Al _{X / Sub> Cu _{0.5 Feniti高熵合金激光表面合金的实验和数值研究}}
- 作者：Anas Ahmad Siddiqui;Avanish Kumar Dubey
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第3期
- laser surface alloying;
- LSA;
- finite element modelling;
- high entropy alloy;
- HEA;
- numerical modelling;
57.Microstructure and mechanical properties of nano-WC decorated AlSi10Mg composite produced by selective laser melting: effect of heat treatment

机译：选择性激光熔化产生的纳米WC装饰Alsi10mg复合材料的组织和力学性能：热处理效果
- 作者：Han Ye;Fangbin Le;Jianqiang Zhang;Yong Liu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第4期
- additive manufacturing;
- AlSi10Mg alloy;
- WC;
- mechanism analysis;
58.Power Voronoi assisted modelling and simulation of austenite formation during continuous heating in C35 steel

机译：C35钢连续加热过程中奥氏体形成辅助建模与仿真
- 作者：S. Sanchu;N. Biju;V.N. Narayanan Namboothiri;K.K. Minu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第4期
- austenite formation;
- power Voronoi diagram;
- phase transformation kinetics modelling;
59.One-pot synthesis method of copper nanoparticles in air

机译：空气中铜纳米粒子的一锅合成方法
- 作者：Yingqiong Yong;Yanfei Liu;Jun Wang;Shengju Song;Hongjiang Zhang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第4期
- nanoparticles;
- copper;
- one-step process;
60.Identifying the minimum corrosion conditions for friction stir welded dissimilar joints of aluminium-magnesium alloys

机译：鉴定摩擦搅拌焊接铝 - 镁合金不同关节的最小腐蚀条件
- 作者：R. Kamal Jayaraj;S. Malarvizhi;V. Balasubramanian
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2017年第1期
- Friction stir welding;
- Dissimilar joint;
- Aluminium alloy;
- Magnesium alloy;
- Response surface methodology;
- Corrosion rate;
61.The effect of combined electrical and thermal cyclic loading on the mechanical behaviour of HfO ₂ nanofilm. A molecular dynamics study

机译：电气和热环荷载对HFO _{2 纳米膜力学行为的影响。分子动力学研究}
- 作者：Md Riaz Kayser;Sheikh Fahad Ferdous;Ashfaq Adnan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第3期
- memristor;
- hafnium dioxide;
- HfO2;
- molecular dynamics;
- electric field;
- mechanical properties;
- neuromorphic computation;
62.First principle investigation of the structural, electronic and optical properties of methylammonium lead iodide: implications for photovoltaic applications

机译：甲基碘化碘化物结构，电子和光学性质的第一原理研究：光伏应用的影响
- 作者：Arti Meena;Sarita Kumari;Amanpal Singh;Ajay Singh Verma
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第1期
- first principle study;
- perovskite;
- structural;
- electronic and optical properties;
63.Energetics and stability of hydrogen sulphide adsorption on defective carbon nanotube

机译：硫化氢吸附对缺陷碳纳米管的能量和稳定性
- 作者：Riri Jonuarti;Meqorry Yusfi;Suprijadi
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第1期
- defective CNT;
- formation energy;
- dissociation energy;
- adsorption energy;
- H2S sensor;
- density functional theory;
64.Effects of hot deformation and heat treatment on grain refinement for as-cast and spray formed SA508-3 steel

机译：热变形及热处理对铸造和喷雾形成的晶粒细化的影响SA508-3钢
- 作者：Da-shan Sui;Hai-ming Zhang;Juan Liu;Ming-xiang Liu;Jian-jun Wu;Zhen-shan Cui
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第3期
- SA508-3 steel;
- spray forming;
- hot deformation;
- heat treatment;
- grain refinement;
65.Design of bonding process parameters for experimentation and ANN-GA model development to maximise diffusion bond strength

机译：实验和Ann-GA模型开发结合工艺参数设计，最大限度地扩散粘合强度
- 作者：A. Sagai Francis Britto;R. Edwin Raja;M. Carolin Mabel
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第3期
- aluminium alloys;
- diffusion bonding;
- soft computing techniques;
- response surface methodology;
- RSM;
66.Design optimisation of circular piezoelectric bimorph actuators using finite element analysis

机译：使用有限元分析设计圆形压电双百合形致动器的优化
- 作者：C. Rakeshkumar;R. Naveen;M. Saleem;R. Raga
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第1期
- piezo electric material;
- FEA;
- bimorph actuator;
- deflection;
- ANSYS;
67.Numerical simulation and experimental study on non-uniform strain during hot compression of aluminium alloy

机译：铝合金热压缩期间非均匀应变的数值模拟与实验研究
- 作者：Haigen Jian;Yedong Wang;Xiaomei Yang;Chengji Mi;Xinlei Lei;Wei Zhang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第1期
68.Investigation of effect of residual stress and interlayer in PVD multilayer TiAlN coating by finite element analysis

机译：用有限元分析对PVD多层TiAln涂层残余应力和中间层效果的研究
- 作者：Sudhansu Sekhar Patro;Sudesna Roy
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第3期
- physical vapour deposition;
- PVD;
- TiAlN;
- FEM;
- residual stress;
69.Parametric optimisation of high speed turning operation of hybrid aluminium composites using Taguchi-based grey relational analysis

机译：基于Taguchi的灰色关系分析，杂交铝合金复合材料高速转动操作的参数优化
- 作者：A. Thirumoorthy;T.V. Arjunan;M. Arulraj;R. Kumaravelan;T.C.R. Dinesh
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第4期
- silicon nitride;
- high speed turning;
- grey relational analysis;
- hybrid composite;
70.Effect of heat treatment on the microstructures and hardness of selective laser melted Rene88DT superalloy

机译：热处理对选择性激光熔化的微观结构和硬度的影响Rene88DT超合金
- 作者：Jian Liu;Yu Yan;Qin Peng;Yu Lei
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2020年第4期
- selective laser melting;
- Rene88DT superalloy;
- heat treatment;
- microstructures;
- hardness;
71.Prediction on the operation performance of axial piston pump at low suction pressure

机译：轴向活塞泵在低吸气压力下的操作性能预测
- 作者：Miaomiao Wang;Zhimin Guo;Junjie Zhou;Guangming Sun;Wenpan Gao
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第1期
- axial piston pump;
- low suction pressure;
- operation performance;
- maximum operating speed;
- compressible liquid;
- cavitation;
72.Research progress of lightweight metallic materials and their processing technologies for modern transportation

机译：Research progress of lightweight metallic materials and their processing technologies for modern transportation
- 作者：Fan Zhao;Hongxiang Li;Zhengzhi ZhaoXinhua Liu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第2期
73.Modelling of grain growth and its effect on mechanical properties of stainless steel components

机译：Modelling of grain growth and its effect on mechanical properties of stainless steel components
- 作者：Siva Shankar Alla;Hemantha Kumar Yeddu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第2期
- phase-field model;
- grain growth;
- finite element simulations;
- stainless steels;
- Sellars model;
- Beck's model;
- inlet nozzle;
- nuclear reactor;
- nitrogen concentration;
- annealing;
74.Characterisation of Bi doped YBaCo sub2/subO sub5+δ/sub layered perovskite oxide as a cathode for Intermediate-temperature solid oxide fuel cell

机译：Characterisation of Bi doped YBaCo sub2/subO sub5+δ/sub layered perovskite oxide as a cathode for Intermediate-temperature solid oxide fuel cell
- 作者：He Wang;Jingsheng Xu;Zhaoyuan SongXiaogang SuDapeng WuLeilei Zhang
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第2期
- IT-SOFC;
- cobalt-based layered perovskite;
- thermal expansion;
- electrical conductivity;
- polarisation resistance;
75.Study of wear properties of Al7075-SiC-Gr composites using Taguchi and ANOVA methods

机译：Study of wear properties of Al7075-SiC-Gr composites using Taguchi and ANOVA methods
- 作者：T. S. Manjunath;Seenappa;M. V. Praveen KumarM. Rudresh
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2022年第2期
- MMCs;
- Metal matrix composites;
- Al7075-SiC-Gr;
- Powder metallurgy;
- Wear properties;
- Taguchi;
- ANOVA;
- Analysis of variance;
76.Improving the tensile and fatigue crack growth properties of SLM Ti-6Al-4V alloy by heat treatment and ultrasonic surface rolling process

机译：Improving the tensile and fatigue crack growth properties of SLM Ti-6Al-4V alloy by heat treatment and ultrasonic surface rolling process
- 作者：Senzhong Liu;Han Ye
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第4期
- heat treatment;
- ultrasonic surface rolling process;
- fatigue crack growth properties;
- tensile behaviour;
77.The effect of ultrasonic shot peening on the fatigue life of alloy materials: a review

机译：The effect of ultrasonic shot peening on the fatigue life of alloy materials: a review
- 作者：Yun Chen;Sen Deng;Chao ZhuKaixiong HuFei Yin
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第4期
- USP;
- ultrasonic shot peening;
- nano grains;
- stress concentration factor;
- USP processing parameters;
- finite element simulation;
78.Parametric study on influence of ply drop-offs on buckling behaviour in composites

机译：Parametric study on influence of ply drop-offs on buckling behaviour in composites
- 作者：Vijay Mohan Shetty;M. Madhavi;P. Ramesh Babu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2022年第2期
- Composites;
- Ply drop-offs;
- E glass epoxy;
- Staggering length;
- Ply orientation;
- Buckling;
- Critical load;
- Ansys;
79.Friction and wear performance of Si 3 N 4 reinforced AZ91D based composite synthesised by powder metallurgy technique

机译：Friction and wear performance of Si 3 N 4 reinforced AZ91D based composite synthesised by powder metallurgy technique
- 作者：Ankita Balikai;Adarsha Hiriyannaiah;R. Keshavamurthy
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第4期
- AZ91D magnesium-alloy;
- Si3N4;
- silicon nitride;
- metal-matrix composites;
- powder metallurgy;
- wear;
- co-efficient of friction;
80.Research progress on hot stamping theory and technology of aluminium alloy sheets

机译：Research progress on hot stamping theory and technology of aluminium alloy sheets
- 作者：Yanli Song;Jue Lu;Lin HuaChuanchuan HaoXiang Dong
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第4期
- lightweight;
- aluminium alloy;
- hot stamping;
- constitutive equations;
- process;
- die;
81.Performance enhancement of square reinforced concrete column carrying axial compression by (1) C-FRP wrapping, and (2) steel angle system under air-blast loading

机译：Performance enhancement of square reinforced concrete column carrying axial compression by (1) C-FRP wrapping, and (2) steel angle system under air-blast loading
- 作者：Mohd Shariq;Mehtab Alam;S. M. AnasNazrul IslamAsif Hussain
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2022年第2期
- Blast loading;
- Computational simulations;
- CFRP;
- Damage;
- Damage dissipation energy;
- RC columns;
- Steel jacketing;
- Seismic reinforcement;
82.Prioritisation of self-curing self-compacting mortars with hydrophilic chemicals using MCDM techniques

机译：Prioritisation of self-curing self-compacting mortars with hydrophilic chemicals using MCDM techniques
- 作者：Degloorkar Nikhil Kumar;Pancharathi Rathish Kumar;S. A. ReddiSri Rama Chand Madduru
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2022年第1期
83.Topological data analysis and comparison of physical parameters of different forms of graphene

机译：Topological data analysis and comparison of physical parameters of different forms of graphene
- 作者：J. Karthik;Navya Jose;Mahesh KumarRudrappa Somashekar
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2022年第2期
- Monte-Carlo analysis;
- Molecular modelling;
- Crystal structure;
- Modulus;
- Graphene;
84.Parametric effect on machining characteristics of laser machined Al7075-TiB 2 in-situ composite

机译：Parametric effect on machining characteristics of laser machined Al7075-TiB 2 in-situ composite
- 作者：R. Keshavamurthy;S. Manjoth;G.S. Pradeep KumarJ.T. Kavya
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第4期
- in-situ composite;
- laser machining;
- Al7075 alloy;
- SOD;
- stand-off distance;
- cutting speed and gas pressure;
85.Optimisation of EDM process parameters: by butterfly optimisation algorithm and genetic algorithm

机译：Optimisation of EDM process parameters: by butterfly optimisation algorithm and genetic algorithm
- 作者：Shubham Jain;Vishal Parashar
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2022年第1期
86.Diffusional model of expanded austenite layer growth on AISI 316L stainless steel during low-temperature hybrid thermochemical treatment

机译：Diffusional model of expanded austenite layer growth on AISI 316L stainless steel during low-temperature hybrid thermochemical treatment
- 作者：Esa Haruman;Annissa Fanya;Mohd Shahriman Adenan
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第2期
87.An accurate detection method for randomly distributed welding slags using an improved Yolo v3 network

机译：An accurate detection method for randomly distributed welding slags using an improved Yolo v3 network
- 作者：Qiuping Tu;Hongdi Liu;Chao QuLinli TianDahu Zhu
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第4期
- defect detection;
- welding slags;
- Yolo v3;
- Darknet53;
- recall rate;
88.Microstructure and mechanical properties of bulk annealed AlCoCrFeNi sub2.1/sub eutectic high-entropy alloy

机译：Microstructure and mechanical properties of bulk annealed AlCoCrFeNi sub2.1/sub eutectic high-entropy alloy
- 作者：Wenna Jiao;Junyang He;Tianxin LiYiping LuTingju Li
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第2期
- eutectic high entropy alloy;
- AlCoCrFeNi21;
- stability;
- microstructure;
- hardness;
- mechanical properties;
- precipitates;
- Lamellar spacing;
- as-cast;
- as-annealed;
89.First-principles investigation of hexagonal boron-carbon-nitride (h-BCN) nanosheet (2D) as gas sensor towards toxic gases (CO, H 2 S, PH 3 , SO 2 , and HCN)

机译：First-principles investigation of hexagonal boron-carbon-nitride (h-BCN) nanosheet (2D) as gas sensor towards toxic gases (CO, H 2 S, PH 3 , SO 2 , and HCN)
- 作者：Reshma Khatun;Mohammad Tanvir Ahmed;Shariful IslamMd. Kamal HossainMd. Abul HossainFarid Ahmed
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2021年第4期
- sensor;
- nanosheet;
- DFT;
- density functional theory;
- BCN;
- boron-carbon-nitride;
- toxic gas;
90.Design of gating system for propeller casting through melt flow simulation

机译：Design of gating system for propeller casting through melt flow simulation
- 作者：Amir Hosein Riazi;Seyed Mohammad Ali Boutorabi;Mohammadreza AboutalebiMohsen Ostad Shabani
- 期刊名称：《International Journal of Computational Materials Science and Surface Engineering》 | 2022年第1期
- Simulation;
- Extended runner;
- Casting;
- Propeller;
- Filter;
- Fan gate;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号