首页>外文期刊>材料科学>International journal of materials engineering and technology

International journal of materials engineering and technology

中文名称：国际材料工程与技术杂志

ISSN：0975-0444
出版周期：Quarterly

发文量：124

期刊论文

热门论文

年度选择

2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
2018
- 第1期
- 第2期
2017
- 第2期
- 第3期
2016
- 第1期
- 第3期
- 第4期
2015
- 第1期
- 第2期
2014
- 第1期
- 第2期
2013
- 第1期
- 第2期
2012
- 第1期
- 第2期
2011
- 第1期
- 第2期

更多>>

全选（0）

1.MICROSTRUCTURAL CHARACTERIZATION AND NUMERICAL MODELING OF HEAT AND FLUID FLOW DURING SOLIDIFICATION OF ALUMINIUM ALLOY

机译：铝合金凝固过程中热流和流动的微观结构表征及数值模拟
- 作者：C. P. Egole;H. E. Mgbemere;G. I. Lawal;G. C. Nzebuka
- 期刊名称：《International journal of materials engineering and technology》 | 2018年第1期
- numerical methods;
- characterization;
- aluminum alloys;
- microstructure;
- continuous casting;
- direct Chill casting;
- solidification;
- modeling and simulation;
2.CASTING MODULUS OPTIMIZATION FOR HARDNESS AND MICROSTRUCTURE USING KELUD MOUNTAIN SAND

机译：克鲁德山砂对硬度和微观结构的铸造模量优化
- 作者：Mochamad Arif lrfai;Dzulkiflih;Diah Wulandari;Wahyono Suprapto
- 期刊名称：《International journal of materials engineering and technology》 | 2018年第1期
- casting modulus;
- pouring temperature;
- microstructure and hardness;
3.MICROSTRUCTURE OF CNT/STEEL NANOCOMPOSITES AND THEIR CHARACTERISTICS

机译：碳纳米管/钢纳米复合材料的微观结构及其特性
- 作者：Toshiaki Natsuki;Jun Natsuki;Kensei Matsubara
- 期刊名称：《International journal of materials engineering and technology》 | 2018年第1期
- nanocomposites;
- carbon nanotubes;
- mechanical properties;
4.LOW-TEMPERATURE SOLUTION PROCESSED ZnO NANOSTRUCTURES

机译：低温溶液处理的ZnO纳米结构
- 作者：Nobuaki Kitazawa;Masami Aono;Yoshihisa Watanabe
- 期刊名称：《International journal of materials engineering and technology》 | 2017年第3期
- ZnO nanostructures;
- ZnO nanowire arrays;
- hydrothermal method;
- growth process;
5.PROPER ARRANGEMENT OF REINFORCING RIBS FOR ELIMINATION OF THERMAL DEFORMATIONS IN METALLURGICAL PRODUCTS

机译：适当布置钢筋以消除冶金产品中的热变形
- 作者：M. E. Matarneh;F. M. Al Quran;V. V. Chigarev;A. V. Loza
- 期刊名称：《International journal of materials engineering and technology》 | 2017年第3期
- reinforcing ribs;
- thermal deformations;
- welding;
- metallurgical equipment;
- high temperatures;
- increase of service life;
6.Picralima nitida LEAVES EXTRACT FOR INHIBITION OF MILD STEEL CORROSION IN 1.0M HYDROCHLORIC ACID SOLUTION

机译：Picralima nitida提取物可抑制1.0M盐酸溶液中的轻度钢腐蚀
- 作者：O. D. Onukwuli;J. N. O. Ezeugo;M. Omotioma
- 期刊名称：《International journal of materials engineering and technology》 | 2017年第3期
- mild steel;
- corrosion inhibitor;
- acidic medium;
- Picralima nitida;
- potentiodynamic;
7.INVESTIGATION ON LUMINESCENCE BEHAVIOR OF THE VANADATE GROUP IN PURE YVO_4 SINGLE CRYSTAL

机译：纯YVO_4单晶中钒酸盐基团的发光行为研究。
- 作者：Shuai Wang;Yongfeng Ruan;Youfa Wang;Pengfei Wang;Shouchao Zhang
- 期刊名称：《International journal of materials engineering and technology》 | 2017年第2期
- XPS;
- charge transfer state;
- luminescence;
- CIE chromaticity coordinate;
- color temperature;
8.VARIATION OF GEOTECHNICAL PARAMETERS IN THE MIXTURE OF CRUSHED AND ROUNDED GRAVELS IN THE NORTH WEST REGION OF CAMEROON BY THE WEIGHT MASS METHOD

机译：喀麦隆西北地区碎石和圆砾石混合岩土参数的权重法变化
- 作者：Yamb Emmanuel;Bahel Benjamin;Bock Hyeng Christian Alain
- 期刊名称：《International journal of materials engineering and technology》 | 2017年第2期
- void ratio;
- permeability;
- rounded gravel;
- crushed gravel;
- weight mass;
9.SYNTHESIS AND CHARACTERIZATION OF HEMATITE OBTAINED ON THERMAL DECOMPOSITION OF ACETYL FERROCENE

机译：乙酰二茂铁热分解获得的赤铁矿的合成与表征
- 作者：B. Das;J. Kusz;V. Raghavendra Reddy;M. Zubko;A. Bhattacharjee
- 期刊名称：《International journal of materials engineering and technology》 | 2017年第2期
- acetyl ferrocene;
- thermal decomposition;
- characterization;
- hematite;
10.INVESTIGATION OF Cu-MA SPINEL COMPOSITES MADE FROM THEIR NANO-STRUCTURED POWDERS

机译：用纳米结构粉末制成的Cu-MA尖晶石复合材料的研究
- 作者：Emad M. M. Ewais;Mahmoud A. A. Hagras;Omayma A. M. Elkady;Adel A. Mohamed
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第1期
- PM;
- MA spinel;
- electroless copper deposition;
- sintering;
- mechanical properties;
- FESEM;
11.PROPOSING DESIGN GUIDELINE FOR HYDROGEN PERMEATION MEMBRANE ALLOY BASED ON Va-GROUP METALS (V, Nb AND Ta) TAKING INTO ACCOUNT ATOMIC INTERACTION ENERGY PARAMETER EVALUATED BY STATISTICAL THERMODYNAMICS

机译：提出基于Va-Group金属（V，Nb和Ta）的氢渗透膜合金的设计指南，并考虑了统计热力学计算的原子相互作用能参数
- 作者：Nobumitsu Shohoji
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第1期
- H solubility;
- H permeation alloy membrane;
- Va-group metals (V, Nb, Ta);
- statistical thermodynamics;
12.NANOLEAD-FREE SOLDER ALLOYS FOR ELECTRONIC PACKAGING AND INTEGRATION

机译：用于电子包装和集成的无纳米焊料合金
- 作者：A. E. Hammad;Sara El-Molla
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第1期
- nanolead-free solders;
- alloy;
- melting temperature;
- wettability;
- mechanical properties;
- microstructure;
13.COMPATIBILITY OF BIDZAR LIMESTONE AND FIGUIL CLAY (NORTHERN CAMEROON) FOR THE PRODUCTION OF PORTLAND CLINKER

机译：BIDZAR石灰石和FIGURAL粘土（北喀麦隆）在波特兰熟料生产中的相容性
- 作者：Emmanue Yamb;Blaise Ngwem Bayiha;Ndigui Billong;Serykh Inna Robertovna
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第1期
- Cameroon;
- Bidzar limestone;
- Figuil clay;
- Portland clinker;
- compatibility;
14.PHOTODISCOLORATION PROCESSES OF DYES REACTIVE USING RADIATION AND Fe/TiO_2

机译：染料和Fe / TiO_2在染料反应中的光脱色过程
- 作者：L. M. S. Colpini;G. G. Lenzi;R. C. Thorn de Souza;M. B. Urio;D. M. Kochepka;M. A. R. Santos;E. C. Vasques;H. J. Alves
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第4期
- impregnation;
- photocatalysis;
- discoloration;
- characterization;
- support vector regression.;
15.DETERMINATION OF PROPERTIES AND QUALITY OF GLASS FIBER REINFORCED POLYMER COMPOSITE REINFORCING BARS

机译：玻璃纤维增强聚合物复合筋的性能和质量的测定
- 作者：Paulina Arczewska;Maria Anna Polak;Alexander Penlidis
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第4期
- GFRP (glass fiber reinforced polymer);
- reinforcement;
- composite;
- quality control;
- tensile testing;
- flexural testing;
- shear testing;
- compression testing;
- cure ratio;
- results;
- analysis;
- discussion.;
16.DIFFUSION PROCESS IN REVERBERATORY FURNACE TO CONTROL THE QUALITY OF RECYCLED ALUMINUM

机译：还原炉中的扩散过程控制再生铝的质量
- 作者：Wahyono Suprapto
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第4期
- recycling;
- yield casting;
- ingot;
- inclusion;
- reverberatory.;
17.ASPHALT CRACKING PREDICTION: A COMPARISON OF ECONOMETRIC AND COMPUTATIONAL INTELLIGENCE MODELS

机译：沥青裂缝预测：经济模型和计算智能模型的比较
- 作者：Aristides G. Karlaftis;Atef Badr
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第3期
- Bayesian model;
- stochastic duration;
- neural networks;
- fatigue cracking;
- pavements;
18.INFLUENCE OF BURR HEIGHT AND SURFACE ROUGHNESS IN DRILLING LOW ALLOY STEELS FOR DIFFERENT DRILL-POINT ANGLES USING DESIGN OF EXPERIMENTS AND ARTIFICIAL NEURAL NETWORK

机译：实验设计和人工神经网络对钻削低合金钢中毛刺高度和表面粗糙度的影响
- 作者：Jaimon Dennis Quadros;N. L. Vaishak;Suhas
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第3期
- burr;
- surface roughness;
- drilling;
- low carbon;
- artificial neural networks (ANNs);
19.THE EFFECTS OF THE NiO AND SiO_2 THIN FILMS ON THE POROUS SILICON OPTICAL AND CHEMICAL STABILITY

机译：NiO和SiO_2薄膜对多孔硅光学和化学稳定性的影响。
- 作者：S. Thamri;M. Ouadhour;M. Jlassi;M. Hajji;H. Ezzaouia
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第3期
- porous silicon;
- silicon dioxide;
- nickel oxide;
- antireflection coating;
20.EXPERIMENTAL INVESTIGATION OF THE HOLE EXPANSION CAPABILITY OF A MARTENSITIC AHSS STEEL WITH TWO PUNCH GEOMETRIES AND A VARIETY OF HOLE DIAMETERS

机译：马氏体HSS钢的两种冲孔几何形状和孔直径变化对孔扩展能力的实验研究
- 作者：Leandro Antonio Thesing;Uilian Boff;Lirio Schaeffer
- 期刊名称：《International journal of materials engineering and technology》 | 2016年第3期
- hole expansion;
- stretch flangeability;
- AHSS forming;
- forming limits;
21.REVIEW ON UREMIA LOBATA FIBRE REINFORCED POLYMER COMPOSITES

机译：UREMIA LOBATA纤维增强聚合物复合材料的评论
- 作者：E. N. Ikezue;O. D. Onukwuli
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- uremia lobata fibre;
- polymer composites;
- structure;
- properties;
22.SWCNTs/POLY(ETHYLENE TEREPHTHALATE GLYCOL-MODIFIED) (PETG) NANOCOMPOSITES: PREPARATION AND CHARACTERIZATION OF THIN CONDUCTIVE FILMS

机译：SWCNTs /聚对苯二甲酸乙二醇酯（PETG）纳米复合材料：薄导电膜的制备和表征
- 作者：S. Paszkiewicz;I. Pawelec;A. Szymczyk;Z. Roslaniec
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- PETG;
- thin conductive films;
- dielectric spectroscopy;
- in situ polymerization;
23.A NUMERICAL METHOD FOR THE INVESTIGATION OF DOPING AND CODOPING EFFECT ON MASS TRANSPORT BY SURFACE DIFFUSION IN A GRANULAR PACKING

机译：颗粒状包装表面扩散研究的掺杂和共掺杂效应的数值方法
- 作者：H. Tossoukpe;J. Bruchon;F. Valdivieso;S. Drapier
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- sintering;
- doping;
- magnesia-doped alumina;
- finite element analysis;
- level-set technique;
24.EFFECTS OF BENDING PROCESS PARAMETERS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HAZ OF X80 HOT INDUCTION BENDS

机译：弯曲工艺参数对X80热感应焊缝热影响区组织和力学性能的影响
- 作者：Xu Wang;Bo Liao;Gui-Ying Qiao;Yan-Hong Fu;Fu-Ren Xiao
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- hot induction bends;
- X80 steel;
- HAZ;
- heat treatment;
- microstructure;
25.A STUDY OF Ni-Cr-Si-BASED THIN FILM RESISTORS PREPARED BY DC MAGNETRON SPUTTERING

机译：直流磁控溅射制备Ni-Cr-Si基薄膜电阻的研究
- 作者：Dong-Jen Feng;Ying-Chieh Lee;Yi-Ben Chen
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- Ni-Cr-Si-based thin film resistors;
- resistivity;
- DC magnetron sputtering;
- annealing;
26.EFFECT OF WELDING PROCESSES AND POSTWELD HEAT TREATMENT ON THE MECHANICAL PROPERTIES OF Ti-6Al-4V CASTINGS

机译：焊接工艺和焊后热处理对Ti-6Al-4V铸件力学性能的影响
- 作者：Reham Reda;Abdel-Hamid Hussein;Adel Nofal;M. Sobih;El-Sayed M. El-Banna
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- Ti-6Al-4V;
- GTAW;
- EBW;
- postweld heat treatment;
- microstructure;
- mechanical properties;
27.ANALYSIS OF BUCKLING BEHAVIOR OF ELLIPTICAL PLATE WITH NON-CONCENTRIC ELLIPTIC HOLE

机译：非中心椭圆孔的椭圆板屈曲行为分析
- 作者：Salahaddin Sanusei;Emad Mazhari;Alireza Shahidi
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- buckling;
- elliptical plate;
- non-concentric hole;
- shape function;
- Rayleigh-Ritz method;
28.EVALUATION OF STABILITY OF TARGET HOMEMADE BY EFFECT OF TEMPERATURE, POWER AND FLOW IN THE DEPOSITION OF ZIRCONIA STABILIZED 8% Y_2O_3 THIN FILMS WITH RF SPUTTERING

机译：射频溅射法制备的氧化锆稳定的8％Y_2O_3薄膜的温度，功率和流量对目标自制的稳定性的评价
- 作者：D. R. Ortiz Palacios;A. Reyes Rojas;J. Reyes Holguin;J. A. Duarte Moller;H. E. Esparza-Ponce
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- zirconia;
- electrolyte;
- RF;
- sputtering;
- AFM;
- XRD;
29.SYNTHESIS AND STRUCTURAL CHARACTERIZATION OF CdTe/CdS/ITO THIN FILMS GROWN BY CLOSE SPACE SUBLIMATION WITH THERMAL TREATMENT OF CdCl_2

机译：CdCl_2热处理致密CbTe / CdS / ITO薄膜的合成及其结构表征。
- 作者：A. R. Rivera-Gomez;H. E. Esparza-Ponce;E. Orrantia-Borunda;A. Duarte-Moller
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- CdTe;
- semiconductor;
- close space sublimation;
- CSSSR;
30.ANALYSIS OF MECHANICAL AND CHEMICAL PROPERTIES OF STEEL GRADE NBR B275 7008 COMPARED TO ASTM A792 GALVALUME® AZM150 BEFORE FORMING MECHANICS

机译：成形前对与ASTM A792GALVALUME®AZM150相比的NBR B275 7008级钢的力学和化学性能进行分析
- 作者：Vilson Gruber;Renato Americo;Celia de Fraga Malfatti;Pedro Augusto Di Francia Rosso
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- Galvalume®;
- steel NBR 7008;
31.ONE-STEP SYNTHESIS OF SILVER NANOPARTICLES USING LOW MOLECULAR WEIGHT COMPOUNDS AT ROOM TEMPERATURE

机译：在室温下使用低分子量化合物一步合成银纳米粒子
- 作者：Toshiaki Natsuki;Jun Natsuki
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- silver nanoparticles;
- synthesis;
- nanotechnology;
32.FIRST PRINCIPLES CALCULATIONS OF ELECTRONIC AND OPTICAL PROPERTIES OF CuInSe_2 ABSORBER LAYER

机译：CuInSe_2吸收层的电子和光学性质的第一性原理计算
- 作者：S. Hamrouni;A. Almuhayya;K. Ben Saad
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- chalcopyrite semiconductors;
- CuInSe_2;
- electronic structure;
- optical properties;
- first-principle calculations;
33.ELECTRONIC STRUCTURE AND FERMI SURFACES OF HEAVY FERMION LuRh_2Si_2

机译：重金属费卢离子LuRh_2Si_2的电子结构和费米表面
- 作者：T.Jeong
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- electronic structure;
- Fermi surface;
- LuRh_2Si_2;
34.EVALUATION BY GENETIC ALGORITHM OF THE DAMAGE TO THE FIBER MATRIX INTERFACE OF COMPOSITE MATERIALS, LOCATED BY THE NONLINEAR ACOUSTIC TECHNICAL

机译：遗传算法对非线性声学技术定位的复合材料纤维基质界面损伤的评估
- 作者：A. Mokaddem;B. Doumi;N. Beldjoudi;M. Alami;A. Boutaous
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- fiber;
- matrix;
- composite;
- nonlinear acoustic technical;
- damage;
- genetic algorithm;
35.AN EXPLORATORY STUDY ON ALKALI-ACTIVATED SLAG PASTE BLENDED WITH MICRO METAKAOLIN SUBJECTED TO THERMAL LOADS

机译：热负荷下微细金属高岭土掺合碱活化渣浆的探索性研究
- 作者：Alaa M. Rashad;Khaled. M. Shokry
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- activated slag;
- micro metakaolin;
- residual strength;
- elevated temperature;
36.TEMPERATURE AND pH-DEPENDENT MOLECULAR DYNAMICS OF THERMOPLASMA ACIDOPHILUM TETRAETHER LIPID MEMBRANE IN A COMPUTER-SIMULATED MODEL

机译：计算机模拟模型中热等离子嗜酸四醚脂膜的温度和pH依赖性分子动力学
- 作者：Zessinda Luthfa;Hans-Joachim Freisleben;Rosari Saleh
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- tetraether lipid membrane;
- main polar lipid;
- pentacyclization;
- implicit solvent;
- molecular dynamics simulations;
- cell lysis;
- growth temperature;
37.THE USE OF EXPERIMENTAL DESIGN IN THE EVALUATION OF MECHANICAL PROPERTIES OF PP/VERMICULITE COMPOSITES

机译：实验设计在PP / VER石复合材料力学性能评估中的应用
- 作者：Elvis A. F. Araujo;Elen B. A. V. Pacheco;Leila L. Y. Visconte;Ana L. N. da Silva;Lys Sirelli
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- polypropylene;
- vermiculite;
- composite;
- experimental design;
- processing;
38.ELECTRICAL CONDUCTION AND DIELECTRIC PROPERTIES OF THE LACUNAR Ca_2MnO_(4-δ) SYSTEM

机译：Lacunar Ca_2MnO_（4-δ）体系的电导率和介电性能
- 作者：N. Chihaoui;M. Bejar;E. Dhahri;M. A. Valente;L. C. Costa;M. P. F. Graca
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- ac electrical conductivity;
- maximum barrier height;
- minimum hopping distance;
- CBH model;
39.INFLUENCE OF DRILLING PARAMETERS ON BURR FORMATION AND SIZE FOR LOW CARBON STEEL AND STAINLESS STEEL

机译：钻削参数对低碳钢和不锈钢毛刺形成和尺寸的影响
- 作者：D. K. Suker;A. M. Mirza
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- drilling parameters;
- burr formation;
- low carbon steel;
- stainless steel;
40.DYNAMIC STABILITY AND FREE VIBRATION OF MULTI-SPAN FLUID-CONVEYING PIPES

机译：多跨输液管的动态稳定性和自由振动
- 作者：Jong-Shyong Wu;Shou-Chih Lo;Ru-Min Chao
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- multi-span fluid-conveying pipe;
- analytical method;
- finite element method;
- Coriolis force;
- critical flow velocity;
41.AB INITIO STUDIES ON THE ELECTRONIC AND MAGNETIC PROPERTIES OF C15 NbCr_2 LAVES PHASE

机译：C15 NbCr_2相的电子和磁性性质的从头算研究
- 作者：T. Jeong
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- NbCr_2;
- electronic structures;
42.TECHNOLOGY FOR MACHINING OF Bi_4Ge_3O_(12) SCINTILLATOR CRYSTALS APPLICABLE IN-HOUSE

机译：内部适用于Bi_4Ge_3O_（12）闪烁晶体的加工技术
- 作者：Georgi Genov
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- BGO;
- crystal;
- machining;
- Bismuth Germanate Oxide;
- scintillator;
43.STRUCTURAL, COMPOSITIONAL AND PL PROPERTIES OF Cu(In_(1-x), Ga_x)Se_2 SOLAR CELL ABSORBERS DEPENDENCE ON THE STACKING ORDER OF THE PRECURSOR

机译：Cu（In_（1-x），Ga_x）Se_2太阳能电池吸收剂的结构，组成和PL特性取决于前驱体的堆积顺序
- 作者：F. B. Dejene
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第1期
- evaporation;
- thin films;
- stacked precursors;
- selenization;
- structure;
- composition;
- photoluminescence;
44.DEGRADATION PHENOMENON OF BITUMINOUS PAVEMENT IN SAHEL ZONE: CASE OF CHAD

机译：SAHEL地带自然路面的降解现象：乍得
- 作者：Annouar Djidda Mahamat;Kenmeugne Bienvenu;Moussa Ali Abdoulaye;Fogue Medard
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- crack;
- asphalt;
- temperature;
- energy;
45.THE EFFECT OF STRAIN LEVEL AND AGGREGATE SHAPE ON MECHANICAL RESPONSE OF ASPHALT MIXTURE BY DISCRETE ELEMENT METHOD

机译：离散元法研究应变水平和聚集体形状对沥青混合料力学响应的影响
- 作者：Huan Feng;Matteo Pettinari;Henrik Stang
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- viscoelastic;
- DEM;
- asphalt mixture;
- dissipated energy;
- aggregate gradation;
- aggregate shape;
46.A NEW APPROACH FOR EVALUATING THE PEDALLING EFFICIENCY OF A BIKE RIDER IN SEATED CYCLING BY USING THEORY OF ENGINEERING MECHANICS

机译：利用工程力学理论评估自行车骑行者自行车骑行效率的新方法
- 作者：Chia-Chin Wu;Donald Ballance
- 期刊名称：《International journal of materials engineering and technology》 | 2015年第2期
- engineering mechanics;
- rider-bike system;
- pedalling efficiency;
- crank torque;
- effective work;
47.DYNAMIC MECHANICAL ANALYSIS OF THERMALLY DEGRADED REAL-WORLD ELASTOMER SAMPLES

机译：热降解实心弹性体样品的动态力学分析
- 作者：Jiri Malac
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- dynamic mechanical analysis;
- vulcanized rubber;
- thermal degradation;
- cross-linking;
- viscoelasticity;
48.AN EFFICIENT NANOPARTICLES-SnO_2 GAS SENSOR FOR INDUSTRIAL APPLICATIONS

机译：一种高效的工业应用纳米颗粒-SnO_2气体传感器
- 作者：P. Yoboue;A. Konate;O. Asseu;P. Tety;P. Menini
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- gas sensors;
- high temperature;
- Pt-microhotplate;
- tin oxide;
- nanostructures;
49.LOCAL CONSTRUCTION OF HARMONIC MORPHISMS BY CONFORMAL DEFORMATION OF THE METRIC

机译：通过度量的共形变形来局部构造谐波形态
- 作者：Dantouma Kamissoko
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- Riemannian manifold;
- harmonic morphism;
- equivariant maps;
50.FRICTIONAL BEHAVIOR BETWEEN PISTON RING AND CYLINDER LINER IN ENGINE CONDITION WITH APPLICATION OF RECIPROCATING TEST

机译：活塞环与气缸套在发动机工况下的摩擦行为及往复试验的应用
- 作者：Mehmet Cakir;Ismail Hakki Akcay
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- cylinder liner;
- piston ring;
- friction;
- boronizing;
51.INTERDIFFUSION COEFFICIENTS OF BINARY MULTIPHASE SYSTEMS WITH CONSIDERATION OF VARIATION IN MOLAR VOLUMES

机译：考虑摩尔体积变化的二元多相系统的互扩散系数
- 作者：J. F. Li;P. A. Agyakwa;C. M. Johnson
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- intermetallics;
- miscellaneous;
- diffusion;
- phase interfaces;
- simulations;
- atomistic;
52.A POTENTIAL USAGE OF RESIDUAL SOIL AND CLASS F FLY ASH IN CONTROLLED LOW-STRENGTH MATERIALS

机译：受控低强度材料中残留土壤和F类粉煤灰的潜力
- 作者：Yeong-Nain Sheen;Li-Jeng Huang;Wen-Ling Huang;Duc-Hien Le
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- controlled low-strength material;
- fly ash;
- calcium chloride;
- workability;
- compressive strength;
- ultrasonic pulse velocity;
53.OPTICALLY CLEAR THIN FILMS FOR REDUCTION OF EARLY STAGE BIOFOULING

机译：减少早期生物浓缩的光学透明薄膜
- 作者：James Chapman;Robert Brown;Sonia Russell;Eolann Kitteringham;Laurianne Le Nor;Fiona Regan
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- biofouling;
- antifouling materials;
- PVC;
- marine;
54.PROTRUSION OF NO CENTRALLY COMPRESSED DAMAGED ROD, CONTACTING TO AN EXTERNAL AGGRESSIVE MEDIUM

机译：没有中央压缩的损坏杆，与外部粘性介质接触
- 作者：M. B. Akhundov;M. Z. Yusifov
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- protrusion;
- damageability;
- damaged rod;
- aggressive medium;
55.INVESTIGATION OF BARRIER INHOMOGENEITY INDUCED BY A NON-UNIFORM DISTRIBUTION AND TRAPS IN (Ni-Au)/Al_(0.25)Ga_(0.75)N/GaN/SiC HETEROSTRUCTURES WITH VARIOUS SCHOTTKY CONTACT AREAS

机译：各种肖特基接触区域中（Ni-Au）/ Al_（0.25）Ga_（0.75）N / GaN / SiC异质结构中非均匀分布和陷阱导致的不均匀性的研究
- 作者：Salah Saadaoui;Mohamed Mongi Ben Salem;Olfa Fathallah;Malek Gassoumi;Christophe Gaquiere;Hassen Maaref
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第1期
- AlGaN/GaN heterostructures;
- barrier inhomogeneity;
- deep traps;
- Schottky contact areas;
56.USE OF SPONGE-GOURD (Luffa cylindrica) AGRO-RESIDUE AS FILLER FOR RENEWABLE HIGH DENSITY POLYETHYLENE: DEVELOPMENT AND CHARACTERIZATION OF COMPOSITES

机译：丝瓜（丝瓜）农残作为可再生高密度聚乙烯填料的用途：复合材料的开发和表征
- 作者：Viviane A. Esc6cio;Elen B. A. V. Pacheco;Ana Maria F. de Sousa;Andre de P. Cavalcante;Leila L. Y. Visconte
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第2期
- agrofiber residue;
- sponge-gourds;
- bio-based HDPE;
- composites;
- renewable materials;
57.OSCILLATORY MHD FREE CONVECTIVE FLOW WITH HEAT SINK AND CHEMICAL REACTION

机译：带有热沉和化学反应的振荡MHD自由对流
- 作者：N. Ahmed;D. J. Bhattacharyya;D. P. Barua
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第2期
- MHD flow;
- Schmidt number;
- viscous dissipation;
- chemical reaction;
- heat sink;
- skin friction;
58.EPITAXIAL GROWTH OF GALLIUM NITRIDE THIN FILMS BY CATALYTIC REACTION ON RU NANOPARTICLES

机译：钌纳米粒子的催化反应氮化镓薄膜的表观生长
- 作者：Kanji Yasui;Yusuke Teraguchi;Yuta Nakazawa;Yasuaki Komae
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第2期
- GaN;
- catalytic reaction;
- Ru nanoparticle;
59.LINEAR OPTICAL PROPERTIES OF xBi_2O_3-(0.5-x)B_2O_3-0.5TeO_2 GLASSES IN THE SPECTRAL RANGE 0.2-2.5μm

机译：xBi_2O_3-（0.5-x）B_2O_3-0.5TeO_2玻璃在光谱范围0.2-2.5μm内的线性光学性质
- 作者：S. Y. El-Zaiat;G. M. A. Youssef;A. Abdullah;Sh. Kabasha
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第2期
- bismuth borate tellurite glasses;
- linear optical properties;
- complex refractive index;
- spectral dispersion;
60.MAGNETIC, SPECIFIC HEAT AND MCE STUDIES OF THE ANTIFERROMAGNETIC FRUSTRATED POWDER Er_2Ti_2O_7 AND THEIR MAGNETIC FIELD DEPENDENCE

机译：反铁磁碎粉Er_2Ti_2O_7的磁，比热和MCE研究及其磁场依赖性
- 作者：N. Ben Amor;M. Bejar;E. Dhahri;J.-L. Garden;M. P. F. Graca
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第2期
- pyrochlore;
- specific heat;
- magnetic entropy;
- magnetocaloric;
61.ADHESION PROPERTIES OF RUBBER TO STEEL JOINTS AT DIFFERENT TEMPERATURES

机译：橡胶在不同温度下对钢接头的粘结性能
- 作者：G. A. Morete;J. M. L. Reis
- 期刊名称：《International journal of materials engineering and technology》 | 2014年第2期
- rubber to steel joints;
- peel test;
- temperature;
62.COKE FORMATION QUANTITATIVE ANALYSIS ON IMPREGNATED AND SOL-GEL CATALYSTS APPLIED IN THE DRY REFORM OF METHANE

机译：甲烷干法改性浸渍和溶胶凝胶催化剂的结焦定量分析
- 作者：G. Goncalves;L. M. S. Colpini;R. Menechini Neto;O. A. A. Santos;L. M. M. Jorge;M. K. Lenzi
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- dry reforming;
- coke formation;
- nickel catalyst;
63.DRY SLIDING WEAR BEHAVIOR OF GRAPHITE FILLED POLYAMIDE66 COMPOSITE MATERIAL

机译：石墨填充聚酰胺66复合材料的干滑磨损性能
- 作者：Ch. Lakshmi Srinivas;M. M. M. Sarcar;K. N. S. Suman;K. R. Prakash
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- PA66 composites;
- sliding wear;
- SEM;
64.MULTIVARIABLE REGRESSION ANALYSIS OF OPTIMAL CONDITIONS FOR A PHYSICS-CHEMICAL PROCESS

机译：理化过程最优条件的多元回归分析
- 作者：V. A. Rusanov;S. V. Agafonov;A. V. Daneev;S. V. Lyamin
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- nonlinear vector regression;
- optimization of metal working;
65.DETERMINATION OF CONCENTRATIONS OF POLLUTANTS IN THE BUILDING CONSTRUCTION

机译：建筑施工中污染物浓度的测定
- 作者：Emmanuel Yamb;Francois Ngapgue
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- pollutants;
- wastewater;
- sewage treatment;
- concentration;
- method of determination;
66.DYNAMIC RECRYSTALLIZATION BY HOT ROLLING TO REFINE GRAINS OF ZK60 ALLOY

机译：ZK60合金细晶粒热轧动态再结晶。
- 作者：Jian-Yih Wang;D. C. Jeng;S. Lee;H. Y. Bor
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
- metals and alloys;
- microstructure;
- magnesium alloy;
- super plasticity;
- dynamic recrystallization;
67.CALCULATION MODEL OF ENERGETIC STABILITY IN FUNCTION OF THE PRESSURE OF THE GROUND STATE PROPERTIES OF NITRIDES γ-Fe_4N WHEN TRANSFORMED INTO OXIDE Fe_4O

机译：转变成氧化物Fe_4O时氮化物γ-Fe_4N的基态性质压力下的能量稳定性计算模型
- 作者：A. V. dos Santos
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
- perovskite;
- nitrides;
- electronic structure;
- energy of formation;
- LAPW;
- cohesive energy;
- stability;
- oxides;
68.MOLECULAR DYNAMICS SIMULATIONS OF CRYSTALLIZATION AND GLASS FORMATION IN PURE AND BINARY LIQUID METALS: Ni AND Ni-Zr

机译：纯和二元液态金属：Ni和Ni-Zr的结晶和玻璃形成的分子动力学模拟
- 作者：Lyamine Mokhtari;Rafik Maizi;Seddik Elhak Abaidia
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
- glass formation;
- molecular dynamics simulation;
- tight binding potential;
- quenching rate;
69.STATISTICAL ANALYSIS OF SURFACE ROUGHNESS PARAMETERS IN TURNING PEEK COMPOSITES

机译：车削PEEK复合材料表面粗糙度参数的统计分析
- 作者：Franscisco Mata;Emre Ozel;Mustafa Ozgur Oteyaka;Jose Tejero
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- surface roughness parameters;
- statistical design of experiments;
- turning;
- polymer matrix composites;
70.DEVELOPMENT OF AN OPTICAL FIBER SENSOR TO MONITORING THE FORMATION OF CRACKS IN CONCRETE STRUCTURES

机译：用于监测混凝土结构裂缝形成的光纤传感器的开发
- 作者：K. Rodriguez-Carmona;A. Duarte-Moller;P. Espinoza-Flores;A. Marquez-Lucero;A. Perez Hernandez
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- fissure monitoring;
- optical fiber;
- concrete structures;
71.A STUDY AND MODELING OF NON-CUMULATIVE ATTENUATION IN COILED OPTICAL FIBER WITH SMALL RADII OF CURVATURE

机译：弯曲半径小的光导纤维非累积衰减的研究与建模
- 作者：Karina Rodriguez;Miguel Orozco;Alberto Hernandez;A. Duarte-Moller;Alfredo Marquez;A. Perez-Hernandez
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- coiled optical fiber;
- light power attenuation;
- Marcuse model;
- non-cumulative attenuation;
72.INFLUENCE OF THE GROWTH RATE ON PHYSICAL PROPERTIES IN THE ALUMINUM-ANTIMONY EUTECTIC ALLOY

机译：生长速率对铝锑共晶合金物理性能的影响
- 作者：A. Aker;S. Engin;I. Yilmazer;H. Kaya
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- Al-Sb eutectic;
- mechanical properties;
- electrical properties;
- thermal properties;
73.ALUMINIUM ALLOYS: A SURVEY OF DATA IN THE LITERATURE

机译：铝合金：文献数据调查
- 作者：Dhia K. Suker
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第1期
- aluminium alloys;
- mechanical properties;
- recrystallisation dynamics;
- modeling;
74.AGGREGATION MODELING USING SINC METHODS OF SOLUTION TO THE STIELTJES FORMULATION OF THE POPULATION BALANCE EQUATION

机译：使用SINC方法对人口平衡方程的斯蒂杰斯公式进行集聚建模
- 作者：Frank Stenger;Terry A. Ring
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
75.NEW STRATEGY OF GAS TURBINES RENEWAL

机译：燃气轮机更新的新策略
- 作者：M. T. Dekhmouche;E. Hadjadj-Aoul
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
- renewal function;
- optimal maintenance policy;
- strategy;
- equipment reliability of exploitation;
- Monte Carlo method;
76.CONTROL OF HOT SPOTS FOR CONTINUOUS MICROWAVE IRON MAKING: EFFECTS OF ORE- CARBON MIXTURE ROTATIONS ON REFRACTORY AND PIG IRON PRODUCTION

机译：连续微波制铁热斑的控制：矿碳混合旋转对耐火和生铁生产的影响
- 作者：Masahiro Yanagawa;Keiichiro Kashimura;Miyuki Hayashi;Motoyasu Sato;Tomohiko Mitani;Naoki Shinohara;Kazuhiro Nagata
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
- hot spot;
- pig iron;
- microwave heating;
- refractory;
- chemical composition;
77.A NUMERICAL ALGORITHM FOR THE INTEGRATION OF THE EQUILIBRIUM DYNAMIC EQUATION OF A SDF SYSTEM ACTED BY AN ARBITRARY LOADING

机译：任意载荷作用下SDF系统平衡动力方程积分的数值算法
- 作者：Tahar Latrache
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
- numerical algorithm;
- SDF systems;
- equilibrium dynamic equation;
- arbitrary loading;
- Gauss Quadrature;
78.ON THE PREPARATION OF SILVER NANOSTRUCTURES BY PRECIPITATION IN BICONTINUOUS MICROEMULSIONS

机译：双连续微乳液沉淀法制备银纳米结构的研究
- 作者：E. C. de la Cruz;J. C. Ortiz-Cisneros;F. Avalos-Belmontes;R. Diaz de Leon;L. F. Ramos-deValle;H. Saade;R. G. Lopez
- 期刊名称：《International journal of materials engineering and technology》 | 2013年第2期
- worm-like silver nanoparticles;
- precipitation reactions;
- bicontinuous microemulsions;
79.DESIGN OF A FLANGED RING PRODUCED BY HOT FORMING USING FE ANALYSIS

机译：基于有限元分析的热成型法兰盘设计
- 作者：Manuel Monti;Guido Berti
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- FEM;
- piercing;
- shearing;
- ring rolling;
- upsetting;
80.A STUDY ON CRACK INITIATION BEHAVIOR IN BOTH EXTRUDED AND ROLLED MAGNESIUM MATERIALS

机译：镁材料的挤压和轧制裂纹萌生行为的研究
- 作者：A. Horita;S. Ishihara;H. Shibata;S. Nishino;T. Goshima
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- fatigue;
- crack initiation;
- finite element analysis;
- AZ31B magnesium alloy;
- intermetallic compound;
- stress concentration;
81.SUPPRESSED HYDROGEN SOLUBILITY IN BODY CENTRED CUBIC Va-GROUP METAL (Nb AND Ta) BY ALLOYING WITH W OR Ru ANALYSED ON THE BASIS OF STATISTICAL THERMODYNAMICS

机译：基于统计热力学分析的W或Ru合金分解法抑制了以身体为中心的立方钒金属（Nb和Ta）中氢的溶解度
- 作者：Nobumitsu Shohoji
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- statistical thermodynamics;
- interstitial compound;
- non-stoichiometry;
- Nb-W-H;
- Nb-Ru-H;
- Ta-W-H;
82.STUDY OF A SYSTEM FOR USE OF PREDICTIVE MAINTENANCE INDUSTRIES IN FORMING OF CERAMIC PLATES WITH CONTINUOUS PROCESS OF PRODUCTION

机译：具有连续生产过程的陶瓷板形成中使用预测性维护体系的系统的研究
- 作者：Vilson Gruber;Vilson Menegon Bristot;Vilmar Menegon Bristot;Lirio Schaeffer
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- management;
- maintenance;
- coatings;
83.NUMERICAL SIMULATION OF THE SWAGE TUBE FORMING (STF) IN CYLINDERS

机译：圆柱管成形的数值模拟
- 作者：H. Barbachano;J. M. Alegre;I.I. Cuesta
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- swage tube forming (STF);
- FEM;
- initial residual stresses;
84.EVOLUTION OF MICROSTRUCTURES AND MECHANICAL PROPERTIES IN DISSIMILAR FRICTION WELDING OF AA2014 AND AA6082

机译：AA2014和AA6082异种摩擦焊接的微观组织和力学性能的演变
- 作者：K. Varaprasada Rao;N. Ramanaiah;G. Padmanabhan;K. Prasad Rao
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- dissimilar welding;
- friction welding;
- microstructure;
- mechanical properties;
- process parameters and al alloys;
85.HOT DEFORMATION CHARACTERIZATION OF Al-Cu-Mg-Fe-Ni ALUMINIUM ALLOY

机译：Al-Cu-Mg-Fe-Ni铝合金的热形变表征
- 作者：D. K. Suker
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- Al-Cu-Mg-Fe-Ni aluminium alloy;
- hot deformation;
- processing map;
- dynamic recrystallization;
86.A REVIEW PAPER ON VEHICLE CRASH AND ROAD SAFETY MANUFACTURING

机译：车辆碰撞和道路安全制造研究报告
- 作者：Hamid Reza Karimi;Witold Pawlus;Kjell G. Robbersmyr
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- vehicle crash;
- safety;
- road manufacturing;
87.PRODUCTION, STRUCTURAL CHARACTERIZATION AND THE STUDY OF STABILITY OF Ba_2AlZro_(5.5) CERAMICS IN CRUDE PETROLEUM FOR INERT CERAMIC EMBEDDING OF TEMPERATURE SENSORS USED IN PETROLEUM INDUSTRY

机译：石油工业中用于温度传感器的惰性陶瓷嵌入的原油中Ba_2Alzro_（5.5）陶瓷的生产，结构表征和稳定性研究
- 作者：Yogendra Prasad Yadava;Luciana Perreira Bezerra;Ricardo Artur Sanguinetti Ferreira
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- Ba_2AlZrO_(5.5);
- sintering;
- microstructure-fmal;
- mechanical properties;
- structural applications.;
88.A STUDY OF THE INFLUENCE OF THE PARAMETERS OF DEVELOPMENT OF FIBERS ON THE DYNAMOMETRIC PROPERTIES OF YARNS

机译：纤维发展参数对纱线动态性能的影响研究
- 作者：Fehmi Bouhjar;Mehdi Sahnoun;Morched Cheikhrouhou
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
89.XPS AND EPR STUDY OF V_2O_5/SiO_2, V_2O_5/TiO_2, AND V2O5/A12O3 MIXED OXIDES OBTAINED BY SOL GEL METHOD

机译：溶胶凝胶法获得的V_2O_5 / SiO_2，V_2O_5 / TiO_2和V2O5 / Al2O3混合氧化物的XPS和EPR研究
- 作者：Leda Maria Saragiotto Colpini;Giane Goncalves Lenzi;Antonio Medina Neto;Creusa Maieru Macedo Costa
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- sol gel;
- vanadia;
- mixed oxides;
- characterization;
90.FAILURE ANALYSIS OF 316L STAINLESS STEEL SEAMLESS TUBE

机译：316L不锈钢无缝管的失效分析
- 作者：K. M. Hafez;M. Ramadan
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- failure analysis;
- stainless steel;
- tube;
- pitting;
91.DETERMINATION OF FRICTION COEFFICIENT IN SHEET METAL FORMING THROUGH BENDING UNDER TENSION TEST

机译：拉伸试验通过弯曲成形板料中的摩擦系数的测定
- 作者：Luis Fernando Folk;Jose Luiz Ferrarini;Lirio Schaeffer
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- bending under tension test;
- friction coefficient;
- sheet metal forming process;
92.LANGEVIN EQUATION OF ROUGH SURFACE FOR OBLIQUE BALLISTIC DEPOSITION

机译：倾斜弹道沉积的粗糙表面朗格文方程
- 作者：Salimeh Kimiagar;Seyed Ayat Ghazisaeed
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第1期
- ballistic deposition;
- simulation;
- markov;
- langevin;
- probability function;
- fluctuation;
- fokker-planck;
- kardar-parisi-zhang;
93.EFFECTS OF ELECTRODE PLATING ON MECHANICAL PROPERTIES OF PZT CERAMICS

机译：电极电镀对PZT陶瓷力学性能的影响
- 作者：Mitsuhiro Okayasu;Mamoru Mizuno;Tetsuro Shiraishi
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- PZT ceramic;
- electrode plating;
- mechanical properties;
- surface roughness;
94.DEVELOPMENT OF A TOOL FOR INDIRECT EXTRUSION OF A PREFORM IN COMMERCIALLY PURE TITANIUM Gr 4 FOR DENTAL IMPLANTS

机译：用于牙种植体的商业纯钛Gr 4预制棒间接挤压工具的开发
- 作者：L. D. Bilessimo;L. C. C. Cavaler;L. Schaeffer
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- indirect extrusion;
- commercially pure titanium Gr 4;
- tool;
- dental implants;
95.FABRICATION AND CHARACTERIZATION OF 5083 Al-Al_2O_3 SURFACE COMPOSITE BY FRICTION STIR PROCESSING

机译：摩擦搅拌法制备5083 Al-Al_2O_3表面复合材料及其表征
- 作者：Sukhdeep Singh;Dharmpal Deepak;V. K. Gupta
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- friction stir processing;
- nano-composite;
- hardness;
- wear;
96.MORPHOLOGY AND QUANTITY OF GAS POROSITY AS THE RESULT OF DURALUMIN CAST ON REVEBERATORY FURNACE

机译：硬质合金铸造炉产生的气孔形态和数量
- 作者：Wahyono Suprapto;Bambang Suharno;Johny Wahyuadi Sudarsono;Dedi Priadi
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- porosity;
- castability;
- characterization;
- solidification;
- pycnometry;
97.NANOSTRUCTURE, OPTICAL AND ELECTRICAL PROPERTIES OF THERMALLY EVAPORATED CdS_(0.1)Se_(0.9) THIN FILMS WITH DIFFERENT THICKNESS

机译：厚度不同的热蒸发CdS_（0.1）Se_（0.9）薄膜的纳米结构，光学和电学性质
- 作者：Alaa A. Akl
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- thermal evaporation;
- X-ray diffraction;
- electrical resistivity;
- optical properties;
98.SYNTHESIS AND CHARACTERIZATION OF FUNCTIONALIZED CARBON NANOTUBES EMPLOYING COBALT NITRATE AND ACETONE BY USING SPRAY PYROLYSIS DEPOSITION TECHNIQUE

机译：喷雾热解法合成硝酸钴和丙酮的功能化碳纳米管的合成与表征
- 作者：Jorge A. Gomez;Alfredo Marquez;M. Avalos-Borja;Antonino Perez;A. Duarte-Moller;E. Orrantia Borunda
- 期刊名称：《International journal of materials engineering and technology》 | 2012年第2期
- SWNT;
- spray pyrolysis;
- functional materials;
- carbon;
- nanotubes;
99.THE EFFECT OF THE DEPOSITION METHOD ON THE MORPHOLOGY, STRUCTURE, REFRACTIVE-INDEX DISPERSION AND OPTICAL ABSORPTION OF As-BASED AMORPHOUS CHALCOGENIDE FILMS

机译：沉积方法对非晶态硫族硫化物薄膜的形貌，结构，折射率分布和光吸收的影响
- 作者：E. MARQUEZ;J. M. GONZALEZ-LEAL
- 期刊名称：《International journal of materials engineering and technology》 | 2011年第1期
- amorphous chalcogenides;
- thin-film deposition techniques;
- atomic structure;
- optical properties;
100.EFFECTS OF AUSTENITIZING ON THE FRACTURE MECHANISM OF HARDENED HIGH CARBON STEEL

机译：奥氏体化对硬化高碳钢断裂机制的影响
- 作者：A. CHENNAKESAVA REDDY
- 期刊名称：《International journal of materials engineering and technology》 | 2011年第1期
- austenitizing;
- fracture mechanism;
- high carbon steel;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号