首页>外文会议>其他>21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement

21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Research on measuring magnetism of weight using gaussmeter

机译：高斯计测量砝码磁性的研究
- 作者：Zhong Ruilin;Wang Man;Yao Hong;Dingjin an;Cai Changqin;Zhang Yue
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- magnetism;
- weight;
- gaussmeter;
2.DYNAMIC AXIS SCALE WITH HIGH ACCURACY FOR HIGH SPEED MEASUREMENT OF VEHICLE MASS

机译：高准确度的动态轴刻度，可快速测量车辆质量
- 作者：David Gichangi Axelson;Koji Tada;Tuan Le;Shinichi Hayashida;Toshio Uchimaru;Yutaka Yamamoto
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- dynamic mass;
- momentum;
- vehicle mass measuring;
3.DYNAMIC BEHAVIOR OF CHECKWEIGHER WITH ELECTROMAGNETIC FORCE COMPENSATION (2ND REPORT)

机译：带有电磁力补偿的CHECKWEIGER的动态行为（第二次报告）
- 作者：Y. Yamakawa;T. Yamazaki
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- mass measurement;
- electro-magnetic force compensation system;
- dynamic behavior;
4.EVALUATION OF UNCERTAINTY OF CONTACT POINT AND CONTACT DEPTH BY USING NON-LINEAR FITTING

机译：非线性拟合法评估接触点和接触深度的不确定度
- 作者：Koichiro Hattori;Yutaka Seino
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- instrumented indentation test;
- uncertainty of fitting;
5.INVESTIGATION OF TEST FORCE OF REFERENCE HARDNESS STANDARD OF CROATIA

机译：克罗地亚参考硬度标准的试验力研究
- 作者：Zeljko Alar;Mladen Franz;Tamara Aleksandrov
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- reference hardness standard;
- force;
- measurement uncertainty;
6.RESULTS OF THE BRINELL HARDNESS PROFICIENCY TEST AND THE IMPORTANCE OF STANDARD INDENTATION

机译：布氏硬度测试的结果和标准识别的重要性
- 作者：Gunwoong Bahng;Nae Hyung Tak;Jong Soo Chung;Sang Bo Bae
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- hardness;
- reference indentation;
- brinell;
7.CURRENT STATUS OF REBOUND HARDNESS TEST BLOCKS IN JAPAN AND OUTLOOK

机译：日本和展望的反弹硬度测试块的当前状态
- 作者：Takashi Yamamoto;Masayuki Yamamoto;Satoshi Takagi
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
8.RESEARCH OF NEW INDUSTRIAL HARDNESS TESTING USING 'EQUIVALENT INDENTATION DEPTH Ah_e'

机译：使用“等效指示深度Ah_e”的新型工业硬度测试的研究
- 作者：Takashi Yamamoto;Masayuki Yamamoto;Kensuke Miyahara
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
9.CONSIDERATION OF THE UNCERTAINTY OF MEASUREMENT DURING THE CALIBRATION OF HARDNESS TEST MACHINES

机译：校准硬度试验机期间测量不确定性的考虑
- 作者：Dieter Schwenk
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- uncertainty of measurement;
- limit deviation;
- ISO 17025;
10.Development of Primary Vickers Hardness Testing Machine

机译：维氏硬度试验机的研制
- 作者：F.Menalo;G.Mohamed;M.I.Mohamed;A.A.Abuelezz;M.Adly;A.A.Khatab
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- vickers hardness;
- hardness standard machine;
11.COMPACT MICRO FORCE GENERATOR WITH TANDEM LEAF SPRING AND VCA ON MICRO ROBOT FOR MICRO HARDNESS AND STIFFNESS TEST.

机译：微型叶轮和VCA在微型机器人上的微型力发生器，用于微硬度和刚性测试。
- 作者：Montree Pakkratoke;Natchapon Luekiatphaisan;Hisayuki Aoyama;Tassanai Saneponpute
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- voice coil actuator;
- tandem leaf spring mechanism;
- strain gauge;
- inchworm micro robot;
- micro indenter;
12.STUDY ON METHODS FOR MEASURING VICKERS INDENTATIONS

机译：威克维数的测量方法研究
- 作者：Takashi Yamamoto;Masayuki Yamamoto;Koichiro Hattori
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- vickers hardness test;
- numerical aperture;
13.AN INVESTIGATION INTO DEPTH SENSNING OF HARDNESS MAPS BY MEANS OF IMAGE PROCESSING TECHNIQUES

机译：图像处理技术对硬度图深度感知的研究
- 作者：Malek Naderi;Kasra Sardashti;Ali Sharbatian;Mehdi Iranmanesh
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- depth sensing;
- hardness map;
- image processing;
14.BEHAVIOR OF PURE TORQUE AND TORQUE WITH CROSS FORCE MEASUREMENT OF TORQUE TRANSDUCER

机译：纯扭矩和扭矩测量与扭矩传感器的交叉力行为
- 作者：Tassanai Sanponpute;Chokchai Wattong;Nittaya Arksornarong
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- pure torque;
- torque with cross force;
- load lateral force;
15.3-D SURFACE ROUGHNESS PROFILE OF 316-STAINLESS STEEL USING VERTICAL SCANNING INTERFEROMETRY WITH A SUPERLUMINESCENT DIODE

机译：垂直扫描干涉法与超发光二极管对316不锈钢的3D表面粗糙度曲线
- 作者：Wirun Laopornpichayanuwat;Jakkapol Visessamii;Montian Tianprateep
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- roughness;
- Vertical scanning interferometry (VSI), Continuous wavelet transform (CWT);
16.CREEP MEASUREMENT IN REFERENCE TORQUE CALIBRATION MACHINES

机译：参考扭矩校准机的蠕变测量
- 作者：Andreas Briige
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- torque transducer;
- creep;
- reference calibration machine;
17.IMPROVEMENTS OF THE NATIONAL HARDNESS PRIMARY STANDARD MACHINE ON VICKERS SCALES

机译：国家硬质标准机在维氏标度上的改进
- 作者：Edward Aslanyan;Peter Krasowski;Aleksandr Doynikov;Victor Pivovarov
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- hardness primary standard machine, Vickers scales COOMET regional key comparison;
18.OPTIMUM DIMENSIONS OF DWM LOADING FRAME

机译：DWM加载框架的最佳尺寸
- 作者：A. Abu-Sinna;Yon-Kyu Park;Dae-Im Kang;Min-SeokKim
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- deadweight machine;
- loading frame;
- loadcell;
- fem;
19.THE UNCERTAINTY OF PITCH AND YAW RE-EVALUATED FOR PRIMARY ROCKWELL HARDNESS STANDARD SYSTEM IN CMS

机译：CMS一次洛氏硬度标准系统螺距和横摆不确定度的重新评价。
- 作者：Chiu-Hsien Chen;Sheau-shi Pan
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- rockwell hardness;
- 3-axis compact interferometer;
- indenter axis;
20.OPTOELECTRONIC PHASE DELAY MEASUREMENT FOR A MODIFIED MICHELSON INTERFEROMETER

机译：改进的迈克尔逊干涉仪的光电相位延迟测量
- 作者：Thomas Bruits;Frank Blume;Kai Baaske;Mark Bieler
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- phase response;
- laser interferometer;
- response time;
21.STUDY ON A SIMPLIFIED IMPLEMENTATION OF HOMODYNE TIA METHOD FOR LOW FREQUENCY PRIMARY VIBRATION CALIBRATION

机译：低频主振动标定的均一TIA方法的简化实现
- 作者：Qiao Sun;Chenguang Cai
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- primary vibration calibration;
- time interval analysis method;
- homodyne interferometry;
22.A NEW SYSTEM FOR PRIMARY INTERFEROMETRIC CALIBRATION OF VIBRATION TRANSDUCERS AT LOW FREQUENCIES

机译：低频振动传感器主干涉测量的新系统
- 作者：Gustavo P. Ripper;Caue D. Ferreira;Dimas B. Teixeira;Ronaldo S. Diets;Giancarlo B. Micheli
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- vibration;
- acceleration;
- metrology;
23.MEASUREMENT AND EVALUATION OF DAMPING PROPERTIES OF DAMPING MATERIAL

机译：阻尼材料阻尼性能的测量与评价
- 作者：Cheneuans Cai;Qiao Sun
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- damping material;
- damping ratio;
- nonlinear vibration;
24.REFERENCE VIBRATION CALIBRATION EQUIPMENT AT LNE: INFLUENCE OF METHODS AND EXCITERS

机译：LNE的参考振动校准设备：方法和激励器的影响
- 作者：Claire BARTOLL Philippe A VERLANT;Cedric de Waubert
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- accelerometer;
- vibration;
- calibration;
25.APPLICATION OF CONTINUOUS MULTIPLE LOADING WITH SPHERICAL- TIP NANOINDENTATION TO MECHANICAL PROPERTY EVALUATIONS OF INDUSTRIAL MATERIALS

机译：球形尖端连续多次加载在工业材料力学性能评估中的应用
- 作者：Ikuo Ihara;Takanobu Matsumoto;Yoshikazu Yajima;Jun-ichi Uegaki;Yoshikazu Shima
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- spherical indentation;
- stress-strain curve;
- continuous multiple loading;
26.GRID NANOINDENTATION ON MULTIPHASE MATERIALS FOR MAPPING THE MECHANICAL PROPERTIES OF COMPLEX MICROSTRUCTURES

机译：映射纳米微结构复杂力学性能的材料
- 作者：Jiri Nohava;Petr Hausild;Nicholas X. Randall;Gregory Favaro
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- (up to three): grid indentation;
- multiphase materials;
- statistics;
27.Correlation between Nanoindentation Test Result and Vickers Hardness

机译：纳米压痕测试结果与维氏硬度的相关性
- 作者：Takeshi Sawa
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- indentation hardness;
- vickers hardness;
- indentation work;
28.A STUDY ON VOLUMETRIC MAGNETIC SUSCEPTIBILITY OF WEIGHT DUE TO ITS MANUFACTURING PROCESS

机译：制造过程中重量的体积磁化率研究
- 作者：Rungsiya Sukhon;Rattapon Kongchana;Kusuma Khongsiri;Baramee Puntaratronnugoon;Veera Tulasombut
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- weight;
- magnetic susceptibility;
- manufacturing process;
29.ESTABLISHED THE DENSITY STANDARD OF NATIONAL INSTITUTE OF METROLOGY (THAILAND)

机译：制定了国家计量学院的密度标准（泰国）
- 作者：Tosapon Paneviwate;Monchai Mitaree;Rungsiya Sukhon;Wirun Laopornpichayanuwat;Veera Tulasombut
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- density;
- density hydrometer;
- hydrostatic weighing;
- silicon standard;
30.INFLUENCE OF AERODYNAMIC EFFECTS IN DEADWEIGHT MACHINES

机译：气动效应在失重机中的影响
- 作者：Danilo Quagliotti;Alessandro Germak;Fabrizio Mazzoleni
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- aerodynamics effects;
- force;
31.Upgrading of the Rockwell Hardness Primary Standard Machine

机译：洛氏硬度初级标准机的升级
- 作者：He Li;Zhang Feng;Ye Ming;Liu Lianqiu;Wang Beiping
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- new definition for rockwell hardness;
- toothed-belt drive;
- hydraulic transmission;
- loading monitor system;
32.Research on Air density Measurement for measuring weights

机译：空气密度测量技术研究
- 作者：WANG Xiao-lei;WANG Jian;ZHONG Rui-lin;ZHANG Yue;CAI Chang-qing;YAO Hong;DING Jing-an
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- Air density;
- Weight;
- Air buoyancy correction;
- CIPM-2007 equation;
33.ACTIVITY OF INTERLABORATORY COMPARISON ON WEIGHT MEASUREMENT IN THAILAND

机译：在泰国进行体重测试的实验室间比较活动
- 作者：Rungsiva Sukhon;Wirun Laopompichayanuwat;Monchai Mitaree;Tossapon Pangviwaf;Veera Tulasombut
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- weight;
- interlaboratory comparison;
- thailand;
34.TRACEABLE CALIBRATION OF ELECTRICAL COMPONENTS REGARDING AMPLITUDE AND PHASE DISPLACEMENT IN THE FREQUENCY RANGE OF 0.15 HZ TO 12.5 (50) KHZ

机译：0.15 HZ至12.5（50）KHZ频率范围内有关幅度和相位移的电气组件的可追溯校准
- 作者：Holger Nicklich;Uwe Biihn;Heiko Deierlein;Frank Schulz;Michael Mende
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- phase measurement;
- voltage measurement;
- traceability;
35.THE INFLUENCE OF THE TIME EXTENSION ON THE PRELIMINARY TEST FORCE IN ROCKWELL HARDNESS MEASUREMENTS

机译：时间延长对洛氏硬度测量中初步测试力的影响
- 作者：Renato Reis Machado;Jorge Trota Filho;Sergio Pinheiro de Oliveira;Islei Domingues da Silva;Bianca da C. O. Muniz
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- ISO 6508 revision;
- hardness testing;
- preliminary test force;
36.IMPROVED METHODS FOR ACCURATELY CALIBRATING THE 3D GEOMETRIES OF ROCKWELL INDENTERS

机译：精确校准洛氏井口3D几何的改进方法
- 作者：Gaoliang Dai;Jian Zhao;Febo Menelao;Konrad Herrmann;Uwe Brand
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- rockwell indentation;
- metrological stylus profilometer;
- correction;
37.UNCERTAINTY CONTRIBUTION IN THE CASE OF COSINE FUNCTION WITH ZERO ESTIMATE - A PROPOSAL

机译：余弦函数为零的情况下不确定性的贡献-建议
- 作者：Dirk Roske
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- uncertainty;
- cosine function;
- zero estimate;
38.MECHANICAL DESIGN OF NIS NEW REFERENCE TORQUE STANDARD MACHINE

机译：NIS新参考扭矩标准机的机械设计
- 作者：K.M.Khaled;G.Aggag;A.EAbuelezz;M.G.Elsherbiny
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- torque;
- torque standard machine;
- traceability;
39.INTERLABORATORY COMPARISONS IN ITALY TO VERIFY THE ACCREDITATION ON TORQUE WRENCH CALIBRATION

机译：在意大利进行实验室间比较以验证扭力扳手校准的认可
- 作者：Carlo Ferrero;Adelina Leka;Luciano Bianchi
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- torque-wrenches;
- dissemination;
- comparison;
40.HIGH PRECISSION OPTICAL POSITION SENSOR FOR ELECTROMAGNETIC FORCE COMPENSATED BALANCES

机译：电磁力补偿平衡的高精度光学位置传感器
- 作者：Christian Diethold;Thomas Frohlich;Falko Hilbrunner;Gerd Jaeger
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- position sensor;
- zero point detection;
- balance with electromagnetic force compensation;
41.IMPROVEMENT OF MEASUREMENT CAPABILITIES OF MULTIPLE MASS STANDARDS OF 1 kg AT NPLI

机译：NPLI中1 kg多种质量标准的测量能力的提高
- 作者：Goutam Mandal;C. K. Gopan
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- subdivision substitution method;
42.DEVELOPING MULTICOMPONENT FORCE TRANSDUCERS AT INRIM

机译：在INRIM开发多组件力传感器
- 作者：Sergio Desogus;Alessandro Germak;Fabrizio Mazzoleni;Danilo Quagliotti;Giulio Barbato;Arturo Barbieri;Giacomo Bigolin;Carlo Bin
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- force;
- multicomponent;
- calibration;
43.CONSTRUCTION OF A STANDARD FORCE MACHINE FOR THE RANGE OF 100 μN - 200 mN

机译：范围为100μN-200 mN的标准力机器的构造
- 作者：Christian Schlegel;Oliver Slanina;Gunther Haucke;Rolf Kumme
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- force standard machine;
- small forces;
- force transducer;
- iso 376;
- electromagnetically compensated balance;
44.10 MN BUILD-UP FORCE STANDARD MACHINE DEVELOPED IN CHINA

机译：在中国开发的10百万升力量标准机
- 作者：Li Oinszhons;Yao Jinhui;Xu Hang;Li Haigen;Li Ting yuan
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- build-up force standard machine;
- build-up measuring system;
- relative uncertainty;
45.VACUUM TRANSFER SYSTEM FOR LOADING THE SARTORIUS PROTOTYPE MASS COMPARATOR CCL1007

机译：加载SARTORIUS原型质量比较器CCL1007的真空传输系统
- 作者：Thomas Frohlich;Thomas Fehling;Detlef Heydenbluth;Matthias Geyer;Ralf Schiller
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
46.A NEW METHOD FOR DYNAMIC FORCE MEASUREMENT AT NIM

机译：NIM动态力测量的新方法
- 作者：Mens Fensr;Zhang Yue;Zhang Zhimin;SunQiao
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- dynamic force calibration;
- laser-Doppler-interferometer;
- standard machine;
47.COMPARISON OF DIFFERENT LOAD CHANGERS FOR EMFC-BALANCES

机译：EMFC平衡的不同负载变化的比较
- 作者：F. Hilbrunner;H. Weis;T. Frohlich;G. Jdger
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- check weigher;
- measurement time;
- load changer;
48.THE 250 KILONEWTON PRIMARY SHOCK FORCE CALIBRATION DEVICE AT PTB

机译：PTB的250 KILONEWTON主震力校准装置
- 作者：Michael Kobusch;Thomas Bruns;Leonard Klaus;Michael Muller
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- shock force calibration;
- impact;
- laser-doppler interferometry;
49.A NEW FACILITY FOR CONTINUOUS AND DYNAMIC FORCE CALIBRATION WITH FORCES UP TO 100 KN

机译：力高达100 KN的连续和动态力校准的新设备
- 作者：RolfKumme;Bernd Glockner;Christian Schlegel
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- dynamic force calibration;
- dynamic reference transducer;
50.PARAMETRIC MECHATRONIC MODEL OF A LOAD CELL WITH ELECTROMAGNETIC FORCE COMPENSATION

机译：具有电磁力补偿的称重传感器的参数机电模型
- 作者：Hanna Weis;Falko Hilbrunner;Thomas Frohlich;Gerd Jaeger
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- simulation of complex mechatronic systems;
- optimisation of parameters;
- force measurement;
51.RADIAL SHEAR BEAMS USED AS HIGH PRECISION TRANSFERE TRANSDUCERS

机译：径向剪切梁用作高精度传输传感器
- 作者：Thomas Kleckers
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- reference force transducer;
- radial shear beams;
- force calibration;
52.MULTICOMPONENT-TRANSDUCERS: DEFINITION, CONSTRUCTION TYPES AND CALIBRATION CONSIDERATIONS

机译：多组件传感器：定义，构造类型和校准注意事项
- 作者：Daniel Schwind
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- force;
- moment;
- multicomponent;
53.AN INVESTIGATION OF DENSITY DETERMINATION METHODS FOR POROUS MATERIALS, SMALL SAMPLES AND PARTICULATES

机译：多孔材料，小样品和微粒的密度测定方法的研究
- 作者：Stuart Davidson;Michael Perkin
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
54.INTERLABORATORY COMPARISON ON ROCKWELL HARDNESS MEASUREMENT IN THAILAND

机译：泰国洛氏硬度测量的实验室间比较
- 作者：Tassanai Sanponpute;Veera Tulasombut;Rugkanawan Kongkavitoof;Apichaya Meesaplak
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- rockwell;
- interlaboratory comparison;
55.COMPARISON OF NANOINDENTATION TESTERS IN TAIWAN

机译：台湾纳米技术的比较
- 作者：Yi-Ching Lin;Ya-Ko Chih
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- nanoindentation;
- elastic modulus;
- hardness;
56.EXAMPLES AND PROPOSED SOLUTIONS REGARDING THE GROWING IMPORTANCE OF CALIBRATION OF HIGH NOMINAL FORCES

机译：有关标称力校准越来越重要的示例和建议的解决方案
- 作者：A. Schdfer
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- reference force transducers;
- extrapolation;
- built-up system;
57.NON AUTOMATIC WEIGHBRIDGES SCALES INTERCOMPARISON IN SPAIN: A DIFFERENT APPROACH

机译：非自动重量级刻度在西班牙的比较：一种不同的方法
- 作者：Nieves Medina;Jose Angel Robles
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- weighbridges scale;
- comparison;
58.CALIBRATION OF SECONDARY STANDARD LEAKS BY MEANS OF MASS COMPARISON

机译：用质量比较法校准二次标准泄漏
- 作者：Dominik Prazdk;Jaroslav Zuda;Ladislav Peksa
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- atmospheric leaks;
- refrigerant leaks;
59.LEEB HARDNESS-CALIBRATION-MACHINE

机译：里氏硬度标定机
- 作者：Dieter Schwenk
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- leeb-hardness;
- drop impact test;
- laser interferometer;
60.DEVELOPMENT OF PORTABLE ANGULAR VIBRATION EXCITERS

机译：便携式角振动激励器的开发
- 作者：Wan-Sup Cheuns;Tae-Ik Park
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- angular vibration;
- vibration exciter;
- angular exciter;
- vibration calibration;
- electro-dynamic exciter;
61.LOW FREQUENCY VIBRATION MONITORING SYSTEM USING WIRELESS SENSOR NETWORK

机译：无线传感器网络的低频振动监测系统
- 作者：N.Ruetaiworraseth;W.Suntiamorntuf;B.Thummawut;P. Rattanangku
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- vibration monitoring system;
- wireless sensor network;
- acceleration;
- low frequency;
62.IMPLEMENTING A SHOCK-FORCE CALIBRATION SYSTEM USING A VIBRATION EXCITER AND PENDULUM

机译：使用振动激励器和摆锤实现震荡标定系统
- 作者：Christiaan S. Veldman
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- shock;
- dynamic force;
- calibration;
- impulse hammer;
63.A ROUND ROBIN TEST OF SHOCK ACCELERATION CALIBRATION AMONG TWO PRIVATE LABORATORIES AND NMIJ

机译：两个私人实验室和NMIJ进行震荡校准的轮循测试
- 作者：Hideaki Nozato;Takashi Usuda;Akihiro Oota;Seiji Okamoto;Ken Yamamoto;Hiroshi Unejima;Kazuaki Kawaguchi;Ishigami Tamio
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- shock acceleration;
- pick-up;
- accelerometer;
- round robin;
64.POSSIBILITY OF IMPROVING CORRECTIONS FOR ROCKWELL HARDNESS VALUE OBTAINED ON CONVEX CYLINDRICAL SURFACES

机译：凸圆柱面上获得的洛氏硬度值修正的可能性
- 作者：Tassanai Sanponpute;Nitiwat Sasom;Apichaya Meespalak
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- rockwell hardness;
- corrections;
- convex cylindrical;
65.DEVELOPMENT OF NANOINDENTATION TESTER WITH A RAMAN SPECTROSCOPY INTERFACE FOR MATERIAL CHARACTERIZATION

机译：具有拉曼光谱界面的纳米表征测试仪的研制
- 作者：Masayuki Fuiitsuka;Makoto Yamaguchi;Shigeru Ueno;Ichiro Miura;Shigeo Katayama
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- raman spectroscopy;
- residual stress;
- surface observation;
66.The Effect of High Transverse Inputs on Accelerometer Calibration

机译：高横向输入对加速度计校准的影响
- 作者：Richard W. Bono;Eric J. Seller;Mark I. Schiefer
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- calibration;
- transverse;
- accelerometer;
67.SOME PROBLEMS USING REFERENCE RUBBER BLOCKS AS A STANDARD

机译：使用参考橡胶块作为标准的一些问题
- 作者：Anton Stibler;Febo Menelao;Konrad Herrmann
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- rubber hardness testers;
- rubber hardness blocks;
- calibrations;
68.EXPERIMENTAL INVESTIGATION INTO THE EFFECTS OF EXCITER MOTIONS ON THE PRIMARY CALIBRATION OF SINGLE-ENDED ACCELEROMETER

机译：激励运动对单端加速度计主校准影响的实验研究
- 作者：C. Hirunyapruk;P. Rattanangkul;B. Thummawut;V. Plangsangmas
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- shaker motions;
- primary vibration calibration;
- single-ended accelerometer;
69.INTERLABORATORY COMPARISON OF FORCE MEASUREMENT IN THAILAND

机译：泰国测力的实验室间比较
- 作者：Kittipons Chaemthet;Chanchai Amornsakun;Sumet Heamawatanachai
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- force comparator machine;
- force transducer;
- interlaboratory comparison;
70.EFFECT OF DIFFERENT LOADING SCHEMES ON CREEP AND CREEP RECOVERY FOR FORCE MEASUREMENTS

机译：不同的加载方案对蠕变和蠕变恢复力测量的影响
- 作者：Ebtisam H. Hasan;Gunther Haucke;Rolf Kumme
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- creep;
- creep recovery;
- hysteresis;
- force transducer;
71.DYNAMIC CALIBRATION OF A FATIGUE TESTING MACHINE ON ORTHOPAEDIC IMPLANTS IN ACCORDANCE WITH THE ISO 4965-1

机译：根据ISO 4965-1对骨科植入物进行疲劳试验机的动态校准
- 作者：Rafael Spares de Oliveira;Renato Reis Machado;Andrew Knott;Ieda Vieira Caminha;Carlos Rodrigo Roesler
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- ISO 4965-1;
- dynamic force calibration;
- orthopaedic implant;
72.INFLUENCE OF SPECIFIC PARAMETERS ON A HAND-OPERATED TORQUE STANDARD MACHINE

机译：特定参数对手动扭矩标准机的影响
- 作者：Rafael S. Oliveira;Rodrigo F. Guilherme;Luiz C. Cabral
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- torque standards;
- hand-operated machines;
- torque calibration;
73.CALIBRATION AND APPLICATION OF A PRESSURE MAPPING SENSOR

机译：压力映射传感器的校准与应用
- 作者：Octavian Postolache;Pedro Silva Girdo
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- pressure mapping sensors;
- ballistocardiography;
- calibration;
74.NECESSITY OF RUSSIAN NANOINDENTATION STANDARD BASE DEVELOPMENT

机译：俄罗斯纳米命名标准基础开发的必要性
- 作者：Edward Aslanvan;Peter Krasowski
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- nanoindentation method;
- martens hardness;
- primary standard machine;
75.EFFECT OF TIME RELATED PARAMETERS ON ROCKWELL HARDNESS MEASUREMENT OF POLYMERS

机译：时间相关参数对聚合物洛氏硬度测量的影响
- 作者：Gunwoong Bahng;Nae Hyung Tak
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
76.TRACEABILITY OF INDUSTRIAL ROCKWELL, BRINELL, VICKERS AND KNOOP HARDNESS MEASUREMENTS

机译：工业洛氏，布氏，维氏和努氏硬度测量的可追溯性
- 作者：Samuel Low;Alessandro Germak;Konrad Herrmann
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- hardness;
- traceability;
- uncertainty;
77.PROTOTYPE OF LOAD CELL APPLICATION IN TORQE MEASUREMENT

机译：称重传感器在扭矩测量中的应用原型
- 作者：Tassanai Sanponpute;Chokchai Watthong
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- torque wrench calibrator;
- torque transfer wrench;
- load cell;
78.THE SET UP OF PRIMARY CALIBRATION SYSTEM FOR SHOCK ACCELERATION IN NML

机译：NML中冲击加速度的主要标定系统的建立
- 作者：Yu-Chuns Huans;Jiun-Kai Chen;Hsin-Chia Ho;Chung-Sheng Tu;Chao-Jung Chen
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- primary shock calibration system;
- airborne anvil;
79.THE MEASUREMENT OF LIQUID DENSITY BY COMPARISON BETWEEN AIR PRESSURES IN CMS

机译：用CMS中空气压力的比较测量液体密度
- 作者：Feng-yu Yang;Sheau-shi Pan;Horn-Haw Chen;Sheng-Jui Chen
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- u-type;
- laser interferometer;
- floating reflectors;
80.PERFORMANCE EVALUATION OF NIS NEW REFERENCE TORQUE STANDARD MACHINE

机译：NIS新参考扭矩标准机的性能评估
- 作者：K.M.Khaled;G.Aggag;A.EAbuelezz;M.G.Elsherbiny
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- torque machine;
- comparison;
- uncertainty;
81.IMPROVEMENT OF THE RELIZATION OF 500 KN FORCE BY DEADWEIGHT FORCE MACHINE AT NIMT

机译：NIMT的失重力机器实现500 KN力的改进
- 作者：Kittipone Chaemthet;Chanchai Amornsakul;Veera tulasombut;Sumet Heamawatanachai
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- deadweight force machine;
- DWM, Uncertainty;
82.UNCERTAINTY EVALUATION OF CHARPY IMPACT TESTING MACHINES

机译：纸样冲击试验机的不确定度评估
- 作者：Saher R. Gowda;A. Abu-Sinna. M. I. Mohamed;Moanes M. Mohamed;Ali E. Abuelezz
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- calibration;
- impact testers;
- uncertainty;
- direct method;
83.VIBRATION EFFECT ON VICKERS HARDNESS MEASUREMENT

机译：振动对维氏硬度测量的影响
- 作者：Tassanai Sanponpute;Apichaya Meesaplak
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- vibration effect;
- vickers hardness;
84.GEOMETRICAL MEASUREMENTS OF NIST SRM ROCKWELL HARDNESS DIAMOND INDENTERS

机译：NIST SRM洛氏硬度金刚石压痕的几何测量
- 作者：J. Sons;S. Low;A. Zheng;P. Gu
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- rockwell c hardness;
- rockwell diamond indenter;
- standard reference material;
85.CAPABILITIES OF THE LOAD AND PARTIAL UNLOAD TECHNIQUE

机译：装载和部分卸载技术的能力
- 作者：Tania Haas;Gottfried Bosch;Hans-Peter Vollmar
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- load and partial unload technique;
- elastic modulus;
- martens hardness;
86.CHARACTERISTIC QUALITY PARAMETERS OF MEASUREMENT VERIFICATION AND CALIBRATION OF MATERIAL TESTING MACHINES

机译：材料测试机的测量验证和校准的特征质量参数
- 作者：Dieter Schwenk;Andreas Subaric-Leitis
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- span;
- standard deviation;
- material testing machines;
87.ANALYSIS OF INDENTER GEOMETRY VERIFICATION DATA BY MEANS OF THE REGRESSION PLANE FITTING

机译：回归平面拟合的入口几何验证数据分析。
- 作者：Satoshi Takagi;Tatsuya Ishibashi
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- instrumented indentation;
- direct verification of indenter;
- atomic force microscope;
88.EVALUATION OF ACTUAL SENSITIVITY LIMIT IN A 10 Nm DEAD WEIGHT TORQUE STANDARD MACHINE AND STABILITY OF A NEW 1 Nm TORQUE TRANSDUCER

机译：10 Nm失重扭矩标准机实际灵敏度极限的评估和新型1 Nm扭矩传感器的稳定性
- 作者：Atsuhiro Nishino;Koji Ogushi;Kazunaga Ueda
- 会议名称：《21st conference on measurement of force, mass and torque together with HARDMEKO 2010 and 2nd meeting on vibration measurement》 | 2010年
- torque standard;
- uncertainty;
- sensitivity;