首页>外文会议>其他>42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada

42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.EFFECT OF THERMOMECHANICAL HISTORY ON THE HIGH TEMPERATURE MECHANICAL PROPERTIES OF A MICROALLOYED STEEL AND A LOW CARBON STEEL

机译：热力学历史对微合金钢和低碳钢高温力学性能的影响
- 作者：Siamak Akhlaghi;Farid Hassani;Steve Yue
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- hot ductility;
- microalloyed steel;
- low carbon steel;
- thermomechanical processing;
- isothermal hot ductility curve;
2.Effects of double zinc coating on steel sheets

机译：镀锌层对钢板的影响
- 作者：Hyun Tae Kim
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- zinc coating;
- sulfate bath;
- chloride bath;
- whiteness;
- brightness;
- preferred orientation;
3.Effect of V and N on Processing and Properties of HSLA Strip Steels Produced by Thin Slab Casting

机译：钒和氮对薄板坯连铸HSLA带钢工艺和性能的影响
- 作者：Robert J. Glodowski
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- HSLA;
- vanadium;
- nitrogen;
- thin slab cast strip;
- strain aging;
4.Mathematical Modelling of Hot Rolling of Steel Strip in Three Dimensions

机译：三维热轧带钢的数学建模
- 作者：M. Miyake;J. Too;I.V. Samarasekera
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
5.Effect of Pickling Inhibitors on Surface Properties of Steel Sheets

机译：酸洗抑制剂对钢板表面性能的影响
- 作者：Rhobum Park;Sug-Kyu Lee
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- hot-rolling;
- scale;
- pickling;
- hydrochloric acid;
- inhibitor;
- steel sheet;
6.Effect of Carbon and Niobium Content on HAZ Toughness of HT590 Steel

机译：碳，铌含量对HT590钢热影响区韧性的影响
- 作者：Hitoshi Furuya;Ryuji Uemori;Yukio Tomita;Shuji Aihara;Yukito Hagiwara
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- HT590 steel;
- HAZ toughness;
- carbon;
- niobium;
- martensitic island;
- heterogeneity;
7.Development of Rolling technique for Seamless Square Column

机译：无缝方柱轧制技术的发展
- 作者：Hideo Sato;Nobuhiko Morioka;Masaharu Kita;Takaaki Toyooka;Takuya Nagahama;Yoshitomi Onoda;Takuo Nagamachi
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- seamless pipe;
- hot rolling;
- sizing mill;
- square column;
8.Development of as-hot-rolled low-silicon and micro-alloyed dual-phase steels

机译：热轧低硅微合金双相钢的开发
- 作者：A. BODIN;J. FLEMMING;E.F.M. JANSEN
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- hot-rolled;
- high strength steels;
- dual-phase steels;
- automotive;
- laboratory research;
9.Development of High Carbon Wire Rod for Pre-Stressed Concrete Applications in TSSI

机译：TSSI预应力混凝土用高碳线材的开发
- 作者：Arun K. Mukherji;David Jones
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
10.BENCH MARKING AND VALIDATION OF MODELS USED FOR HOT STRIP MILL SIMULATION

机译：用于热轧机模拟的模型的基准测试和验证
- 作者：M.Phaniraj;S.Shamasundar;A.K.Lahiri
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- process modeling;
- hot strip mill;
- mechanical properties;
- microstructural evolution;
11.AN IMPROVED DRIVE SYSTEM FOR TUBE AND ROLL FORMING MILLS

机译：改进的用于管轧机的驱动系统
- 作者：Keith Sylvester Barraclough
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
12.Analysis of dynamic recrystallization in Nb microalloyed steels

机译：铌微合金钢的动态再结晶分析
- 作者：Guohui Zhu;Dianlong Tan;Mani Subramanian
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- dynamic recrystallization;
- niobium microalloyed steel;
- modeling plate and strip rolling;
- fine grain size;
13.The Mean and Local Wall Thickness Change in Tubes During Their Reducing and Sizing

机译：管材缩小和定径期间的平均壁厚和局部壁厚变化
- 作者：Gennady I.Gulyayev;Yury G.Gulyayev
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- reducing;
- sizing;
- deformation;
- roll pass;
- wall thickness, stand;
14.UKRAINIAN ESS LM HSS ROLLS FOR HOT STRIP MILLS

机译：乌克兰ESS LM HSS热轧带材轧辊
- 作者：B.I. Medovar;L.B. Medovar;A.V. Chernets;V.B. Shabanov;O.V. Sviridov
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- electroslag surfacing;
- liquid metal;
- current conductive mold;
- clad layer;
15.The Effects of Aluminum Nitride Precipitation on the Development of Toughness in 9313 Steel

机译：氮化铝沉淀对9313钢韧性发展的影响
- 作者：M. J. Leap;J. C. Wingert
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- impact toughness;
- aluminum nitride;
- tempered martensite;
- solidification;
- precipitate dissolution;
- precipitate coarsening;
16.ROLL BITE DEFORMATION OF THE THIN SCALE LAYER ON A PLAIN CARBON STEEL DURING HOT ROLLING

机译：热轧过程中普通碳素钢薄层的轧制咬合变形
- 作者：John B. Tiley;John G Lenard;Yangchun Yu
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- oxide scale;
- deformation;
- hot rolling;
- roll bite;
17.ON-LINE ACCURATE MEASUREMENT OF SEAMLESS TUBES

机译：在线准确测量无缝钢管
- 作者：A. Gluezmann
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- length measurement;
- tubes;
- laser velocimeter;
18.A Tribute to Paul E. Repas

机译：致敬保罗·E·餐
- 作者：Joseph D. Defilippi;Matthew J. Merwin
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
19.A REAPPRAISAL OF DUCTILE FRACTURE IN HIGH-STRENGTH STEELS

机译：高强度钢中韧性断裂的重新评估
- 作者：M. J. Leap;J. C. Wingert
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
20.A Study on the Edge Cracking of Low Carbon Steel Sheets Manufactured by Mini-Mill Process

机译：微型轧机生产低碳钢板边缘开裂的研究
- 作者：Jai-Hyun Kwak;Jin-Hwan Chung;K.Mox Cho
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- edge cracking;
- mini-mill process;
- low carbon steel;
- Mn/S ratio;
- precipitation;
- MnS;
21.MICROSTRUCTURE, MECHANICAL PROPERTIES AND WEAR RESISTANCE OF HIGH SPEED STEEL ROLLS FOR HOT ROLLING MILLS

机译：高速轧制用高速钢的组织，力学性能和耐磨性
- 作者：Miguel Angelo de Carvalho;Renato Rufino Xavier;Celso da Suva Pontes Filho;Carlos Morone;Mario Bocallini;Amilton Sinatora
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- rolls;
- high-speed steels;
- hot rolling;
22.Mode II Crack Growth Analysis of Spalling Behavior for Strip Mill Backup Roll

机译：带钢备用辊剥落行为的II型裂纹扩展分析
- 作者：Yoshihiro Ohkomori;Chu Sakae;Yukitaka Murakami
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
23.Modeling Hot Bar Rolling to Predict Surface Quality

机译：建模热轧以预测表面质量
- 作者：E. Buddy Damm;Praveen Pauskar;Jeffery Ives;Krich Sawamiphakdi;Mark Conneely
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- surface quality;
- recrystallization;
- grain growth;
- flow stress;
- high temperature fracture;
- damage criteria;
- modeling;
24.Martensite Determination in Multiphase Steels Using Neutron Diffraction

机译：中子衍射法测定多相钢中的马氏体
- 作者：Roberto Filippone;John Root;Steve Yue
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- martensite;
- neutron diffraction;
- dual-phase steels;
- TRIP steels;
- ferrite;
- peak broadening;
25.Influence of Microstructure on Secondary Cold Work Embrittlement of IF Steels

机译：显微组织对IF钢二次冷作脆化的影响
- 作者：P. Martin;S. Dionne;O. Dremailova;J. Brown;B. Voyzelle;J. Bowker;D. Linkletter
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
26.INFLUENCE OF SILICON ON THE KINETICS OF METADYNAMIC RECRYSTALLIZATION IN MICROALLOYED HIGH CARBON STEELS

机译：硅对微合金化高碳钢中瞬态再结晶动力学的影响
- 作者：A. M. Elwazri;P. Wanjara;S. Yue
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
27.IMPROVEMENT OF THE WORK ROLL PERFORMANCE ON 2050 mm HOT STRIP MILL A TISCOR VANDERBULPARK

机译：TISCOR VANDERBULPARK在2050毫米热轧带钢上的轧辊性能改进
- 作者：R.J. Skoczynski;G. Walmag;J.P. Breyer
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
28.Hot Ductility Behavior of Seamless Steel Pipes with Peritectic Carbon Content and Microalloyed Additions

机译：具有包晶碳含量和微合金添加剂的无缝钢管的热延性
- 作者：Hugo Solis Tovar;Eduardo Guzman Rojas;J. Angel Carranza Ochoa;C. Isaac Garcia
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
29.HOT DEFORMATION OF LOW CARBON STEEL IN THE METASTABLE AUSTENITE REGION

机译：亚稳态奥氏体区低碳钢的热变形
- 作者：Elisa Alonso;Farid Hassani;Steve Yue
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- dual phase steel;
- metastable austenite;
- fine grains;
- plain carbon steel;
30.High Strength, Thin Gauge Strip By Heavy Ferritic Rolling Of Low Carbon Steels

机译：低碳钢重铁素体轧制的高强度薄规格钢带
- 作者：R. M. Smith
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- steel;
- ferritic rolling;
- recovery annealing;
- subgrain structure;
31.GALVANNEALING BEHAVIOR AND COATING PERFORMANCE OF Ti-IF AND Nb-Ti-IF STEELS

机译：Ti-IF和Nb-Ti-IF钢的镀锌行为和涂层性能
- 作者：Chann C. Cheng
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- galvanneal coating;
- Ti-IF;
- Nb-Ti-IF;
- hot dip simulator;
- structure;
- double olsen test;
32.RECIPROCAL EFFECTS OF ROLL SURFACE CONDITIONS AND WORKING TEMPERATURE ON THE NUMERICAL COMPUTATION OF ROLLING FORCE OF HSLA STEEL

机译：轧制表面条件和工作温度对HSLA钢轧制力数值计算的相互影响
- 作者：Taher Ahmed El-Bitar
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- numerical modeling;
- hot rolling;
- friction;
- working temperature;
- rolling force;
- HSLA steel;
33.QUESTIONS, ANSWERS, MORE QUESTIONS Twenty - five Years of Experience in Discussing Rolls and Rolling Technology

机译：问题，答案，更多问题二十五年的轧辊和轧制技术讨论经验
- 作者：Karl Heinrich Schroeder
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- rolls;
- mechanical properties of rolls;
- coefficient of friction;
- quality assurance;
34.PHASE TRANSFORAMTION DURING ANNEALING OF A COLD-ROLLED DUAL PHASE STEEL GRADE

机译：冷轧双相钢退火过程中的相变
- 作者：A. Pichler;S. Traint;G. Arnoldner;E. Werner;R. Pippan;P. Stiaszny
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- DP grades;
- intercritical annealing;
- phase transformation;
- bainite;
- martensite;
- mechanical properties;
35.PRECIPITATION HARDENING OF COPPER-CONTAINING IF STEELS

机译：含铜IF钢的沉淀硬化
- 作者：Jeremy Frimer;Duncan Meade;Matthias Militzer;Warren Poole
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- interstitial-free steel;
- copper precipitation;
- ageing;
- recrystallization;
36.THE WEAR OF TOOL STEEL ROLLS DURING HOT ROLLING OF LOW CARBON STEELS

机译：低碳钢热轧过程中工具钢的磨损
- 作者：J.J. Fitzpatrick;J.G. Lenard
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- wear;
- tool steel;
- rolls;
- hot rolling;
37.Thermal Desorption of Hydrogen from 4340 Steel

机译：4340钢中氢气的热脱附
- 作者：Peter Ganeff;Robert Foley
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- thermal desorption spectroscopy;
- hydrogen embrittlement;
- hydrogen detection;
- 4340 steel;
- microstructural traps;
38.INFLUENCE OF THE ROLL BITE CONDITIONS ON THE SURFACE QUALITY OF HOT ROLLED COIL

机译：轧制工况对热轧卷表面质量的影响
- 作者：Frederic GEFFRAYE;Vincenzo LANTERI;Pascal GRATACOS;Sabine DAUPHIN
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- hot rolling;
- roll surface degradation;
- surface quality;
- friction;
- finite element modeling;
39.Hot Profile Ring Forming

机译：热成型环成型
- 作者：James A. Laverick;Kevin P. Daiger;Kevin A. Raketich
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- forming;
- bearings;
- forgings;
- profile forming;
40.GRAIN REFINEMENT BY DANYMIC RECRYSTALLIZATION DURING WARM DEFORMATION IN (γ +α) REGION OF LOW CARBON MICROALLOYED STEELS

机译：低碳微合金钢（γ+α）区热变形过程中的动态再结晶细化晶粒
- 作者：Huoran HOU;Huai GAO;Qingyou LIU;Han DONG;Yuqing WENG
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- grain refinement;
- dynamic recrystallization;
- warm deformation;
- microalloyed steel;
41.FORMATION OF ULTRA-FINE FERRITE GRAINS IN COMMON CARBON STEELS THROUGH LOW TEMPERATURE HEAVY DEFORMATION

机译：低温重变形下普通碳钢中超细铁素体晶粒的形成
- 作者：Zhongmin YANG;Yan ZHAO;Qian CHEN;Huai GAO;Ruizheng WANG;Yanwen MA
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- plain carbon steel;
- ultra-fine grains;
- deformation induced ferrite;
- dynamic recrystallization;
42.CORRELATION OF ROLLED-IN DEFECTS IN IF STEEL AND THE THERMAL FATIGUE PROPERTIES OF THE HOT STRIP MILL WORK ROLLS

机译：钢中轧制缺陷与热轧带钢轧制热疲劳性能的关系
- 作者：Jae-Hwa Ryu;Han-Bin Ryu
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- rolled-in defect;
- IF steel;
- hot strip work roll;
- thermal fatigue;
43.Physical and Mathematical Simulation of Phase Transformation during Accelerated Cooling of Eutectoid Steel Rods

机译：共析钢棒加速冷却过程中相变的物理和数学模拟
- 作者：Roman Kuziak;Maciej Pietrzyk
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- physical modeling;
- mathematical modeling;
- finite-element method;
- rods;
- eutectoid steel;
- phase transformation;
- air-cooling;
- accelerated cooling;
- mechanical properties;
44.SCHEDULING OF ROLLS FOR PRODUCTION CAMPAIGNS IN BOTH COLD MILLS AND HOT MILLS

机译：在冷轧机和热轧机中安排生产活动的数量
- 作者：Khalil Fazlollahi;Tony D Antonio;Guy Pilon;Hooman Fazlollahi
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
45.Role of Structure and Microstructure in the Enhancement of Strength and Fracture Resistance of Ultra-High Strength Hot Rolled Steels

机译：组织和微观结构在提高超高强度热轧钢强度和抗断裂性中的作用
- 作者：R.D.K. Misra;G.C. Weatherly;I.E. Hartmann;A.J. Boucek
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- hot rolled steels;
- yield strength;
- toughness;
- ferrite-bainite microstructure;
46.TECHNOLOGY ENHANCED WORK ROLLS FOR THE ROUGHING MILL APPLICATION

机译：适用于粗磨应用的技术增强的工作流程
- 作者：Lewis J. Prenni;Jim McGregor
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
47.PRECIPITATION AND REHEAT CRACKING SUSCEPTIBILITY OF A514-TYPE STEELS CONTAINING SULFUR AND BORON

机译：含硫和硼的A514型钢的析出和再热裂纹敏感性
- 作者：C. Huang;J. S. Keske;D. K. Matlock
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- reheat cracking;
- boron partition;
- cementite;
- precipitation;
- fracture;
48.STENGTHENING MECHANISM IN DUAL-PHASE ACICULAR FERRITE + M/A MICROSTRUCTURES

机译：双相铁素体+ AM / A微结构的强化机理
- 作者：I.A. Yakubtsov;J.D. Boyd;W.J. Liu;E. Essadiqi
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- strengthening mechanisms;
- bainite;
- acicular ferrite;
- M/A constituent;
- precipitates;
- dislocations;
- grain boundaries;
49.WETTING OF ZINC ALLOYS ON STEELS CONTAINING SILICON

机译：锌合金在含硅钢上的润湿
- 作者：Yongsug Chung;Matthew X. Yao;Jian Wang;James M. Toguri
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- galvanizing process;
- silicon-bearing steel;
- surface tension;
- contact angle;
- work of adhesion;
50.ULTRA FINE GRAIN STEELS AND THEIR PROPERTIES

机译：超细晶粒钢及其性能
- 作者：Yuqing WENG;Han DONG
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- new generation steels;
- plain low carbon steel;
- high strength low alloy steel;
- structural alloy steel;
- ultra fine grain;
- processing;
- property;
51.Effect of Chromate on the Corrosion and Fuel Resistance of Resin Coated Steel Sheets for Automobile Fuel Tank

机译：铬酸盐对汽车油箱用树脂涂层钢板耐蚀性和耐燃料性的影响
- 作者：Soohyoun Cho;Jaeryung Lee;Sangkeol Noh
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- corrosion resistance;
- fuel resistance;
- fuel tank;
- chromate;
- thermal stability;
- resin;
52.Effect of Deformation Schedule on the Microstructure and Mechanical Properties of Thermomechanically Processed C-Mn-Si TRIP Steel

机译：变形规律对热机械加工C-Mn-Si TRIP钢组织和力学性能的影响
- 作者：I.B. Timokhina;P.D. Hodgson;E.V. Pereloma
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
53.DEVELOPMENT OF ULTRAFINE GRAIN STEELS USING THE MAXSTRAIN~(~R) DEFORMATION SIMULATOR

机译：用MAXSTRAIN〜（〜R）变形模拟器开发超细晶粒钢
- 作者：Wayne C. Chen;David E. Ferguson;Hugo S. Ferguson
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- ultrafme grain steel;
- thermomechanical processing;
- multi-axis maxstrain technology;
54.DEFORMATION TEMPERATURE AND THE EVOLUTION OF AUSTENITE GRAINS IN NIOBIUM STEELS

机译：铌钢的变形温度和奥氏体晶粒的演变
- 作者：Khaled F. Al-Hajeri;Tariq Mehmood
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- deformation temperature;
- grain refinement;
- niobium steels;
- austenite grain growth;
55.CARBON DISTRIBUTION BETWEEN MATRIX, GRAIN BOUNDARIES AND DISLOCATIONS IN ULTRA LOW CARBON BAKE HARDENABLE STEELS

机译：超低碳可烘烤钢中基体，晶粒边界和位错之间的碳分布
- 作者：A. K. De;B. Soenen;B. C. De Cooman;S. Vandeputte
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- strain aging;
- dislocations;
- segregation;
- internal friction;
- ULC BH steel;
56.Cleavage Fracture Stress of Plain Carbon Fully Pearlitic Steel Bars

机译：素碳全珠光体钢筋的劈裂断裂应力
- 作者：G. M. Michal;T. D. Nixon
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- cleavage fracture stress;
- pearlite;
- lamellar spacing;
- notched bend bar specimen;
- heat treatment;
57.BAKE-HARDENABILITY AND AGING RESISTANCE OF HIGH-STRENGTH NITRIDED SHEET STEELS

机译：高强度氮化钢板的烘烤硬度和耐老化性
- 作者：Brandon M. Hance
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- high-strength steel;
- nitrided steel;
- bake-hardenability;
- aging resistance;
58.APPLICATION OF ESR TECHNOLOGY TO THE MANUFACTURING OF BIMETALLIC HSS ROLLS FOR COLD AND HOT STRIP MILLS

机译：ESR技术在冷热带钢双金属HSS轧制工艺中的应用。
- 作者：C. Gaspard;S. Bataille;D. Batazzi;P. Thonus
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- ESR cladding;
- HSS grades;
- bimetallic rolls;
59.An Investigation of Precipitation Reactions in 12Cr / 12Co / 5Mo Nickel Modified Martensitic Precipitation Strengthened Stainless Steel

机译：12Cr / 12Co / 5Mo镍改性马氏体沉淀强化不锈钢中沉淀反应的研究。
- 作者：Aytekin Hitit;Warren M. Garrison
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- martensitic;
- stainless steel;
- precipitation strengthening;
- retained austenite;
- reverted austenite;
- R-phase;
- ?phase;
60.An Integrated Model for Microstructural Evolution and its Application to the Properties Predictions of Plate Steels

机译：微观组织演化综合模型及其在钢板性能预测中的应用
- 作者：Se Don Choo;Wung Yong Choo
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- phase transformation;
- metallurgical modeling;
- mechanical properties;
- plate steels;
61.AN ANALYSIS OF TENSILE DEFORMATION BEHAVIOR AND MICROSTRUCTURAL EVOLUTION IN AN ARTIFICIALLY BANDED SAE 5140

机译：人工束缚SAE 5140的拉伸变形行为和微观结构演变分析
- 作者：Ted F. Majka;David K. Matlock;George Krauss;Mark T. Lusk
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- banding;
- steel;
- tensile properties;
- hardenability;
- SAE 5140;
62.The Centrifugal Casting of HSS Roll for Narrow Strip and Rod Mills

机译：窄带钢和棒材轧机用高速钢轧辊的离心铸造
- 作者：Zhang Xin
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
63.ULTRAFINE FERRITE PRODUCTION BY STRAIN-INDUCED TRANSFORMATION

机译：应变诱发的超细铁素体生产
- 作者：G.L. Kelly;P.D. Hodgson
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
64.The Effect of Electro-Slag Remelting (ESR) Process on the Forgeability Characteristics of DIN 17350 (AISI L6) Tool Steel

机译：电渣重熔（ESR）工艺对DIN 17350（AISI L6）工具钢可锻性的影响
- 作者：Ali M. Shahhosseini;Mohammad H. Shahhosseini;Ali Aghamohammadi
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- radial forging;
- electro-slag remelting;
- tool steel;
65.A Mechanism for Generating Aluminum Debris in the Roll Bite and Its Partitioning between the Surface of the Work Roll and the Surface of the Sheet as Smudge

机译：轧辊咬合中产生铝屑的机制及其在工作辊表面和薄板表面之间的分配（作为污点）
- 作者：RONALD A. REICH;JUNE M. EPP;DAVTD E. GANTZER
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- aluminum industry tribology;
- rolling;
- wear and failure;
66.A PRECIPITATION MODEL FOR PREDICTING HOT DUCTILITY BEHAVIOUR IN MICROALLOYED STEELS

机译：预测微合金钢热延性行为的沉淀模型
- 作者：Kevin Mark BANKS;Alan Paul BENTLEY;Andreas KOURSARIS
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- carbonitride precipitation;
- modelling;
- hot ductility;
- Nb steels;
- V-Nb steels;
67.A Systems Approach to Simultaneous Design of Roll Passes and Microstructure in Bar Rolling

机译：棒材轧制道次和组织的同时设计的系统方法
- 作者：Satish Kini;Rajiv Shivpuri
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- bar rolling;
- roll pass design;
- microstructural evolution;
- FEM simulation;
- optimization;
68.INVESTIGATION OF THE SECONDARY WORK EMBRITTLEMENT OF IF-STEELS

机译：IF钢二次加工的研究
- 作者：A. Spalek;G. Reisner;E.A. Werner;A. Pichler;P. Stiaszny
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- IF-sheet steel;
- secondary work embrittlement;
- drop weight test;
- crucial test-parameters;
69.Internal-Friction Measurements of Ultra-Low Carbon Sheet Steels

机译：超低碳薄钢板的内摩擦测量
- 作者：Waleed Al Shalfan;John G. Speer;David K. Matlock;Sudook Kim;Hassell Ledbetter
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- internal-friction;
- ultra low carbon bake hardenable steels;
- AKDQ and IF sheets;
70.Metallurgical Review of Processes for Obtaining Strength and r-value in Galvannealed Sheet Steels

机译：镀锌钢板强度和r值获得过程的冶金学评论
- 作者：Robert P. Foley;David K. Matlock;George Krauss
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- review;
- strengthening mechanisms;
- r-value;
- galvannealed sheet steel;
- ultra-low carbon steels;
- interstitial free steels;
71.MICROSTRUCTURE EVOLUTION OF A STATE-OF-THE-ART Ti-Nb HSLA STEEL

机译：先进的Ti-Nb HSLA钢的组织演变
- 作者：Naoki Nakata;Matthias Militzer
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- microstructure;
- continuous cooling;
- ferrite;
- grain size;
- transformation;
- modelling;
72.MICROSTRUCTURAL STUDY OF GRADE 100 STEEL

机译：100级钢的微观结构研究
- 作者：Siamak Akhlaghi;Douglas G. Ivey;Laurie Collins
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- microalloyed steel;
- bainitic ferrite;
- allotriomorphic ferrite;
- (Ti,Nb)(CN) precipitates;
73.MICROSTRUCTURE-PROPERTY RELATIONSHIPS IN THERMOMECHANICALLY PROCESSED FORCINGS

机译：热机械加工力中的微观结构-性能关系
- 作者：J.D. Boyd;P. Zhao
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- thermomechanical processing;
- microalloyed forgings;
- microstructure-property relationships;
74.Machinability of Bi-S and Pb-S-treated Free-Machining Steels

机译：Bi-S和Pb-S处理的自由加工钢的切削加工性
- 作者：Samkyu Cho;Youngmoon Lee
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- bismuth-treated free-machining steel;
- tool wear;
- chip;
- cutting energy;
- cutting force;
- chip-breaking cycle time;
- surface roughness;
75.EXAMINATION OF FULLY BAINITIC STRUCTURES IN TRIP STEELS

机译：行程钢中完全贝氏体结构的检查
- 作者：M. Bouet;R. Fillipone;E. Essadiqi;J. Root;S. Yue
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- TRIP steel;
- retained austenite;
- martensite;
- bainite;
- intercritical deformation;
- hot deformation;
76.Influence of Batch Annealing Soak Temperature on the Structure and Properties of Fully Stabilized and High Strength, Fully Stabilized Steels

机译：分批退火均热温度对全稳定高强度高稳定钢的组织和性能的影响
- 作者：D. P. Hoydick
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- fully stabilized steels;
- high strength fully stabilized steels;
- batch annealing;
- mechanical properties;
- abnormal grain growth;
- r_m-value;
- n-value;
77.INFLUENCE OF MANGANESE, SILICON AND ALUMINIUM ON THE TRANSFORMATION BEHAVIOR OF LOW ALLOYED TRIP-STEELS

机译：锰，硅和铝对低合金TRIP钢相变行为的影响
- 作者：S. Traint;A. Pichler;R.Tikal;P. Stiaszny;E.A. Werner
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年
- low alloyed TRIP-steels;
- retained austenite;
- microstructure;
- mechanical properties;
- influence of the annealing parameters;
78.INFLUENCE OF PRECIPITATES IN IF STEEL ON GALVANNEAL COATINGS STRUCTURE

机译：IF钢中的析出物对镓涂层结构的影响
- 作者：Yoshio Shindo
- 会议名称：《42nd Mechanical Working and Steel Processing Conference, 42nd, Oct 22-25, 2000, Toronto, Ontario, Canada》 | 2000年