首页>外文会议>IEEE International Conference on Advanced Manufacturing

IEEE International Conference on Advanced Manufacturing

召开年：2018
召开地：Yunlin(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.The User Research of Interactive APP Design for 2016 Yilan Green Expo Food-Ethics Museum

机译：2016宜兰绿色博览会食品伦理博物馆互动APP设计用户研究
- 作者：Yu-Shing Chang;Yi-Chou Tsai;Tsun-Hsien Wang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Education;
- Safety;
- Agriculture;
- Ethics;
- Media;
- Smart phones;
- Technological innovation;
2.Material Optimization Method in 3D Printing

机译：3D打印中的材料优化方法
- 作者：Md. Hazrat Ali;GazizYerbolat;ShynggysAmangeldi
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Optimization;
- Three-dimensional displays;
- Three-dimensional printing;
- Plastics;
- Printers;
- Strain;
3.A Novel Method in the Diagnosis of the Assembly Conditions of Gears

机译：齿轮装配状态诊断的新方法
- 作者：Shinn-Liang Chang;Pei-Yu Chang;Zong-Hua Yang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gears;
- Neural networks;
- Signal processing;
- Empirical mode decomposition;
- Fault diagnosis;
- Wavelet analysis;
4.Preparation of TiO

机译：TiO的制备
- 作者：Jyun-Jia Wang;Bao-Wen Wang;Tian-Chiuan Wu;Jenn-Kai Tsai;Teen-Hang Meen
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Photovoltaic cells;
- Coatings;
- Graphene;
- Slurries;
- Charge carrier processes;
- Electrodes;
- Spontaneous emission;
5.State of Charge Estimation for Lithium-ion Battery using Recurrent Neural Network

机译：基于递归神经网络的锂离子电池充电状态估计
- 作者：Van-Tsai Liu;Yi-Kai Sun;Hong-Yi Lu;Sun-Kai Wang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- State of charge;
- Estimation;
- Resistance;
- Discharges (electric);
- Electrical resistance measurement;
- Lithium-ion batteries;
6.A Measurement System for the Performance Evaluation of Roots Blowers

机译：罗茨鼓风机性能评估的测量系统
- 作者：Rong-Yuan Jou;Wen-Hsin Huang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Temperature measurement;
- Testing;
- Meters;
- Torque;
- Torque measurement;
- Pressure measurement;
- Standards;
7.Composite Materials Property Determination by Rule of Mixture and Monte Carlo Simulation

机译：混合规则和蒙特卡洛模拟确定复合材料的性能
- 作者：Gaziz Yerbolat;Shynggys Amangeldi;Md. Hazrat Ali;Nazym Badanova;Asset Ashirbeok;Gulzhahan Islam
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Mechanical factors;
- Monte Carlo methods;
- Composite materials;
- Three-dimensional printing;
- Material properties;
- Finite element analysis;
- Matlab;
8.3D Scanning System of Structured Light for Aiding Workpiece Position of CNC Machine Tool

机译：结构光的3D扫描系统辅助数控机床的工件定位
- 作者：Wen-Yang Chang;Jia-Wei Hsu;Bo-Yao Hsu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Three-dimensional displays;
- Cameras;
- Machine tools;
- Solid modeling;
- Mathematical model;
- Image edge detection;
- Reflective binary codes;
9.An Empirical study on planning and design collaboration of urban railway construction bridge and culvert project based on BIM

机译：基于BIM的城市铁路建设桥涵规划与设计合作的实证研究。
- 作者：Chih-ming Wu;Chui-te Chiu;Jin-fa Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Bridges;
- Collaboration;
- Solid modeling;
- Rail transportation;
- Planning;
- Libraries;
- Filling;
10.Optimization of cooling conditions and cutting parameters during hard milling of AISI H13 steel by using Taguchi method

机译：Taguchi法优化AISI H13钢硬铣削过程中的冷却条件和切削参数
- 作者：The-Vinh Do;Ngoc-Chien Vu;Quoc-Manh Nguyen
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Cooling;
- Rough surfaces;
- Surface roughness;
- Feeds;
- Machining;
- Signal to noise ratio;
- Lubricants;
11.FIS-based Domestic Milling Machine PHM System Considering Multi-speed Frequency Variation

机译：考虑多速变频的基于FIS的家用铣床PHM系统
- 作者：Shang-Chih Lin;Chuan-Hsiang Su;Yu Tsao;Shun-Feng Su;Hong-Yuan Mark Liao;Yennun Huang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Prognostics and health management;
- Data visualization;
- Milling machines;
- Frequency-domain analysis;
- Feature extraction;
- Manufacturing;
12.Study on the Efficiency of Automatic Matching for Various Aerial Survey Marks

机译：各种航测标记自动匹配效率的研究
- 作者：Hung-Lin Lin;Chien-Lun Huang;Zhi-Yuan Huang;Shun-Jie Jhang;Liang-Ting Wu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Image processing;
- Photography;
- Cameras;
- Conferences;
- Manufacturing;
- Software;
- Image matching;
13.Comparison of Horizontal Precision of Various Aerial Survey Marks in Orthophoto Production

机译：正射影像制作中各种航测标记水平精度的比较
- 作者：Hung-Lin Lin;Hsin-Yi Lee;Hung-I Huang;Kuo-Hsiang Tseng;Yi-Chan Tsai
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Image processing;
- Conferences;
- Manufacturing;
- Software;
- Photography;
- Cameras;
- Mathematical model;
14.Comparison the Plane Precision of UAS Aerial Survey Between Image Processing and GNSS Measuring Data

机译：在图像处理和GNSS测量数据之间比较UAS航测的平面精度
- 作者：Tsung-Yi Lin;Jung-Fa Wang;Hung-Lin Lin;Cheng-Tsung Lee
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Coordinate measuring machines;
- Measurement uncertainty;
- Cameras;
- Measurement errors;
- Image resolution;
- Mathematical model;
15.Study on the dormitory public facilities management using BIM

机译：基于BIM的宿舍公共设施管理研究。
- 作者：Tsung-Yi Lin;Hsin-Yi Shih;Jia-Chang Huang;Yu-Lien Hou;Yun Yin Chiu;Yi-Xiu Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Maintenance engineering;
- Solid modeling;
- Software;
- Data models;
- Google;
- Buildings;
- Conferences;
16.Optimized Parameters on Enhanced Precision of Image Matching in UAS Photogrammetry

机译：UAS摄影测量中提高图像匹配精度的优化参数
- 作者：Hung-Lin Lin;Yu-Tuan Chou;Shao-Yi Hsia
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Cameras;
- Three-dimensional displays;
- Image processing;
- Solid modeling;
- Software;
- Data models;
- Coordinate measuring machines;
17.Integrating BIM and IoT technology in environmental planning and protection of urban utility tunnel construction

机译：将BIM和IoT技术整合到环境规划和城市公用事业隧道建设的保护中
- 作者：Chih-ming Wu;Hsin-lung Liu;Long-mao Huang;Jin-fa Lin;Ming-wei Hsu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Monitoring;
- Internet of Things;
- Real-time systems;
- Planning;
- Buildings;
- Solid modeling;
- Data models;
18.Development of Intelligent Tourism Information System Based On Virtual Reality

机译：基于虚拟现实的智能旅游信息系统开发
- 作者：Juin-Ling Tseng;Yan-Yi Jiang;Sheng-Jun Peng;Hsiao-En Wei
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Three-dimensional displays;
- Virtual reality;
- Information systems;
- Cultural differences;
- Conferences;
- Solid modeling;
- Cameras;
19.Improvement of Surface Roughness in Electrical Discharge Machining by Using Ultrasonic Auxiliary Electrode

机译：使用超声波辅助电极改善放电加工中的表面粗糙度
- 作者：Shao-Yi Hsia
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Discharges (electric);
- Machining;
- Surface discharges;
- Electrodes;
- Rough surfaces;
- Surface roughness;
- Acoustics;
20.Using a Cone Frustum Part in the Evaluation of Multiple Types of Five-Axis Machine Tools with the Taguchi Method

机译：Taguchi法在多种类型的五轴机床评估中使用锥形截锥体零件
- 作者：Han-Jui Chang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Machine tools;
- Milling;
- Performance evaluation;
- Tools;
- Conferences;
21.The implementation of a smart microchips system to applications on the modern medical applications

机译：在现代医疗应用中将智能微芯片系统实现到应用
- 作者：Yue-Lin Hsieh;Yi-Chern Hsieh;Chih-Chieh Huang;Zhao Han
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Medical services;
- Wireless sensor networks;
- Monitoring;
- Medical diagnostic imaging;
- Sensors;
- Integrated circuits;
- Biomedical monitoring;
22.Fabrication of a polymeric optical filter based on an asymmetric Bragg coupler with liquid crystal

机译：基于具有液晶的不对称布拉格耦合器的聚合物滤光片的制造
- 作者：Yu-Wen Luo;Li-Ling Chu;You-Rang Chen;Wei-Ching Chuang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Optical filters;
- Optical device fabrication;
- Integrated optics;
- Polymers;
- Couplers;
- Optical fibers;
23.A Design of Wearable Goniometers for Measuring Carpal Angular Movement

机译：用于测量腕关节角向运动的可穿戴式测角仪的设计
- 作者：Shih-Miao Huang;Pei-Yu Gi;Pei-Ying Wu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gyroscopes;
- Sensitivity;
- Mathematical model;
- Goniometers;
- Wrist;
- Sensors;
- Cameras;
24.Method for Concept Design; NT Extrapolation

机译：概念设计方法； NT外推
- 作者：Eduardo Martinez Escobedo
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Extrapolation;
- Technological innovation;
- Project management;
- Manufacturing;
- Creativity;
- Art;
25.Empirical Modelling of Cutting Force Components in Turning

机译：车削切削力分量的经验建模
- 作者：Ryabov Oleg;Seisuke Kano;Hiroyuki Sawada;Jonny Herwan
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Force;
- Steel;
- Tools;
- Turning;
- Feeds;
- Nose;
26.Analysis and Fabrication of Periodic Graphene-like Structures with Zinc Oxide Piezoelectric Material

机译：氧化锌压电材料周期石墨烯状结构的分析与制备
- 作者：Zi-Gui Huang;Shen-Hsien Hu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Films;
- Zinc oxide;
- Electrodes;
- Photonic band gap;
- Frequency measurement;
- Graphene;
27.Mouse operation data collection automation system using ESP32 and AppInventer

机译：使用ESP32和App Inventor的鼠标操作数据收集自动化系统
- 作者：Yu-Xiang Zheng;Ming-Chung Tang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Mice;
- Smart phones;
- Databases;
- Medical services;
- Monitoring;
- Software;
- Conferences;
28.Development of a fiber-laser-based frequency comb for precision dimensional metrology

机译：基于光纤激光的频率梳的精密尺寸测量
- 作者：Yuri KANDA;Hiraku MATSUKUMA;Shaoqing YANG;Yuki SHIMIZU;Hajime INABA;Wei GAO
- 会议名称：《》 | 2018年
29.A Digital Evaluation System for Inclusions in Steel

机译：钢中夹杂物的数字化评估系统
- 作者：Chia-Sui Wang;Wesley Huang;Mark Yeh;Jou-Wei Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Manuals;
- Image color analysis;
- Decision making;
- Shape;
- Steel;
- Inspection;
- Standards;
30.Theoretical calculation of the reading output from a micro thermal sensors for precision positioning

机译：用于精确定位的微型热传感器的读数输出的理论计算
- 作者：Yuki Shimizu;Ayaka Ishida;Hiraku Matsukuma;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gratings;
- Heating systems;
- Temperature sensors;
- Sensor systems;
31.Angle measurement using a diffraction of optical frequency comb

机译：使用光学频率梳衍射测量角度
- 作者：Kazuki Nakamura;Hiraku Matsukuma;Yuki Shimizu;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Measurement by laser beam;
- Laser beams;
- Optical fibers;
- Diffraction gratings;
- Optical reflection;
- Ultrafast optics;
32.Theoretical calculation of the reading output from a micro thermal sensors for precision positioning

机译：微热传感器读取输出的理论计算精密定位
- 作者：Yuki Shimizu;Ayaka Ishida;Hiraku Matsukuma;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gratings;
- Heating systems;
- Temperature sensors;
- Sensor systems;
33.An ultra-sensitive optical angle sensor for pitch deviation measurement of diffraction gratings

机译：None
- 作者：Lue Quan;Hiraku Matsukuma;Xiuguo Chen;Yuki Shimizu;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gratings;
- Diffraction;
- Diffraction gratings;
- Adaptive optics;
- Optical sensors;
- Displacement measurement;
- Mathematical model;
34.Development of a fiber-laser-based frequency comb for precision dimensional metrology

机译：用于精密尺寸计量纤维激光的频率梳式的研制
- 作者：Yuri KANDA;Hiraku MATSUKUMA;Shaoqing YANG;Yuki SHIMIZU;Hajime INABA;Wei GAO
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
35.Robust the ESD Reliability by Drain-side Super-junctions for the UHV Circular nLDMOS

机译：通过用于UHV圆形NLDMOS的漏极侧超接线来强大的ESD可靠性
- 作者：Shen-Li Chen;Pei-Lin Wu;Yu-Lin Jhou;Po-Lin Lin;Sheng-Kai Fan
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Electrostatic discharges;
- Reliability;
- Layout;
- Testing;
- Logic gates;
- Modulation;
- Pins;
36.A compact two-axis Lloyd’s mirror interferometer for scale grating fabrication

机译：用于刻度制造的紧凑型双轴LLOYD镜干涉仪
- 作者：Masanori MATSUNAGA;Kazuki MANO;Hiraku MATSUKUMA;Yuki SHIMIZU;Wei GAO
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Optical interferometry;
- Laser beams;
- Mirrors;
- Optical device fabrication;
- Diffraction gratings;
- Optical polarization;
- Gratings;
37.Method for Concept Design; NT Extrapolation

机译：概念设计方法; NT推断
- 作者：Eduardo Martinez Escobedo
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Extrapolation;
- Technological innovation;
- Project management;
- Manufacturing;
- Creativity;
- Art;
38.Design and Fabrication of Innovative Optical Head for Picosecond Laser Machining Applied on LED Sapphire Subtract Ablation

机译：用于PICOSECOND激光加工创新光学头的设计与制作LED蓝宝石减去消融
- 作者：Chia-Ming Jan;Chou Chen-Bin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Laser beams;
- Laser ablation;
- Integrated optics;
- Substrates;
- Laser beam cutting;
- Optical device fabrication;
- Machining;
39.Preparation of TiO2/Single Layer Grapgene Composite Photoanodes for Dye-Sensitized Solar Cells

机译：用于染料敏化太阳能电池的TiO 2 /单层葡萄葡萄合复合光电码
- 作者：Jyun-Jia Wang;Bao-Wen Wang;Tian-Chiuan Wu;Jenn-Kai Tsai;Teen-Hang Meen
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Photovoltaic cells;
- Coatings;
- Graphene;
- Slurries;
- Charge carrier processes;
- Electrodes;
- Spontaneous emission;
40.Development of the half-angle divergence metrology applied to the inner-layer exposure facility for PCB industry

机译：开发应用于PCB行业内层曝光设施的半角分歧计量
- 作者：Chia-Ming Jan;Cheng-Bang Huo
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Integrated optics;
- Optical sensors;
- Metrology;
- Manufacturing;
- Adaptive optics;
- Optical design;
41.Development of the half-angle divergence metrology applied to the inner-layer exposure facility for PCB industry

机译：开发应用于PCB行业内层曝光设施的半角分歧计量
- 作者：Chia-Ming Jan;Cheng-Bang Huo
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Integrated optics;
- Optical sensors;
- Metrology;
- Manufacturing;
- Adaptive optics;
- Optical design;
42.Analysis of injection molding parameters for graphene/polypropylene composite material with thermal conductivity as quality objective

机译：具有导热率的石墨烯/聚丙烯复合材料的注塑成型参数分析为优质目标
- 作者：Ching-Been Yang;Wei-Chang Peng;Yan-Wen Huang;Hsiu-Lu Chiang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Conductivity;
- Thermal conductivity;
- Graphene;
- Injection molding;
- Signal to noise ratio;
- Analysis of variance;
43.Study on the Efficiency of Automatic Matching for Various Aerial Survey Marks

机译：各种航空测量标志自动匹配效率研究
- 作者：Hung-Lin Lin;Chien-Lun Huang;Zhi-Yuan Huang;Shun-Jie Jhang;Liang-Ting Wu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Image processing;
- Photography;
- Cameras;
- Conferences;
- Manufacturing;
- Software;
- Image matching;
44.The implementation of a smart microchips system to applications on the modern medical applications

机译：将智能微芯片系统实施到现代医学应用中的应用
- 作者：Yue-Lin Hsieh;Yi-Chern Hsieh;Chih-Chieh Huang;Zhao Han
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Medical services;
- Wireless sensor networks;
- Monitoring;
- Medical diagnostic imaging;
- Sensors;
- Integrated circuits;
- Biomedical monitoring;
45.Fast evaluation of a linear scale for a linear encoder with a Fizeau interferometer and stitching technique

机译：具有不同传感器和缝合技术的线性编码器线性刻度的快速评估
- 作者：Xin Xiong;Hiraku Matsukuma;Xiuguo Chen;Yuki Shimizu;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
46.Gold Nanofilm in Optically-Induced Dielectrophoresis Chip for The Manipulation of Polystyrene Microparticles

机译：金纳米丝在光学诱导的电泳芯片中用于操纵聚苯乙烯微粒
- 作者：Yue-Chang Tsai;Ju-Nan Kuo;Yong-Hang Hong
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Dielectrophoresis;
- Gold;
- Electric fields;
- Force;
- Optical films;
- Optical imaging;
- Integrated optics;
47.Geometric Positioning Techniques Based on Tracking Algorithm for Indoor Dynamic Environments

机译：基于跟踪算法的室内动态环境的几何定位技术
- 作者：Yang-Ke Lin;Yih-Shyh Chiou;Ting-Lan Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Trajectory;
- Covariance matrices;
- Heuristic algorithms;
- Noise measurement;
- Kalman filters;
- Tracking;
- Mathematical model;
48.Study on a Vibration Test System for Bicycle Electric Attachments

机译：自行车电连接振动试验系统研究
- 作者：Yen-Chieh Mao;Lin Li-Cheng
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Vibrations;
- Bicycles;
- Acceleration;
- Shock absorbers;
- Consumer electronics;
- Manufacturing;
- Reliability;
49.Application of UVA in Soil and Water Conservation: Preparation of Planting Materials for UVA

机译：UVA在水土保持中的应用：UVA种植材料的制备
- 作者：Shih-Yi Fan;Ming-Fa Tsai;Liang-Hsing Chou;Yi-Ting Lai;Maw-Tien Lee
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Soil;
- Water conservation;
- Microscopy;
- Glass;
- Adsorption;
- Conferences;
50.The Development of Smart Manufacturing and Cases Study in Taiwan

机译：台湾智能制造与案例研究的发展
- 作者：T. C. Chan
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Smart manufacturing;
- Industries;
- Machine tools;
- Machinery;
- Process control;
51.Design of a Miniaturized UHF RFID Tag Antenna

机译：小型化UHF RFID标签天线的设计
- 作者：Hong-Xia Chen;Zhong-Hua Ma
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Impedance;
- Microstrip antennas;
- UHF antennas;
- RFID tags;
- Bandwidth;
52.Measurement and uncertainty analysis of a precision V-shaped ceramic part

机译：精密V形陶瓷部分的测量和不确定性分析
- 作者：Masami Kogure;Hiraku Matsukuma;Ryo Kobayashi;Yuki Shimizu;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Measurement uncertainty;
- Uncertainty;
- Ceramics;
- Coordinate measuring machines;
- Monte Carlo methods;
- Machining;
- Temperature measurement;
53.Angle measurement using a diffraction of optical frequency comb

机译：使用光学频率梳衍射的角度测量
- 作者：Kazuki Nakamura;Hiraku Matsukuma;Yuki Shimizu;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Measurement by laser beam;
- Laser beams;
- Optical fibers;
- Diffraction gratings;
- Optical reflection;
- Ultrafast optics;
54.ESD-Immunity Influence of 60-V pLDMOS by Vertical Floating Polysilicons on the Drain-side STI

机译：垂直浮动多晶硅在排水侧STI上垂直浮动多晶硅的抗抗震影响
- 作者：Shen-Li Chen;Yu-Lin Jhou;Pei-Lin Wu;Sheng-Kai Fan;Po-Lin Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Electrostatic discharges;
- Layout;
- Breakdown voltage;
- Conferences;
- Transistors;
- Voltage measurement;
- Reliability;
55.Fractal Characteristics of Particle Size on Debris Flow

机译：碎片流动粒径的分形特征
- 作者：Tung-Chiung Chang;Chen Wu;Yuan-Min Chu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Fractals;
- Rivers;
- Conferences;
- Manufacturing;
- Urban areas;
- Hazards;
- Tropical cyclones;
56.Application of IoT Technology in The Simple Micro-farming Environmental Monitoring

机译：IOT技术在简单的微农业环境监测中的应用
- 作者：Chin-Feng Tsai;Ting-Wen Liang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Temperature sensors;
- Wireless fidelity;
- Zigbee;
- Monitoring;
- Servers;
- Agriculture;
57.Study on the Application of Data Mining Method in Enterprise Financial Management

机译：数据挖掘方法在企业财务管理中的应用研究
- 作者：Jiajin Liu;Zhigang Huang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Data mining;
- Financial management;
- Databases;
- Data models;
- Analytical models;
- Economics;
58.Evaluation of Building Yacht Wharf with Fishing Port

机译：用渔港建筑游艇码头评估
- 作者：Tung-Chiung Chang;Chun-Lin Ho;Li-Chuan Lien
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Boats;
- Aquaculture;
- Analytic hierarchy process;
- Buildings;
- Urban areas;
- Conferences;
- Manufacturing;
59.Study of Indoor exhibitions using BEACON’s Mobile Navigation

机译：使用灯架移动导航室内展览研究
- 作者：Ding-Yu Liu;Cheng-Yu Hsieh
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Mobile handsets;
- Global Positioning System;
- Wireless communication;
- Bluetooth;
- Business;
- Conferences;
60.Mouse operation data collection automation system using ESP32 and AppInventer

机译：使用ESP32和App Inventor的鼠标操作数据收集自动化系统
- 作者：Yu-Xiang Zheng;Ming-Chung Tang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Mice;
- Smart phones;
- Databases;
- Medical services;
- Monitoring;
- Software;
- Conferences;
61.Analysis and Design of Differential bevel gear

机译：差动锥齿轮的分析与设计
- 作者：Pei-Yu Wang;Kuang-Lun Liu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gears;
- Stress;
- Mathematical model;
- Solid modeling;
- Analytical models;
- Data models;
- Finite element analysis;
62.Optimization of cooling conditions and cutting parameters during hard milling of AISI H13 steel by using Taguchi method

机译：用TAGUCHI方法优化AISI H13钢硬磨过程中的冷却条件和切割参数
- 作者：The-Vinh Do;Ngoc-Chien Vu;Quoc-Manh Nguyen
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Cooling;
- Rough surfaces;
- Surface roughness;
- Feeds;
- Machining;
- Signal to noise ratio;
- Lubricants;
63.A study on the design factors of the bridal hairstyling by Analytic Hierarchy Process

机译：分析层次过程的新娘发型设计因素研究
- 作者：Shu-Ping Chiu;Ya-Chun Wang;Wei-Cheng Chu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Hair;
- Industries;
- Photography;
- Clothing;
- Conferences;
- Forehead;
64.Theoretical investigation on measurement range of a femtosecond laser chromatic confocal probe by utilizing side-lobe of axial response

机译：利用轴向响应侧叶对飞秒激光色谱探针测量范围的理论研究
- 作者：Chong Chen;Hiraku Matsukuma;Ryo Sato;Xiuguo Chen;Yuki Shimizu;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Measurement by laser beam;
- Lenses;
- Probes;
- Laser mode locking;
- Wavelength measurement;
- Laser theory;
- Microscopy;
65.Comparison the Plane Precision of UAS Aerial Survey Between Image Processing and GNSS Measuring Data

机译：比较UAS图像处理与GNSS测量数据的飞机精度
- 作者：Tsung-Yi Lin;Jung-Fa Wang;Hung-Lin Lin;Cheng-Tsung Lee
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Coordinate measuring machines;
- Measurement uncertainty;
- Cameras;
- Measurement errors;
- Image resolution;
- Mathematical model;
66.Study of the Reducing Carbon Emission by Using Hot Spring Eggs

机译：用温泉蛋减少碳排放研究
- 作者：Jung-Wei Chen;Chin-Hung Kuo;Cheng-Haw Lee;Bi-Wen Lee
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Springs;
- Carbon dioxide;
- Conferences;
- Irrigation;
- Fuels;
67.Improvement of Surface Roughness in Electrical Discharge Machining by Using Ultrasonic Auxiliary Electrode

机译：超声辅助电极改善电气放电加工表面粗糙度
- 作者：Shao-Yi Hsia
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Discharges (electric);
- Machining;
- Surface discharges;
- Electrodes;
- Rough surfaces;
- Surface roughness;
- Acoustics;
68.Study on the dormitory public facilities management using BIM

机译：使用BIM研究宿舍公共设施管理
- 作者：Tsung-Yi Lin;Hsin-Yi Shih;Jia-Chang Huang;Yu-Lien Hou;Yun Yin Chiu;Yi-Xiu Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Maintenance engineering;
- Solid modeling;
- Software;
- Data models;
- Google;
- Buildings;
- Conferences;
69.Study on the Education and Learning Path for Construction Engineering Cost Professionals in Science, Technology, Engineering and Mathematics

机译：科学，技术，工程与数学建筑工程成本专业人士教育与学习路径研究
- 作者：Liuqun Dong;Lizhi Cui;Wei-Ling Hsu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- STEM;
- Training;
- Mathematical model;
- Computational modeling;
- Conferences;
70.Modeling for Locating Pin Adjustment on Fixtures to Improve Positioning Accuracy of Parts

机译：用于定位夹具调整的建模，提高零件定位精度
- 作者：Ying Liu;Yuwen Li;Xin Wen
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Pins;
- Fixtures;
- Mathematical model;
- Error compensation;
- Manufacturing;
- Drilling machines;
71.Integration of Master Cam and Ls -Dyna for the Single Point Incremental Process

机译：主凸轮和LS -DYNA的集成为单点增量过程
- 作者：Ching-Lun Li;Yung-Kuan Ni;Yuung-Hwa Lu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Tools;
- Finite element analysis;
- Software;
- Shape;
- Numerical simulation;
- Surface treatment;
- Matlab;
72.The design of a reminder device for placing shared bikes neatly based on attitude sensors

机译：基于姿态传感器整洁地放置共用自行车的提醒装置的设计
- 作者：Jiabin Hu;Jingbing Li;Saqib Ali Nawaz
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Sensors;
- Bicycles;
- Heuristic algorithms;
- Conferences;
- Manufacturing;
- Urban areas;
- Control systems;
73.Analysis on Scientific and Technological Innovation Capacity for the Yangtze River Economic Belt

机译：长江经济带科技创新能力分析
- 作者：HAIYING XU;Wei-Ling Hsu;TAOLIN ZHANG
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Technological innovation;
- Indexes;
- Economics;
- Urban areas;
- Rivers;
- Belts;
- Conferences;
74.3D Scanning System of Structured Light for Aiding Workpiece Position of CNC Machine Tool

机译：CNC机床辅助工件位置的三维扫描系统
- 作者：Wen-Yang Chang;Jia-Wei Hsu;Bo-Yao Hsu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Three-dimensional displays;
- Cameras;
- Machine tools;
- Solid modeling;
- Mathematical model;
- Image edge detection;
- Reflective binary codes;
75.A platform-independent communication framework for the simplified development of shop-floor applications as microservice components*

机译：独立于平台的通信框架，用于简化车间应用的简化开发，作为MicroService组件 *
- 作者：Matthias Milan Strljic;Tobias Korb;Timur Tasci;Erik-Felix Tinsel;Daniel Pawlowicz;Oliver Riedel;Armin Lechler
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Protocols;
- Automation;
- Data models;
- Computer architecture;
- Method of moments;
- Standards;
- Throughput;
76.The Computation Study of Flow Fields for the Stretch Blow Molding Machine

机译：拉伸吹塑机的流场的计算研究
- 作者：Yi-Chern Hsieh;Hui-Fang Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Preforms;
- Temperature distribution;
- Cooling;
- Infrared heating;
- Mathematical model;
77.A Design of Wearable Goniometers for Measuring Carpal Angular Movement

机译：用于测量腕骨角运动的可穿戴测量计的设计
- 作者：Shih-Miao Huang;Pei-Yu Gi;Pei-Ying Wu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gyroscopes;
- Sensitivity;
- Mathematical model;
- Goniometers;
- Wrist;
- Sensors;
- Cameras;
78.Establishment of a Groundwater Management Index for the Szuchung Creek Hot-Spring

机译：建立斯春河温泉的地下水管理指数
- 作者：Wei-Ping Chen;Jui-Teng Wang;Chi-Chuan Kan;Hung-I Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Fluctuations;
- Water resources;
- Springs;
- Standards;
- Monitoring;
- Conferences;
79.A CNN-RNN Neural Network Join Long Short-Term Memory For Crowd Counting and Density Estimation

机译：CNN-RNN神经网络加入长期内存以供人群计数和密度估计
- 作者：Jingnan Fu;Hongbo Yang;Ping Liu;Yuzhen Hu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Task analysis;
- Training;
- Feature extraction;
- Estimation;
- Conferences;
- Convolutional neural networks;
- Cameras;
80.Prediction Model of Unit Consumption for Oilfield Water Injection Based on the Grain of Association Rule and Chaotic Time Series

机译：基于关联规则和混沌时间序列的油田注水单位消耗预测模型
- 作者：TAN Chaodong;Feng Gang;Liu Ping;PENG Zhenhua;YANG Ruogu;Li Jingjia
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Energy consumption;
- Indexes;
- Time series analysis;
- Predictive models;
- Water resources;
- Delays;
- Correlation;
81.Effects of Axial Jet-to-Wall Distance on Flow Behavior and Heat Transfer of a Wall Jet at Low Reynolds Number

机译：轴向射流距离对低雷诺数壁射流的流动性和传热的影响
- 作者：Minh Duc Le;Ching Min Hsu;Navik Kholili;Shao Hsin Lu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Heat transfer;
- Visualization;
- Fluid flow measurement;
- Temperature distribution;
- Conferences;
- Manufacturing;
- Velocity measurement;
82.Study of Disaster Prevention Education for Senior Vocational High School Sustainable Campus in Taiwan

机译：台湾高职高中可持续校园防灾教育研究
- 作者：Yuan-Min Chu;Tung-Chiung Chang;Chien-Cheng Tsai;Hung-Lin Lin
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Education;
- Sustainable development;
- Safety;
- Civil engineering;
- Conferences;
- Manufacturing;
- Earthquakes;
83.Investigating Multiple Quality Objectives for Surface Roughness and Dimensional Accuracy of Carbon Steel Manufactured by Turn-Mill Multitasking Machining

机译：调查由磨机多任务加工制造的碳钢表面粗糙度和尺寸精度的多种质量目标
- 作者：Wei-Tai Huang;Ting-Yi Lee;Jyh-Horng Chou
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Rough surfaces;
- Surface roughness;
- Machining;
- Surface treatment;
- Optimization;
- Multitasking;
- Manufacturing;
84.The User Research of Interactive APP Design for 2016 Yilan Green Expo Food-Ethics Museum

机译：2016年伊兰绿色世博会食品伦理博物馆互动应用设计的用户研究
- 作者：Yu-Shing Chang;Yi-Chou Tsai;Tsun-Hsien Wang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Education;
- Safety;
- Agriculture;
- Ethics;
- Media;
- Smart phones;
- Technological innovation;
85.A Framework for Implementation of 3D-printing of Manufacturing Equipment

机译：制造设备3D印刷实施框架
- 作者：Kampker Achim;Triebs Johannes;Kawollek Sebastian
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Three-dimensional printing;
- Tools;
- Conferences;
- Databases;
- Companies;
86.Potential analysis of additive manufacturing technologies for fabrication of polymer tools for injection moulding – A comparative study

机译：添加剂制造技术的潜在分析，用于制备注射成型的聚合物工具 - 比较研究
- 作者：Achim Kampker;Johannes Triebs;Bruno Alves Ford;Sebastian Kawollek;Peter Ayvaz
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Tools;
- Injection molding;
- Steel;
- Filling;
- Polymers;
- Economics;
87.Pattern design of the platform for mixing and sorting by the magnetic principle

机译：用磁原理混合和分类平台的图案设计
- 作者：Yao-Tsung Lin;Chien-Sheng Huang;Yi-Ling Ye;Shi-Chang Tseng
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Magnetic separation;
- Magnetic liquids;
- Reservoirs;
- Fluids;
- Sorting;
- Shape;
- Force;
88.Effects of the MIG weld-brazing parameter on the lap-joint performance of aluminum alloy to galvanized steel sheet

机译：MIG焊钎焊参数对镀锌钢板铝合金旋盖关节性能的影响
- 作者：Hsuan-Liang Lin;Chien-Hang Lee;Hsin-Ya Chen;Fu-Jyun Nan
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Welding;
- Steel;
- Feeds;
- Wires;
- Aluminum alloys;
- Geometry;
89.The Analysis of Animation Narration for Short Animation – The Short Film: CARN

机译：短动画动画叙事分析 - 短片：Carn
- 作者：Yuh-Shihng Chang;Yan-Hong Chen
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Animation;
- Motion pictures;
- Visualization;
- Tools;
- Lenses;
- Conferences;
90.Innovative Design Padlock Combined with Plastic and Metal-Plastic Structure for Padlock by Molding Flow Analysis

机译：通过模塑流动分析，创新设计挂锁与挂锁的塑料和金属塑料结构相结合
- 作者：Teng-Hui Chen;Chun-Ta Huang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Plastics;
- Logic gates;
- Metals;
- Filling;
- Cooling;
- Injection molding;
- Stress;
91.The Prototype of a Smart Underwater Surveillance System for Shrimp Farming

机译：虾农业智能水下监控系统的原型
- 作者：Ing-Jer Huang;Chin-Chang Hung;Shiann-Rong Kuang;Yun-Nan Chang;Kuan-Yu Huang;Chang-Ru Tsai;Kai-Lin Feng
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Feeds;
- Image recognition;
- Artificial intelligence;
- Image enhancement;
- Monitoring;
- Aquaculture;
- Sensors;
92.An optical frequency comb operating in the mid-infrared region for wide-range and high-precision optical sensor

机译：一种光学频率梳，用于中红外区域，用于宽范围和高精度光学传感器
- 作者：Yun ASUMI;Hiraku MATSUKUMA;Yuki SHIMIZU;Wei GAO
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
93.Behavioral Classification of Drivers for Driving Efficiency Related ADAS Using Artificial Neural Network

机译：使用人工神经网络驾驶效率相关ADA的行为分类
- 作者：Zheng-Jie Cheng;Lih-Wei Jeng;Kang Li
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Vehicles;
- Training;
- Predictive models;
- Conferences;
- Artificial neural networks;
- Acceleration;
- Data models;
94.Effect of polymer to cement ratio on seawater corrosion resistance of polymer modified cementitious coatings

机译：聚合物对聚合物改性水泥涂层海水耐腐蚀性的影响
- 作者：Chuankui Sun;Honghua Liu;Lele Liu;Piqi Zhao;Yongbo Huang;Lingchao Lu
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Coatings;
- Polymers;
- Mortar;
- Resistance;
- Concrete;
- Corrosion;
- Sea measurements;
95.Design and Development of an Operational Performance Index for Power Generation Systems

机译：发电系统运行性能指标的设计与开发
- 作者：Chia-Hung Hsieh;Shu-Wei Liu;Yung-Ching Huang;Wei-Min Lin;Yu-Hung Lin;Jen-Hao Teng;Wei-Hao Huang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Power generation;
- Performance analysis;
- Power supplies;
- Standards;
- Power system reliability;
- Reliability;
- Indexes;
96.Crosstalk error analysis of a multi-degree-of-freedom surface encoder for a planar motion stage

机译：平面运动阶段多程度自由度表面编码器的串扰误差分析
- 作者：Ryo Ishizuka;Hiraku Matsukuma;Yuki Shimizu;Wei Gao
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Gratings;
- Crosstalk;
- Measurement by laser beam;
- Laser beams;
- Optical sensors;
- Semiconductor device measurement;
97.A Measurement System for the Performance Evaluation of Roots Blowers

机译：一种测量系统，用于革无众
- 作者：Rong-Yuan Jou;Wen-Hsin Huang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Temperature measurement;
- Testing;
- Meters;
- Torque;
- Torque measurement;
- Pressure measurement;
- Standards;
98.Automated Dual-probing System for Wafer-level Testing Based on the Integration of Visual Identification and Laser Sensing

机译：基于视觉识别和激光传感的集成的晶圆级测试自动化双探测系统
- 作者：Ya-Ting Huang;Rongshun Chen
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Sensors;
- Measurement by laser beam;
- Visualization;
- Micromechanical devices;
- Probes;
- Laser feedback;
- Semiconductor device measurement;
99.State of Charge Estimation for Lithium-ion Battery using Recurrent Neural Network

机译：使用复制神经网络的锂离子电池的充电状态
- 作者：Van-Tsai Liu;Yi-Kai Sun;Hong-Yi Lu;Sun-Kai Wang
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- State of charge;
- Estimation;
- Resistance;
- Discharges (electric);
- Electrical resistance measurement;
- Lithium-ion batteries;
100.Supplier Selection for Manufacturing Industries

机译：制造业供应商选择
- 作者：Chia-Nan Wang;Dinh-Chien Dang;Quoc-Quan Vu;Yu-Xiang Zeng
- 会议名称：《IEEE International Conference on Advanced Manufacturing》 | 2018年
- Manufacturing;
- Companies;
- Quality assessment;
- Product design;
- Mathematical model;
- Production;
- Safety;