首页>外文会议>其他>International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products

International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Inspecting the Quality of a Surface Layer in Non-Rigid Shafts Turning by Adaptive Control over the Process of Cutting

机译：通过对切割过程的自适应控制来检查非刚性轴的表面层的质量
- 作者：Juliy L. CHIGIRINSKIY;Pavel S. NESTERENKO;Elena N. SMIRNOVA
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Quality of the surface layer;
- Adaptive control;
- Turning of non-rigid shafts;
- Surface roughness;
2.Optimization of Cutting Conditions for Turning of Ductile Materials to Achieve Favourable Ship Form

机译：延展性材料转动切割条件的优化，实现有利船舶
- 作者：Stanislav V. MIKHAILOV;NikolayY. KOVELENOV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Ductile Materials;
- Turning;
- Optimal Cutting Parameters;
- Chip Form;
3.Briquettes Made from the Chips after Abrasive Grinding of Rolled High-Alloy Steels as an Advanced Charge Material Solution

机译：由碎屑研磨后的碎屑制成的煤油作为先进的电荷材料溶液
- 作者：Igor L. GONIK;LyubovV. PALATKINA;Dmitriy N. GURULEV;Dmitriy M. SHILIKHIN
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
4.Formation of Residual Stresses in the Internal Combustion Engine Sleeves after Abrasive Processing and Operation

机译：磨料加工和操作后内燃机套管中的残余应力的形成
- 作者：Mariya Y. Polyanchikova;Yuriy N. Polyanchikov;Oleg A. Kursin
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Internal combustion engine sleeves;
- Abrasive tools;
- Oversize;
- Residual stresses;
5.The Modeling of Combined Stress State of the Drilling Bit Body during the Selective Press Fitting of Picks in it

机译：钻孔钻孔钻头体组合应力状态的建模
- 作者：Nikolay V. POLEZHAEV;Maksim D. KHOROSHEVSKIY;Mark G. KRISTAL;Vladimir V. PREIS
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Drilling Bit;
- Selective Press;
- Solid-State Model;
- Finite-Element Model;
- Stress-Deformed State;
6.The Study of the Processing Accuracy after the Grinding of the Inner Ring Raceway with the Abrasive Tool without a Sheaf

机译：用磨料工具磨削内圈滚道后的加工精度的研究
- 作者：Alexander I. BANNIKOV;Nikolay A. DYATLOV;Olga A MAKAROVA;Alexey G. SEROV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
7.Studying the Impact of the Roughness of the Tool Surface Formed by Ultrasonic Exposure on the Roughness of the Holes Being Machined

机译：通过超声波曝光形成的工具表面的粗糙度对加工孔的粗糙度的影响
- 作者：Sergey I. AGAPOV;Yuriy I.SIDYAKIN;Oleg F. KORPELYANSKIY
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Ultrasonic vibration;
- Core drilling;
- Surface roughness;
8.Calculation of Roughness Parameters during Ultrasonic Hobbing from the Viewpoint of the Theory of Elastic-Plastic Contact

机译：从弹性塑料接触理论的观点来看超声波滚动期间的粗糙度参数计算
- 作者：Sergey I. AGAPOV;Yuriy I. SIDYAKIN;Oleg F. KORPELYANSKIY
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Hobbing;
- Ultrasonic vibration;
- Surface roughness;
- Elastic-plastic deformation;
9.Effect of Temperature Calcinations of Clay on Strength of Moulding Mixture

机译：粘土温度煅烧对成型混合物强度的影响
- 作者：Nikolay A. KIDALOV;Anna S. ADAMOVA;Viktoriya V. SMIRNOVA
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Bentonite clay;
- Sand-clay mixture;
- Moulding materials;
- Calcining clay;
- Stress limit;
10.Removal of Defective Layer after Electrical Discharge Machining

机译：放电加工后去除缺陷层
- 作者：Stanislav A. MOZGOV;Yuriy A. MORGUNOV;Boris P. SAUSHKIN
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Electrical Discharge Machining;
- Electrochemical Machining;
- Defective Layer;
- Electrolyte Composition;
- Machining Parameters;
11.The Quality of a Surface Received by Processing the End of a Large Diameter Pipe with the Use of a Single-Row Cylindrical Brush

机译：通过使用单排圆柱刷加工大直径管道的端部接收的表面的质量
- 作者：Alexander I. BANNIKOV;Vasilisa I. ALEKSEYCHUK;Olga A MAKAROVA;Nikolay A. DYATLOV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- the quality of a surface;
- the cylindrical brushes;
- the pipe coating;
- the primer;
- the layer of epoxy;
- the layer of polyethylene;
12.The Peculiar Properties of Obtaining the Abrasive Tool without a Sheaf

机译：在没有捆的情况下获得磨料工具的特殊特性
- 作者：Alexander I. BANNIKOV;Nikolay A. DYATLOV;Juliy L. CHIGIRINSKIY;Olga A MAKAROVA
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Abrasive tool without a sheaf;
- Shock wave;
- High temperature sintering;
- Final processing;
13.Formation of the Surface Layer Properties in Edge Cutting Machining of Stainless and Heat-Resistant Steels

机译：不锈钢和耐热钢边缘切割加工表面层性能的形成
- 作者：Dmitriy V. KRAYNEV;Evgeniy M. FROLOV;Pavel A. NORCHENKO
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Surface Layer;
- Machining of Stainless and Heat-Resistant Steels;
- Advanced Plastic Deformation;
14.Increasing Innovation Capacity of the Methods of Ultrasonic Machining of Ceramics and Composites with a Diamond-Impregnated Tool

机译：含有金刚石浸渍工具的陶瓷和复合材料的超声波加工方法的创新能力
- 作者：Yuriy A. MORGUNOV;Artem I. OPALNITSKIY;Boris P. SAUSHKIN
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
15.An Investigation of Ingots Teemed under Different Thermal and Physical Solidification Conditions and the Analysis of Metal Quality of the Hollow Forgings Produced

机译：不同热物理凝固条件下铸锭的研究及中空锻造金属质量分析
- 作者：Sergey B. GAMANYUK;Dmitry V. RUTSKII;N.A. ZYUBAN
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Ingot;
- Solidification;
- Hot top cooling;
- Feeder;
- Shrinkage;
- Nonmetallic inclusions;
- Mechanical properties;
- Hollow forging;
16.Investigation of the Influence of the Thermal Conductivity of the Buildup on Tool Durability

机译：调查积累对刀具耐用性的热导率的影响
- 作者：Alexander I. BANNIKOV;Dmitry V. PRONICHEV;Olga A. MAKAROVA;Nikolay A. DYATLOV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Rotary saws;
- Tool durability;
- Layers of buildup;
- Thermal conductivity;
17.The Study of the Influence of Ultrasonic Vibrations on Structural Changes of Steel

机译：超声振动对钢结构变化影响的研究
- 作者：Albert V. KOROLEV;Andrei F. BALAYEV;Alexei N. VASIN
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Ultrasound;
- Residual Stresses;
- Structure;
- Strain;
- Dislocation;
- Technology;
18.Analyzing the Features of Non-Metallic Inclusion Distribution in ?410 mm Continuously Cast Billets of Low Carbon Steel Grades

机译：在α410mm连续铸造低碳等级中的非金属夹杂物分布的特征分析
- 作者：Mikhail Y. CHUBUKOV;Dmitriy V. RUTSKIY;Dmitriy P. USKOV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Seamless steel pipe;
- Pre-peritectic steel;
- Peritectic steel;
- Microstructure;
- Carbide phase;
- Non-metallic inclusions;
- Continuously cast billet;
19.Analyzing the Mechanisms of Cutting Tool Wear during the Machining of Corrosion-Resistant Steels

机译：分析耐腐蚀钢加工过程中的切削刀具磨损机理
- 作者：Pham H. TRUNG;Juliy L. Chigirinskiy
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Tool wear;
- Tool wear resistance;
- Wear-resistant coating;
- Intermediate diffusion layer;
- Advanced plastic deformation;
20.Formation of the Properties of the Surface Layer During Multi-Stage Milling

机译：多级铣削期间形成表面层的性质
- 作者：Juliy L. Chigirinskiy;Ngo Quang Trong;Ivan V. Firsov
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Depth of the defect layer;
- Technological capabilities of milling;
- Surface quality;
- technological routing;
21.The Method of Reducing of Springback Effect during Impact Bending of Sheet Steel Blanks

机译：薄片钢坯料冲击弯曲期间减少回弹效应的方法
- 作者：Vladislav Y. LAVRINENKO;Ruslan R. SHAGALEEV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Sheet metal forming;
- Bending;
- Springback;
- Hammer for sheet metal forming;
22.The Influence of Ultrasonic Impact Treatment on Steel Corrosion Resistance

机译：超声波冲击处理对钢耐腐蚀性的影响
- 作者：Makhmut M. GANIEV;llnur M. GANIEV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Ultrasound;
- Corrosion resistance;
- Surface plastic deformation;
- Inhibitor;
23.The Influence of Wedge Body Surface Relief on Quality Indicators of Pulse Variable Transmission

机译：楔形体表面浮雕对脉冲变速器质量指标的影响
- 作者：Vasiliy G. KARABAN
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Relief;
- Surface;
- Basic surface;
- Wedge;
- Indicators quality;
- Pulse variable;
- Transmission;
- Freewheeling mechanism;
24.Mechanical Strength of Abrasive Segment Formed by the High-Frequency Discretization of Grinding Wheel

机译：磨轮高频离散化形成的磨料段的机械强度
- 作者：Aleksey V. Morozov;Vladimir G. Gusev
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Discrete grinding;
- Cutting surface;
- Grinding wheel;
- High-frequency discretization;
- Abrasive segment;
- Mechanical strength;
25.Structuring Control of Facial Layer during Edge Cutting Machining

机译：边缘切割加工过程中面部层的结构控制
- 作者：Dmitriy V. Kraynev;Alexander S. Sergeev;Zhanna S. Tikhonova
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
26.Physical Principles for Forming the Microgeometry of the Surface Layer in the Steel Edge Cutting Machining

机译：用于在钢边缘切割加工中形成表面层的微曲面测定的物理原理
- 作者：Alexander S. SERGEEV;Zhanna S. TIKHONOVA;Tatiana V. UVAROVA
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Hardening;
- Surface layer;
- Microgeometry;
- Technological regimes;
- Edge cutting machining;
- Dislocation-energy theory;
- Thermal strength;
27.Relaxation of Residual Stresses in Bearing Rings Based on the Optimal Geometric Setup of Equipment for Centerless Running

机译：基于无心跑步的最佳几何设置，放松轴承环中的残余应力
- 作者：Albert V. Korolev;Andrey F. Balayev;Boris M. lznairov
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Centerless Break-In;
- Bearing Rings;
- Residual Stress;
- Deformation;
- Adjustment;
28.Investigation of the Influence of the Deformation Rate on the Structure of the Blank at the Upsetting

机译：调查变形率对镦粗时坯料结构的影响
- 作者：Mikhail A. Serezhkin;Roman N. Zadorozhniy;Arseniy S. Kalinin;Luiza K. Minyazeva
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Pressure treatment;
- Adhesing;
- Structure;
- Heat removal;
- Upsetting;
29.The Development of Informational-Executive Cyber-Physical Systems in Materials Production and Metalworking

机译：在材料生产和金属加工中的信息 - 执行网络 - 物理系统的发展
- 作者：Alexander R. Ingemansson
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Metallworking;
- Industry 4.0;
- Cyber-physical systems;
- Materials production;
- Machining operations;
30.Influence of Cutting Speed on Interaction Type and Temperature During Turning of a-Titanium Alloy

机译：切削速度对钛合金转动过程中的相互作用型和温度的影响
- 作者：Vladimir A. SOLODKOV;Sergey I. KORMILITSIN;Aleksandr I. KURCHENKO
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Titanium allow;
- Carbide cutting tool;
- Wearing;
- Cutting temperature;
31.The Features of Nanocomposite Structure Formation on the Surface of Metal Products under the Influence of Low-Temperature Plasma

机译：低温等离子体影响下金属产物表面纳米复合材料结构的特征
- 作者：B.M. Brzhozovsky;E.P. Zinina;V.V. Martynov
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Complex Profile Surface;
- Hardening;
- Low-Temperature Plasma;
- Nanocomposite Structure;
32.Hobbing of Cylindrical Wheels without Coolants

机译：没有冷却剂的圆柱形轮毂
- 作者：Aleksandr S. KALASHNIKOV;Yuriy A. MORGUNOV;Pavel A. KALASHNIKOV
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Hobbing;
- Worm Hob;
- Coolant;
- Cutting Speed;
- Axial Feed;
33.Production of High-Quality Castings from Gray Iron by Differentiated Cooling in Iron Mould

机译：通过在铁模具中的差异化冷却生产从灰铁的高质量铸件
- 作者：Natalia I. Gabelchenko;Artem A. Belov;Oksana N. Meshcheryakova
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Cast Iron;
- Structurally Sensitive Crystallization Intervals;
- Forced Cooling;
- Microstructure;
- Tensile Strength;
34.Electron-Microscopic Examination of the Surface Layer of Titanium Alloys OT4 after Ion Implantation

机译：离子植入后钛合金表面层的电子 - 微观检查OT4
- 作者：Victor V. OVCHINNIKOV;Nadezhda V. UCHEVATKINA;Elena V. LUKIANENKO;Irina A. KURBATOVA;Svetlana V. YAKUTINA
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
35.Influence of the Properties of Hydraulic-Cylinder Barrels Materials on the Formation of Errors During Deep Borehole Drilling

机译：液压缸桶材料性能对深层钻孔钻井期间误差形成的影响
- 作者：Asya Y. GORELOVA;Mark G. KRISTAL
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Cutting;
- Boring errors;
- Computer modeling;
- Computer modeling of boring process;
- Mathematical modeling of boring process;
36.Contactless Evaluation of the Microgeometry of the Machined Surface

机译：非接触式加工表面微曲线测定的评价
- 作者：Juliy L. Chigirinskiy;Alina P. Gontar
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
37.Technological Quality Assurance of Assembly Units Based on Functional Changes of Dimensional Relations with the Use of CALS Technologies

机译：基于使用Cals Technologies的维度关系功能变化的组装单位技术质量保证
- 作者：Evgeniy A. POLSKY;Sergey V. SOROKIN
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Surface quality;
- Dimensional chains;
- Accuracy;
- Performance properties;
38.Influence of Solid Lubricants on the Working Efficiency of a Coated-Carbide Cutting Tool under Interrupted Cutting Conditions

机译：间断切削条件下固体润滑剂对涂层硬质合金刀具工作效率的影响
- 作者：Vladimir A. SOLODKOV;Sergey I. KORMILITSIN;Aleksandr I. KURCHENKO
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Solid lubricant;
- Carbide cutting tool;
- Abrasion resistant coating;
- Interrupted cutting conditions;
39.Determination of the Thermal Conductivity of Metal-Polymers

机译：金属聚合物导热系数的测定
- 作者：Mikhail S. CHEPCHUROV;Nikolay S. LUBIMYI;Vladimir P. VORONENKO;Daniel R. ADENIYI
- 会议名称：《International Scientific and Technical Conference on Engineering - Innovation Technologies in Engineering: from Design to Production of Competitive Products》 | 2019年
- Mold;
- Metal-polymer;
- Thermal conductivity;
- Temperature;
- Schedule;
- Product;
- Pyrometer;
- Heat flow;