首页>外文会议>其他>International Conference on Design, Materials, Cryogenics and Constructions

International Conference on Design, Materials, Cryogenics and Constructions

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.An Experimental Augmentation of Gravity-Assisted Concentric-Tube Heat Pipe Induced Heat Exchanger Under the Influence of Methanol and Acetone Working Fluids

机译：重力辅助同心管热管诱导热交换器的实验增强甲醇和丙酮工作流体的影响
- 作者：P. Ramkumar;M. Sivasubramanian;P. RajeshKanna;P. Raveendiran
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Heat pipe;
- Concentric-tube heat exchanger;
- Gravity-assisted angles;
- Working fluids;
- Mass flow rate;
- Effectiveness;
2.Investigation on the Temperature Effect of Friction Welding Process for Dissimilar Materials: Ti-6Al-4V and SS304L with Aluminium Coated

机译：不同材料摩擦焊接工艺温度效应的研究：Ti-6Al-4V和铝涂层的SS304L
- 作者：R. Ramesh Kumar;R. Varatharajan;V. Vinu Vaishak
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Titanium;
- Stainless steel;
- Aluminium;
- Friction welding;
- Friction time;
- Forging pressure;
- Rotational speed and friction pressure;
3.Effect of Wire EDM Process Parameters on Machining of Aluminium Matrix Composites (356/Fly Ash)

机译：电线EDM工艺参数对铝基复合材料加工的影响（356 /粉煤灰）
- 作者：J. Udaya Prakash;S. Ananth;S. Jebarose Juliyana;P. John Paul
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Aluminium matrix composites;
- ANOVA;
- Grey relational analysis;
- Stir casting;
- WEDM;
4.The Role of Processing Temperature in Equal Channel Angular Extrusion: Microstructure Mechanical Properties and Corrosion Resistance

机译：加工温度在等通道角挤出中的作用：微观结构机械性能和耐腐蚀性
- 作者：Gajanan M. Naik;S. Narendranath;S. S. Satheesh Kumar
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- AZ80;
- ECAE;
- Polarization;
- Micro-hardness;
- Corrosion;
5.Investigations on Interrelations Between Design for X-Guidelines and Product Life cycle Phases - An MDM-Based Approach

机译：对X-12指南和产品生命周期阶段设计中的相互关系的调查 - 基于MDM的方法
- 作者：M. Manojkummar;K. E. K. Vimal;Abdul Zubar Hammed;K. Jayakrishna
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Design for x;
- DFX-X;
- Life cycle;
- Product planning;
- MDM;
6.Design and Analysis of an Agriculture Solar Panel Support Structure with Tilting Mechanisms

机译：倾斜机构的农业太阳能电池板支撑结构的设计与分析
- 作者：V. Aghilesh;P. Manigandan;Suresh Reddy;K. Raja sekar;N. Shunmugavelu
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Finite element method;
- Solar support system;
- Wind loads;
- Tilting mechanism;
7.Experimental Study on Vibration Control of Transportation Trailers Used for Spacecraft

机译：用于航天器的运输拖车振动控制的实验研究
- 作者：Nandikolla Diwakar;S. Balaguru
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
8.Experimental Investigation on Drilling of Kenaf-Banana Fiber-Reinforced Hybrid Fibre-Reinforced Polymer Composites

机译：Kenaf-Banana纤维增强杂交纤维增强聚合物复合材料钻井实验研究
- 作者：K. M. Alagappan;S. Vijayaraghavan;R. Giridharan;M. P. Jenarthanan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Natural fibre;
- Epoxy resin;
- Taguchi-grey relational analysis;
- Drilling;
- Delamination factor;
- Machining force;
- Characterization;
- Tungsten carbide;
9.Experimental Analysis of Hevea Brasiliensis Methyl Ester Diesel Blend with Antioxidant Additive in a Di-diesel Engine

机译：二柴油发动机中抗氧化添加剂HEVEA Brasiliensis甲酯柴油混合物的实验分析
- 作者：A. A. Muhammad Irfan;Sivanandi Periyasamy;A. Gurusamy
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
10.Influence of Cylindrical Threaded Tool Pin Profile on the Mechanical and Metallurgical Properties of FSW of ZE42 Magnesium Alloy

机译：圆柱形螺纹工具引脚轮廓对ZE42镁合金FSW机械和冶金特性的影响
- 作者：A. K. Darwins;M. Satheesh;G. Ramanan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Magnesium alloy;
- Friction stir welding;
- Microstructure;
- Hardness;
- X-ray diffraction;
11.Autonomous Risk and Hazard Management System for Smart Cities

机译：智能城市的自主风险与危险管理系统
- 作者：Arivukkarasan Raja;E. Pavithra
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Smart home;
- IoT;
- Teensy 3.2;
- Air quality;
12.Genetic Algorithm and Particle Swarm Optimization in Minimizing MakeSpan Time in Job Shop Scheduling

机译：最大限度地减少作业商店调度中的Mapspan时间的遗传算法和粒子群优化
- 作者：K. R. Anil Kumar;Edwin Raja Das
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Genetic algorithm;
- Job shop scheduling;
- Makespan time;
- Particle swarm optimization;
13.Experimental and Theoretical Investigation of Interaction Effect on Energy Absorption of Bi-tubular Structures Under Quasi-static Axial Crushing

机译：准静态轴压下双管结构能量吸收相互作用的实验与理论研究
- 作者：K. Vinayagar;A. Senthil Kumar;M. Vel Vignesh;K. Gokulan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Bi-tubular structures;
- Quasi-static axial crushing;
- Interaction effect;
- Mean crush force;
- Specific energy absorption;
14.A Review on Mechanical Properties of Medium Density Fiberboard Prepared from Different Fiber Materials

机译：用不同纤维材料制备的中密度纤维板力学性能综述
- 作者：N. Pugazhenthi;P. Anand
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Medium density fiberboard;
- Resin;
- Modulus of rupture;
- Modulus of elasticity;
15.Free Vibration and Buckling Analysis of FG-CNT Plates

机译：FG-CNT板的自由振动和屈曲分析
- 作者：Lenin Nagarajan;I. Mohammed Irfan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Buckling;
- Carbon nanotubes;
- Functionally graded;
- Vibration;
16.Topology Optimization and Modal Analysis of Nanosatellite Structure

机译：纳米卫星结构的拓扑优化和模态分析
- 作者：K. J. Vinay Kumar;K. Sesha Sai CharanTej;Nabin Kumar Jana;Diva Sharma;Balasubramanian Esakki
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Nanosatellite structure;
- Structural analysis;
- Modal;
- Harmonic;
- Topology optimization;
- Natural frequency;
17.Advancements in Automotive Applications of Fuel Cells - A Comprehensive Review

机译：燃料电池汽车应用的进步 - 全面审查
- 作者：Newel Francis Thomas;Rishabh Jain;Nishanth Sharma;S. Jaichandar
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Fuel cells;
- Hydrogen;
- FCV;
- PEMFC;
- Emissions;
18.Temperature Regulation of CIS Photovoltaic Module Using Eutectic Salt Hydrate as PCM

机译：用共晶盐水合物作为PCM的CIS光伏模块的温度调节
- 作者：P. Ramanan;K. Kalidasa Murugavel;D. Hari Kishan;G. Suriyanarayanan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Photovoltaic module;
- Phase change material;
- ANSYS;
- Efficiency;
- Power gain;
19.Development of Eco-friendly Alkaline Activated Concrete

机译：生态型碱性活性混凝土的开发
- 作者：Dhavamani Doss Sakthidoss;Thirugnanasambandam Senniappan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Alkaline solution;
- Binding property;
- CO_2 emission;
- Suitability of materials;
20.Design, Analysis and Fabrication of New Type Duct Air Cooling System for Radiators

机译：散热器新型管道空气冷却系统的设计，分析和制造
- 作者：K. Suryakumar;S. Irudayaraj
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Air duct;
- Collector panel;
- Nozzle;
- Pressure distribution;
- Heat flux;
21.Investigation on Helical Coiled Tube Heat Exchanger for Parallel and Counter Flow Using CFD Analysis

机译：用CFD分析对平行和计数流量的螺旋卷管热交换器的研究
- 作者：P. Saravana Bhavan;J. Selwin Rajadurai
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Heat exchanger;
- CFD analysis;
- Helical coil;
- ANSYS fluent;
22.Intelligent Fixture Layout Design for End Milling Process Using Artificial Neural Networks

机译：智能夹具布局设计，用于使用人工神经网络的端铣过程
- 作者：F. Michael Thomas Rex;D. Ravindran;A. Andrews;Lenin Nagarajan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- FEM;
- RSM;
- ANN;
- GA;
- Fixture layout;
23.Investigation of Wear Behavior of Rapid Solidified Al-Si Alloys

机译：快速凝固Al-Si合金磨损行为的研究
- 作者：N. D. K. Malleswararao;I. N. Niranjan Kumar
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Al-Si alloy;
- Tribology;
- Friction;
- Wear;
24.Experimental Investigation on the Emission Level of a Single Cylinder Petrol Engine with Manifolds of Different Geometry

机译：不同几何歧管歧管的单缸汽油发动机排放水平的实验研究
- 作者：K. Raja;Amala Justus Selvam;P. L. Rupesh
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- SI engine;
- Intake manifold;
- Venture;
- Convergent;
- CO and HC;
25.Design and Simulation of Self-balancing Robot Using Reaction Sphere

机译：反应球的自平衡机器人的设计与仿真
- 作者：M. Vignesh;A. S. Praveen
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Reaction sphere;
- Self-balancing;
- Inverted pendulum;
26.Thermogravimetric Analysis of Friction Welding of Dissimilar Material

机译：不同材料摩擦焊的热重分析
- 作者：V. Raja;P. Periyasamy;G. Boopathy;E. Naveen;N. Ramanan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
27.Mechanical Characterization of Prosopis Juliflora Fiber-Reinforced Polymer Composites

机译：Prosopis Juliflora纤维增强聚合物复合材料的机械表征
- 作者：J. Mohamed Yazzir;R. Prabu;S. Bharath;A. Anbu Raj
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Kikar;
- Reinforcement;
- Characterization;
- Extraction;
28.Investigation of Defects in Deep Drawn Al1050/SS304 Sandwich Composite by Using Non-destructive Techniques

机译：采用非破坏性技术研究深绘制AL1050 / SS304夹层复合材料的缺陷
- 作者：Atul S. Takalkar;Lenin Babu Mailan Chinnapandi
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Non-destructive testing;
- Radiography test;
- Scanning electron microscope;
- Deep drawing;
- Sandwich composite;
- Al1050;
- SS304;
29.Analytical Modeling and FEM Simulation of the Collapse Voltage of an Angular Ring Metallization-Based MEMS Ultrasonic Transducer

机译：基于角环金属化的MEMS超声换能器塌陷电压的分析模拟和有限元模拟
- 作者：Reshmi Maity;N. P. Maity;Shonkho Suvro;K. Guha;K. Srinivasa Rao;K. Girija Sravani;S. Baishya
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- CMUT;
- FEM;
- Finite element analysis (FEA);
- Collapse voltage;
- PZFlex;
30.Three-Dimensional FE Model and Temperature Evaluation on AA 2014 Friction Stir Weldments with Steel and Cu-Backing Plates

机译：用钢和Cu镀板的AA 2014摩擦搅拌焊晶体三维Fe模型及温度评价
- 作者：Swathi Balaji;K. Balachandar
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Friction stir welding;
- Aluminium alloy 2014;
- Temperature distribution;
- ABAQUS;
31.Optimization of Turning Process Parameters in Machining of Heat-Treated Ductile Iron Bar Using TiC/TiCN/Al_2O_3-Coated Tungsten Carbide Tool

机译：用TIC / TICN / AL_2O_3涂层碳化钨工具优化热处理性延展性钢筋机械加工过程参数
- 作者：K. Ramesh;K. Gnanasekaran;S. Prathap Singh;M. Thayumanavan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Heat-treated ductile iron;
- Chemical vapour deposition;
- Material removal rate;
- Surface roughness;
- Taguchi technique;
32.Numerical Analysis of Critical Heat Flux for Vertically Upward and Downward Flows in Circular Pipe Sections

机译：圆形管道垂直向上和向下流动临界热通量的数值分析
- 作者：Rajeshwar Sripada;N. Subaschandar;Veeredhi Vasudeva Rao
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
33.Optimization of Drilling Process in Heat-Treated Al-20 SiC Functionally Graded Composite Using Grey Relational Analysis

机译：用灰色关系分析优化热处理Al-20％SiC功能梯度复合材料的钻井过程
- 作者：K. Vinoth Babu;S. Prathap Singh;S. Marichamy;P. Ganesan;M. Uthayakumar
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Functionally graded materials;
- Heat treatment;
- Drilling;
- Grey relational analysis;
- ANOVA;
34.Study of 3D Hexagonal Membrane Structure for MEMS-Based Ultrasonic Transducer Using Finite Element Method

机译：基于MEMS的超声换能器使用有限元法研究3D六边形膜结构
- 作者：Reshmi Maity;N. P. Maity;K. Guha;K. Srinivasa Rao;K. Girija Sravani;S. Baishya
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- FEM;
- Finite element analysis (FEA);
- Ultrasonic transducer;
- CMUT;
- PZFlex;
35.Material Modeling of Particle Reinforced in Metal Matrix Composite

机译：金属基质复合材料中加固粒子的材料建模
- 作者：M. Sundarraj;R. Varatharajan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- FEA code;
- Particle distribution pattern;
- Metal matrix composite;
- Particulate mixture ratio;
36.Recent Application and Preservation of Bamboo as Sustainable Material

机译：竹子最近的应用与保存可持续材料
- 作者：Amol Ashok Kamble;Suppiah Subramaniam
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Sustainable material;
- Application of bamboo;
- Types of bamboo;
- Preservative technique;
- Properties of bamboo;
37.Experimental Study on Tyre Dynamics and Properties of Heavy Load Transporting Vehicle

机译：轮胎动力学与重载运输车辆的性能实验研究
- 作者：S. Balaguru;J. Venkataramana
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Rolling resistance;
- Energy consumption;
- Laden and unladen;
- Dynamics and test trails;
38.Design Optimization of Suspension and Steering Systems for Commercial Vehicles

机译：商用车辆悬架和转向系统的设计优化
- 作者：V. Vijaykumar;P. Anand
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Bump steer;
- Brake steer;
- Draglink;
39.A Review on the Enhancement of Heat Exchanging Process Using TiO_2 Nanofluids

机译：用TiO_2纳米流体提高热交换过程的综述
- 作者：M. Armstrong;M. Siva Subramanian;N. Selvapalam
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- TiO_2 nanoparticles;
- Base fluid;
- Heat exchanger;
- Heat transfer enhancement;
40.Reciprocating Wear Studies of Inconel 718 and Mod.9Cr-1Mo Ferritic Steel by Surface Profilometric Characterization

机译：通过表面轮廓表征往复718和MOD.9CR-1MO铁素体钢的往复磨损研究
- 作者：K. Adityan;N. L. Parthasarathi;P. Ashoka Varthanan;R. Priya;Utpal Borah
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Reciprocating wear;
- Inconel 718;
- 9Cr-1Mo;
- Profilometry;
41.Design and CFD Analysis of Wickless Heat Pipes Filled with Refrigerants as Working Fluids for HVAC Applications

机译：用于HVAC应用的制冷剂作为工作流体的无芯热管的设计和CFD分析
- 作者：B. Sivaramakrishnan;J. Selwin Rajadurai
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Heat pipes;
- Refrigerants;
- Computational fluid dynamics;
- ANSYS fluent;
42.Modeling of Flow-Induced Vibration Response of Heat Exchanger Tube with Fixed Supports in Cross Flow

机译：串流换热器具有固定支架的热交换器管的振动振动响应的建模
- 作者：Kore Someshwar Vishwanath;S. Balaguru
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Flow-induced vibration;
- Vortex shedding;
- Turbulent buffeting;
- Fluid elastic instability;
43.Design and Fabrication of Ocean Water Pumping and Storage System

机译：海水泵送和储存系统的设计与制作
- 作者：M. Muthukannan;S. Anantha Krishnan;Ajay Pratap Kushwaha
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Buoyancy;
- Efficiency;
- Potential energy;
- Wave energy;
44.Fatigue Crack Growth Behavior of a Nickel-Base Super Alloy Inconel 718 Under Spectrum Loads

机译：镍基超合金Inconel 718下的疲劳裂纹生长行为在频谱载荷下
- 作者：Sharanagouda G. Malipatil;Anuradha N. Majila;Chandru D. Fernando;C. M. Manjunatha;S. G. Malipatil
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Fatigue crack growth;
- Ni-base super alloy;
- Spectrum loads;
- Driving force;
45.Influence of Nanofluid and Inclination Angle on the Temperature Distribution of the Thermosyphon

机译：纳米流体和倾斜角度对热循环温度分布的影响
- 作者：Sidhartha Das;Asis Giri;S. Samanta
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- TiO_2 nanofluid;
- Wall temperature;
- Thermosyphon;
46.Investigation of Compressive Properties of Hybrid Aloe vera/Silica Nanoparticles Composite

机译：杂交芦荟/二氧化硅纳米粒子复合材料压缩性能研究
- 作者：R. Giridharan;S. J. Anirudh;S. Anirudh;M. P. Jenarthanan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Aloe vera fibers;
- Silica;
- Nanoparticles;
- Compressive properties;
47.Mechanical and Metallurgical Properties of Hybrid Composite Material

机译：杂化复合材料的机械和冶金性能
- 作者：V. Karthi;K. Marimuthu;G. Boopathy;N. Ramanan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Eco-friendly fiber;
- Hybrid composite;
- Fracture surfaces;
- Hand layup method;
48.Experimental Investigation of Twin Elliptic Orifice Using High Speed Jet Facility

机译：高速喷射设施双椭圆孔的实验研究
- 作者：S. Parameshwari;Pradeep Kumar;S. Thanigaiarasu;E. Rathakrishnan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Twin elliptic jet;
- Aspect ratio;
- Jet entrainment;
49.Characterization of Free Vibration Damping Properties in Hybrid Composites

机译：混合复合材料中自由振动阻尼性能的表征
- 作者：M. Dinesh;R. Asokan;S. Vignesh;Kommana Tarun Kumar;Nallamilli Sampath Kumar Reddy
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- A. hybrid composites;
- B. half bandwidth method;
- C. damping ratio;
- D. damped natural frequency;
50.A Study on Investigation of Tensile Properties of Aloe vera Fiber Reinforced Epoxy Composites

机译：芦荟纤维增强环氧复合材料的拉伸性能研究研究
- 作者：R. Giridharan;N. Anerudh;M. M. Mithun Srivan;M. P. Jenarthanan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Aloe vera;
- Epoxy resins;
- ASTM;
- Tensile properties;
- Fractography;
51.Numerical Investigation on Amphibious UAV Using Turbulent Models for Drag Reduction

机译：用湍流模型减少湍流模型的两栖无人机的数值研究
- 作者：P. Gokul Raj;Balasubramanian Esakki;P. Vikram;Lung-Jieh Yang
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Amphibious UAV;
- CFD;
- RANS model;
- Drag;
- Blunt body;
52.Energy Generation from Piezoelectric Material in Automobile

机译：汽车中压电材料的能量产生
- 作者：Aman Akotkar;Anand Kumar Sinsh;S. Jaichandar
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Piezoelectric material;
- Harness energy;
53.Evaluation of Microalgae Biodiesel Blend Along with DTBP as an Ignition Enhancer on Diesel Engine Attributes

机译：用DTBP作为柴油发动机属性点火增强剂的微藻生物柴油混合物评价
- 作者：A. Gurusamy;V. Gnanamoorthi;P. Purushothaman;P. Mebin Samuel;A. A. Muhammad Irfan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- DTBP;
- Biodiesel;
- Microalgae;
- Performance;
- Emission;
54.Effect of Aspect Ratio on the Buckling Load of Stiffened Circular Plates

机译：纵横比对加强圆形板屈曲负荷的影响
- 作者：V. Lakshmi Shireen Banu;Veeredhi Vasudeva Rao
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Buckling loads;
- Circular plates;
- Ring stiffeners;
- Aspect ratio;
- Thin shells;
55.High-Temperature Sliding Wear Characterization Studies of AISI 316 L(N) by Surface Profilometry

机译：表面轮廓测定法的高温滑动磨损表征AISI 316 L（n）的研究
- 作者：N. Aruldev;N. L. Parthasarathi;B. Rajasekaran;Utpal Borah
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- AISI 316 l(N);
- High temperature;
- Sliding wear;
- Profilometry;
56.Thermo Mechanical Analysis of Multipass Butt-Welded Joints by Finite Element Method

机译：有限元法测量多脂焊接接头的热机械分析
- 作者：T. Raja;P. Anand;M. Sundarraj;M. Karthick;A. Kannappan
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Dynamic temperature distribution;
- Residual stresses;
- Distortion;
- Butt-welded joints;
- ANSYS software;
57.Effect of Overhauling on the Performance of Boiler

机译：改革对锅炉性能的影响
- 作者：S. Jebarose Juliyana;J. Udaya Prakash;A. Divya Sadhana;K. Karthik
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- Thermal power plant;
- Boiler;
- Lignite;
- Efficiency;
- Overhauling;
58.Study of No_x Treatment with Selective Catalytic Reduction and Diesel Exhaust Fluid with Emphasis on Importance of Mixer in Flow

机译：选择性催化还原和柴油气排气流体的NO_X处理研究，重点搅拌机流动的重要性
- 作者：Ibraheem Raza Khan;Y. Lethwala;Aayush Chawla;S. Jaichandar
- 会议名称：《International Conference on Design, Materials, Cryogenics and Constructions》 | 2020年
- NO_x;
- Emission;
- SCR;
- Urea;
- NH_3;
- BS VI;