首页>外文会议>其他>6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA

6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Input Torque Based Thermal Model of Friction Stir Welding of Al-6061

机译：基于输入扭矩的Al-6061搅拌摩擦焊接热模型
- 作者：Mir Zahedul H. Khandkar;Jamil A. Khan;Anthony P. Reynolds
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
- friction stir welding;
- numerical analysis;
- Al-Alloys;
- thermal modeling;
- weld process simulation;
2.Improvement of Mechanical Properties in Thixomolded Mg Alloy AZ91D by Friction Stir Welding

机译：搅拌摩擦焊改善触变镁合金AZ91D的力学性能
- 作者：S. H. C. Park;Y. S. Sato;H. Kokawa;T. Tsukeda
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
3.Heat Input Comparison of STT vs. Short-Circuiting and Pulsed GMAW vs. CV Processes

机译：STT与短路，脉冲GMAW与CV工艺的热输入比较
- 作者：C. Hsu;P. Soltis
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
4.HAZ Properties of High Nitrogen Austenitic Stainless Steel

机译：高氮奥氏体不锈钢的热影响区性能
- 作者：Yoshihiro Sato;Tomoya Shiotsu;Kenjirou Uegami;Yasushi Kikuchi
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
5.VIRTUAL WELDED-JOINT DESIGN BY COUPLING THERMAL-METALLURGICAL-MECHANICAL MODELING

机译：通过热-金属-机械-模型耦合进行虚拟焊接接头设计
- 作者：Z. Yang;X. L. Chen;N. Chen;H. W. Ludewig;Z. Cao
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
6.Validation of Computed Weld Pool Temperature Profiles for GTA Welding of Gamma TiAl

机译：伽马TiAl的GTA焊接计算的熔池温度曲线的验证
- 作者：Kirtikumar B. Bisen;Mario F. Arenas;Nagy El-Kaddah;Viola L. Acoff
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
7.The Effect of the Welding Conditions on the Nugget Zone in Friction Stir Welds in an AA7010 Alloy

机译：焊接条件对AA7010合金搅拌摩擦焊熔核区的影响
- 作者：Kh. A.A. Hassan;A. F. Norman;P.B. Prangnell
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
8.The Application of a Microstructural Severity Rating System to Improve a Direct Drive Friction Weld Process

机译：显微结构严重等级评定系统在改进直接驱动摩擦焊接工艺中的应用
- 作者：D.F. Lansburg;K.E. Short
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
9.Study of Droplet Transfer Mechanism in GMAW

机译：GMAW中的液滴转移机理研究
- 作者：Z. Bingul;G. E. Cook;P. Koseeyaporn;A. M. Strauss
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
10.Transient Liquid Phase (TLP) Bonding of TiAl-Alloys: Wettability, Microstructure, Mechanical Properties and Potential for Automation

机译：TiAl合金的瞬时液相（TLP）键合：润湿性，微观结构，机械性能和自动化潜力
- 作者：D.A. Butts;W.F. Gale;T. Zhou
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
11.Weld Metal Design: From Flux Coating to Microstructure

机译：焊接金属设计：从焊剂涂层到微结构
- 作者：Stephen Liu;David L. Olson
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
12.Welding and Joining of high-performance car bodies

机译：高性能车身的焊接与连接
- 作者：Lars-Erik Svensson;Johnny K Larsson
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
13.The influence of Weld Pattern on the Welding Residual Stresses

机译：焊接方式对焊接残余应力的影响
- 作者：N. Enzinger;H. Cerjak
- 会议名称：《》 | 2002年
14.The Effects of Chloride Fluxes on the Gas Tungsten Arc Welding of an AZ21 Magnesium Alloy

机译：氯离子流量对AZ21镁合金钨极氩弧焊的影响
- 作者：M. Marya;G.R. Edwards
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
15.Three Dimensional Simulation of Robot path, Heat Transfer and Residual Stresses of a TIG-welded Part with Complex Geometry

机译：复杂几何形状的TIG焊接零件的机器人路径，传热和残余应力的三维模拟
- 作者：M. Ericsson;D. Berglund;P. Nylen
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
16.Thermal Cycle Effects on Alpha Case Characteristics in Titanium Welds

机译：热循环对钛焊缝中α态特征的影响
- 作者：Matt Robinson;John C. Lippold;Dennis D. Harwig;John Lawmon
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
17.Quantifying Ductility-Dip Cracking Susceptibility in Nickel-Base Weld Metals using the Strain-to-Fracture Test

机译：使用应变至断裂试验量化镍基焊接金属的延展性-浸裂敏感性
- 作者：M. G. Collins;J.C. Lippold;J.M. Kikel
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
18.Residual Stress Modification and Fatigue Life Enhancement

机译：残余应力改变和疲劳寿命提高
- 作者：H. J. Prask;T. Gnaeupel-Herold;V. Luzin;J. W. Fisher;X. Cheng;S. Roy
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
19.Modeling of Ferrite to Austenite Transformation and Real Time Mapping of Phases during GTA Welding of 1005 Steel

机译：1005钢GTA焊接过程中铁素体到奥氏体转变的建模和相的实时映射
- 作者：W. Zhang;J. W. Elmer;T. DebRoy
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
20.Metallurgical Characterization of Friction Stir Welded 7050-T74 and C458-T3 Aluminum Alloys

机译：搅拌摩擦焊接7050-T74和C458-T3铝合金的冶金特性
- 作者：K. K. Sankaran;R. J. Lederich;K. Jata;K. Rajan;D. Schwartz
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
21.Microstructural and mechanical effects of nickel and manganese on high strength steel weld metals

机译：镍和锰对高强度钢焊接金属的微观结构和力学影响
- 作者：E. Keehan;H. O. Andren;L. Karlsson;M. Murugananth;H. K. D. H. Bhadeshia
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
22.Microstructures and Toughness of Simulated HAZ in Quenched and Tempered, Low-Carbon, Ti-B Containing Steels

机译：淬火和回火低碳含Ti-B钢中模拟热影响区的组织和韧性
- 作者：Woong-Seong Chang;Byoung-Hyun Yoon;Kook-Soo Bang
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
23.Martensite transformation, microsegregation, and creep strength of 9 Cr-1 Mo-V steel weld metal

机译：9 Cr-1 Mo-V钢焊接金属的马氏体相变，微偏析和蠕变强度
- 作者：M. L. Santella;R. W. Swindeman;R. W. Reed;J. M. Tanzosh
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
24.Mapping Phase Transformations in the Heat-Affected-Zone of Carbon Manganese Steel Welds using Spatially Resolved X-Ray Diffraction

机译：利用空间分辨X射线衍射绘制碳锰钢焊缝热影响区中的相变图
- 作者：John W. Elmer;Joe Wong;Thorsten Ressler;Todd A. Palmer
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
25.Cooperative Research in Australia and its Focus on Welded Structures

机译：澳大利亚的合作研究及其对焊接结构的关注
- 作者：Colin Chipperfield;John Norrish;Frank Barbaro
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
26.Comparison of Deformation Pattern and Residual Stresses in Finite Element Models of a TIG-welded Stainless Steel Plate

机译：TIG焊接不锈钢板有限元模型中变形模式和残余应力的比较
- 作者：Daniel Berglund;Henrik Runnemalm
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
27.Intelligent Control of Modular Robotic Welding Cell

机译：模块化机器人焊接单元的智能控制
- 作者：Herschel B. Smartt;Kevin L. Kenney;Charles R. Tolle
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
28.Intelligent Arc Voltage Control

机译：智能电弧电压控制
- 作者：P. Koseeyaporn;P. Smithmaitrie;G. E. Cook;A. M. Strauss
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
- sensing;
- control and automation;
- welding processes;
- procedures;
- consumables;
29.Influence of Heat Input and Shielding-Gas Composition on Microstructures and Properties of Weld Metal of HSLA-100 Class Steel

机译：热量输入和保护气体组成对HSLA-100级钢焊接金属组织和性能的影响
- 作者：M.A. Gouda;M. Takahashi;T. Kuroda;K. Ikeuchi
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
30.Inclusion Growth in Yttrium Containing Low Alloy Steel Welds through Liquid Phase Sintering

机译：液相烧结法在含钇低合金钢焊缝中的夹杂物生长
- 作者：Marshal D. Clark;Glen R. Edwards
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
31.Improved Models for Predicting Ferrite Content in Stainless Steel Welds

机译：预测不锈钢焊缝中铁素体含量的改进模型
- 作者：J. M. Vitek;S. A. David
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
32.Reproduction of Ultra-Fine Grains in Equal Channel Angular Pressed Al Alloy 5083 by Friction Stir Process

机译：搅拌摩擦法在等通道转角挤压铝合金5083中超细晶粒的复制
- 作者：Y. S. Sato;M. Urata;H. Kokawa;K. Ikeda
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
33.Progress in Joining Austenitic Stainless Steels by Friction Stir Welding

机译：搅拌摩擦焊接奥氏体不锈钢的研究进展
- 作者：R Johnson;P L Threadgill
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
34.Precision and Efficiency Sensitivity of Some Key Techniques in Thermo-mechanical Numerical Simulation of Welding Process

机译：焊接过程热机械数值模拟中一些关键技术的精度和效率敏感性
- 作者：Qing-yu Shi;Anli Lu;Haiyan Zhao;Aiping Wu;Su Wu
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
- numerical simulation;
- efficiency and precision;
- adaptive mesh;
- parallel computing;
- temperature affected material property;
35.Optimization of Welding Parameters for GTAW Based Rapid Manufacturing

机译：基于GTAW的快速制造的焊接参数优化。
- 作者：Z. Jandric;Y. Z. Wang;R. Kovacevic
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
36.Optimization of Slag Systems for Ni-Base FCAW Consumables

机译：镍基FCAW耗材渣系统的优化
- 作者：R. Valiant;M. Fiedler;B. Buchmayr;W. Klagges;E. Perteneder
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
37.Oxidation Resistance of Transient Liquid Phase (TLP)-Bonded Gamma Titanium Aluminide

机译：瞬态液相键合的伽马钛铝化物的抗氧化性
- 作者：J.W. Fergus;T. Zhou;B. Dang;W.F. Gale
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
38.Novel Control Techniques for CO_2 shielded Gas Metal Arc Welding

机译：CO_2气体保护金属电弧焊的新型控制技术
- 作者：Dominic Cuiuri;John Norrish;Chris Cook
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
39.Nondestructive, In-Process Inspection of Inertia Friction Welding: An Investigation into a New Sensing Technique

机译：惯性摩擦焊接过程中的无损检测：一种新型传感技术的研究
- 作者：D.A. Hartman;M.J. Cola;V.R. Dave;N.G. Dozhier;R.W. Carpenter
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
40.Nonequilibrium solidification in Fe-C-Al-Mn steel welds

机译：Fe-C-Al-Mn钢焊缝中的非平衡凝固
- 作者：S. S. Babu;J. W. Elmer;S. A. David;M. Quintana
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
41.New Low-cost Camera Temperature Measurements Compared to Analogous Temperature State Simulations

机译：与模拟温度状态模拟相比，新型低成本照相机温度测量
- 作者：H. C. Kjeldsen;H. Holm;J. Klaestrup Kristensen
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
42.Nd:YAG Laser Plasma Powder Hybrid Welding of Austenitic Stainless Steels

机译：奥氏体不锈钢的Nd：YAG激光等离子粉末混合焊接
- 作者：Th. Boellinghaus;H. Schobbert
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
43.Monitoring and Control of Welding Processes An Underrated Requirement

机译：焊接过程的监视和控制要求被低估
- 作者：John Norrish
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
44.LASER WELD KEYHOLE DYNAMICS

机译：激光焊接小孔动力学
- 作者：M.H. Cho;D. Farson;Bahman Zoofan;J.Y. Lee;C.D. Yoo
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
45.Laser Micro-Welding: How Low Can We Go?

机译：激光微焊接：我们能走多低？
- 作者：G.A. Knorovsky;V.V. Semak;D.O. MacCallum
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
46.Is there evidence of determinism in droplet detachment within the gas metal arc welding process?

机译：在气体保护金属电弧焊过程中，是否存在确定液滴分离的确定性证据？
- 作者：Charles R. Tolle;Randall A. Laviolette;Herschel B. Smartt;Kevin L. Kenney;David P. Pace;John W. James;Arthur D. Watkins;Thomas Wood;Daphne L. Stoner
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
- GMAW;
- windowed Fourier analysis;
- ApEn;
- determinism;
47.Grain Growth in the Heat-Affected Zone of Ti-6Al-4V Welds: Measurements and Three Dimensional Monte Carlo Simulation

机译：Ti-6Al-4V焊缝热影响区的晶粒长大：测量和三维蒙特卡洛模拟
- 作者：S. Mishra;T. DebRoy
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
48.Formation Mechanism and Suppression of Welding Defects in 20 kW CO_2 Laser Welding

机译：20 kW CO_2激光焊接的形成机理及焊接缺陷的抑制
- 作者：S. Tsukamoto;I. Kawaguchi;T. Otani;G. Arakane;H. Honda
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
49.Finite Element Prediction of Residual Stresses in a Fillet Welded T-joint

机译：角焊T形接头残余应力的有限元预测
- 作者：Aihui Wu;Stavros Syngellakis;Brian Mellor
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
50.Effect of Filler Material Selection and Shrinkage Restraint on Stress Strain Build Up in Component Welds

机译：填充材料选择和收缩抑制对构件焊缝应力应变累积的影响
- 作者：Th. Boellinghaus;Th. Kannengiesser
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
51.Effect of minor elements on penetration depth in GTA welding

机译：微量元素对GTA焊接熔深的影响
- 作者：H.Fujii;H.Sugiyama;S.P.Lu;K.Yamashina;M.Tanaka;K.Nogi
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
52.Effect of Pin Tool Shape on Metal Flow During Friction Stir Welding

机译：搅拌摩擦焊接中销钉形状对金属流动的影响
- 作者：J.C. McClure;E. Coronado;S. Aloor;B. M. Nowak;L.E. Murr;A.C. Nunes
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
53.Effect of Twin-Induced Grain Boundary Engineering on Intergranular Corrosion in Austenitic Stainless Steel

机译：双相晶界工程对奥氏体不锈钢晶间腐蚀的影响
- 作者：Masayuki Shimada;Hiroyuki Kokawa;Zhan Jie Wang;Yutaka S. Sato
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
54.Energy based synergic pulsed MIG control system

机译：基于能量的协同脉冲MIG控制系统
- 作者：Gerd Huismann
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
55.Evaluation of Hydrogen Trapping for Hydrogen Management in Steel Welding

机译：氢捕集技术在钢焊接中氢管理的评价
- 作者：I. S. Maroef;D.L. Olson
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
56.Factors Affecting the Hydrogen Embrittlement Resistance of Ni-Cr-Mn-Nb Welds

机译：Ni-Cr-Mn-Nb焊缝耐氢脆性的影响因素
- 作者：G.A. Young;C.K. Battige;N. Lewis;M.A. Penik;J. Kikel;A.J. Silvia;C.K. McDonald
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
57.Friction Stir Welding Developments

机译：搅拌摩擦焊的发展
- 作者：W M Thomas;R E Dolby
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
58.Friction Stir Welding of Copper

机译：铜的搅拌摩擦焊
- 作者：Taru Hautaia;Tuomo Tiainen
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
59.Friction Welding of a Titanium Matrix Composite Ti-6AI-4V+10TiC

机译：钛基复合材料Ti-6AI-4V + 10％TiC的摩擦焊接
- 作者：Antonio A.M. da Silva;Axel Meyer;Jorge F. dos Santos;Carlos Kwietniewski;Telmo R. Strohaecker;Susan Abkowitz
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
60.A Point Infrared Sensing System for Weld Penetration Control in the Presence of Variable Plate Thickness and Variable Joint Gap

机译：可变板厚和可变缝隙存在的点焊红外控制点焊系统
- 作者：Haibo Fan;Srikanth Kottilingam;Bryan A. Chin
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
61.ALLOYING EFFECTS ON PROPERTIES OF WELDS MADE WITH HIGH STRENGTH CELLULOSIC ELECTRODES

机译：合金化对高强度纤维素电极焊缝性能的影响
- 作者：Craig Dallam;Badri Narayanan;Marie Quintana
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
62.Anode Heat Transfer in GTA Welding

机译：GTA焊接中的阳极传热
- 作者：Hidenori Terasaki;Manabu Tanaka;Hidetoshi Fujii;Masao Ushio
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
63.Analysis of Friction Stir Welds Using the Inverse-Problem Approach

机译：用反问题方法分析搅拌摩擦焊
- 作者：S.G. Lambrakos;R.W. Fonda;J.O. Milewski;J.E. Mitchell
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
64.Combined Welding Arcs and Weld Profile Modeling

机译：组合焊接弧和焊接轮廓建模
- 作者：Ahmed Kaddani;Dick Skarin;Wei Ji;Ulrike Windecker;Pavel Lemarinier;Mikael Svensson
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
65.Columnar-to-Equiaxed Transition during Solidification of Steel Welds

机译：钢焊缝凝固过程中的柱状到等轴转变
- 作者：T. Koseki;H. Inoue;A. Nogami;Y. Fukuda
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
66.Basic Aspects of Weldability of Engineering Materials

机译：工程材料可焊性的基本方面
- 作者：Horst H. Cerjak
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
67.Cold Cracking and Segregation in Multi-Pass Welds of a Quenched and Tempered Steel

机译：调质钢多道次焊缝中的冷裂纹和偏析
- 作者：G. L. F. Powell;I. H. Brown;V. M. Linton;J. L. Davidson
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
68.Components of the Creep Strength of Welds

机译：焊缝蠕变强度的组成部分
- 作者：M. Murugananth;H.K.D.H. Bhadeshia
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
69.Complex Weldment Properties Trends in Predictive Power

机译：预测功率的复杂焊接特性趋势
- 作者：H. K. D. H. Bhadeshia
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
70.Diffraction Strain Measurements for the Characterization of Residual Stresses in Welds for Gas Turbine Applications

机译：表征燃气涡轮焊接中残余应力的衍射应变测量
- 作者：D. Dye;K. T. Conlon;R. C. Reed;K. E. James;A. M. Korsunsky
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
71.Dimensionless Relationships for the Keyhole Weld Characteristics in AZ80 Magnesium Alloy

机译：AZ80镁合金锁孔焊接特性的无量纲关系
- 作者：M. Marya;G.R. Edwards
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
72.Dissimilar Alloy Electron Beam Welding of Aluminum: Al-6061 to Al-1050

机译：铝的异种合金电子束焊接：Al-6061至Al-1050
- 作者：I .Dahan;E. Dabush;A.Stern;D. Eiliezer
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年
73.Delayed Cracking in Simulated Naval Platform Repair Welds

机译：模拟海军平台维修焊缝中的延迟裂纹
- 作者：N. Pussegoda;A. Dinovitzer;B. Xu;B.A. Graville;C. Hyatt
- 会议名称：《6th International Conference on Trends in Welding Research Apr 15-19, 2002 Phoenix, Arizona USA》 | 2002年