首页>外文会议>其他>International Conference on Energy and the Future of Heat Threatment and Surface Engineering

International Conference on Energy and the Future of Heat Threatment and Surface Engineering

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Research progress on laser surface engineering

机译：激光表面工程研究进展
- 作者：LI Wenge;ZHANG Guangjun;HU Zhaowei;WU Qianlin;WANG Guoqing
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- laser surfacemodifying;
- nanosurface engineering;
- refabricating;
- complex treatment;
- intelligentmanufacturing;
- flexiblemanufacturing;
- excimer laser;
2.Microstructures and strengthening effect of heterogeneous precipitation in 2024 aluminum alloy

机译：2024铝合金异质沉淀的微观结构及加强效应
- 作者：YANG Yanqing;FENG Zongqiang;LI Maohua;CHEN Yanxia;HUANG Bin
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Aluminum alloy;
- heterogeneous precipitation;
- HRTEM;
- strengthening;
3.Rare-earth surface engineering in China

机译：中国稀土地面工程
- 作者：WANG You;YAN Mufu
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
4.Numerical simulation of quenching process of ultra high strength low alloy components

机译：超高强度低合金成分淬火过程的数值模拟
- 作者：SHI Wei;LIN Xiaohui;ZHANG Xin
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Quenching;
- Numerical Simulation;
- Ultra High Strength Steel;
- Phase Transformation;
5.New ways—new technology—new topics of energy saving in heat treatment processes of metal

机译：新的方式 - 新技术 - 金属热处理过程中节能的新主题
- 作者：CANG Daqiang;ZHANG Lingling;ZONG Yanbing
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- metal heat treatment;
- new ways;
- new technology;
- new research topics;
6.Rapid degradation of azo dye waste water by iron-based amorphous alloys through surface plating

机译：通过表面电镀通过铁基无定形合金快速降解氮杂染料废水
- 作者：TANG Yao;YAO Kefu
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Iron-based amorphous alloys;
- Surface Plating;
- Degradation;
- Azo dyes;
7.Abrasive wear resistance of V-Cr sci alloys

机译：V-Cr SCI合金的磨料耐磨性
- 作者：K.Shimizu;A.Cheiliakh;V.Efremenko;T.Kozarevskaya;K.Kusumoto;K.Yamamoto;Yu.Chabak
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
8.Surface hardening of cold work tool steels as an energy efficient alternative to furnace heat treatment

机译：冷加工工具钢的表面硬化作为炉热处理的节能替代品
- 作者：Reinhold S.E.Schneider
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- tool steels;
- heat treatment;
- surface hardening;
9.Study on application of quenching of high pressure nitrogen

机译：淬火高压氮的应用研究
- 作者：LI Jingmin;HUANG Wenrong;HUANG Shuke;LI Changan;SHI wei
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- nitrogen;
- quenching;
- cooling character;
- nitrogen;
10.Investigation of effect of ' 6-α' transformation during homogenization heat treatment on fracture of intermetallic particles in Al-Mn-Mg alloy

机译：均质化热处理过程中“6-α”转化对铝金属间颗粒骨折的影响
- 作者：ZHANG Yonghao;LIU Qing;HUANG Wenrong;HUANG Shuke
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Al-Mn-Mg alloy;
- homogenization heat treatment;
- 6-α transformation;
- Al spot;
- fracture;
11.Microstructure effects on tensile brittleness of as-quenched ZL205A in elevated temperature

机译：升高温度下淬火ZL205A拉伸脆性的微观结构作用
- 作者：WANG Wenguang;GUO Guannan;WANG Gang;RONG Yiming
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- solution quenching;
- tensile brittleness;
- aluminum alloy;
- nicrostructure;
12.The Short-term High Temperature Tensile Properties of 45CrNiMo1VA Ultra-high strength Steel

机译：45crnimo1VA超高强度钢的短期高温拉伸性能
- 作者：WU Yiping;YAO Chunchen;WU Zhiwei;BIN Lu;ZUO Yue;WEN Wei
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Ultra-high strength steel;
- heat treatment;
- high temperature tensile property;
- physical-chemical testing;
13.Fracture Failure analysis of automobile half-shaft

机译：汽车半轴断裂衰竭分析
- 作者：JIN Linkui;WANG Chunliang;QI Biao
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- intermediate frequency quenching;
- critical cooling rate;
- stress cracking;
- fatigue fracture;
14.Failure analysis of automotive half shaft casing crack

机译：汽车半轴壳裂纹的故障分析
- 作者：JIN Linkui;WANG Chunliang;QI Biao
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- high temperature oxide;
- total decarburized layer depth of welding crack;
- folding;
15.Effect of iron on the dry friction and wear characteristics of copper-based brake lining

机译：铁对铜型制动衬片干摩擦磨损特性的影响
- 作者：HAN Dan;CHEN Hua
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- copper-based;
- iron content;
- brake lining;
- dry friction;
16.Microstructure of hot-dipped Zn-Ti-Al coating

机译：热浸锌矿涂层的微观结构
- 作者：WANG Shengmin;HUANG Guoxiong;ZHAO Xiaojun;HE Mingyi;TAN Rong
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- hot dip galvanizing;
- Zn-Ti-Al coating;
- microstructure;
- galvanizing;
17.Effect of hot rolled grain size on the nitride precipitation and recrystallisation in cold rolled aluminium-killed steel casting production

机译：热轧粒度对冷轧铝灭火生产中氮化物沉淀及重结晶的影响
- 作者：András Mucsi
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- nitride precipitation;
- finish rolling temperature;
- grain size effect;
- recrystallisation;
18.Grain growth kinetics behavior of SiCp reinforced Mg matrix composite during thermal treatment process

机译：热处理过程中SICP增强MG基质复合材料的晶粒生长动力学行为
- 作者：DENG K.K.;LI J.C.;NIE K.B.
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- magnesium matrix composite;
- thermal treatment;
- SiCp;
- grain growth;
- active energy;
19.Integration of the 'Sub Zero'-treatment into vacuum hardening processes and subsequent advantages

机译：将“亚零” - 处理成真空硬化过程和随后的优点
- 作者：B.Zieger
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
20.Failure analysis and thermochemical surface engineering of bearings for wind turbine drivetrains

机译：风力涡轮机驱动器轴承的故障分析与热化学表面工程
- 作者：Ole H.E.West;Kristian V.Dahl;Thomas L.Christiansen;Marcel A.J.Somers
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- white etching cracks;
- bearings;
- wind turbine drivetrain;
- nitriding;
- rolling contact fatigue;
21.Influence of heat treatment on properties of Ni-W-P/Re-Al2O3 composites prepared by ultrasonic pulse electrodeposition

机译：热处理对超声波脉冲电沉积制备的Ni-W-P / RE-AL2O3复合材料性能的影响
- 作者：WANG Bingying;YU Jun;HOU Zhenbo
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- heat treatment;
- composite;
- pulse electrodeposition;
- corrosion resistance;
22.Studying the effect of annealing temperature on Hf and characteristic of restraining electron emission

机译：研究退火温度对抑制电子发射的HF和特征的影响
- 作者：MA TianJun;YU ShiJi;FANG YouWei;SUN JianHai;YI FuTing;LIU PuKun
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Grid emission;
- Secondary electron emission;
- Hf;
- Annealing;
- Texture;
23.Characterization of heat transfer during quenching by using optimization techniques

机译：利用优化技术表征淬火期间的传热
- 作者：Imre Felde;Maria Kocsis Baán;Wei Shi
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- inverse heat transfer problem;
- optimization;
- NSGAⅡ;
- hybrid approach;
24.Liquid quenchant database

机译：液体淬火剂数据库
- 作者：Imre Felde
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- liquid quenchant;
- ISO 9950;
- IHCP;
- heat transfer coefficient;
25.Study of the microstructure and orientation formed in M50 steel melted by high current pulsed electron beam treatment

机译：高电流脉冲电子束处理熔融M50钢的微观结构和取向研究
- 作者：XU Fangjun;TANG Guangze;MA Xinxin;DENG Kunkun;NIE Kaibo
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- electron beam irradiation;
- M50 steel;
- EBSD;
26.Study on Pitting corrosion of HIPed Stellite 12

机译：臀部旋转腐蚀的研究
- 作者：CHE Hongyan;LIU Guohui;Donghao;LIU Huiyuan;WANG Tiejun
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- pitting corrosion;
- HIP;
- ST12;
- AES;
27.Stress relaxation behavior for low alloy heat resistance steel

机译：低合金耐热性钢的应力松弛行为
- 作者：WANG Hang;XIE Bin;TIAN Zhi-hua;HAN Lihong;TIAN Tao
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Thermal well;
- thermal casing;
- stress relaxation;
- creep;
28.Mechanical and chemical effects of Mo powder in the milling process

机译：Mo粉末在铣削过程中的机械和化学作用
- 作者：GUO Tieming;JIN Shuo;JI Ruifang;FU Ying;TANG Zhong-jie
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Mo powder;
- wet milling;
- mechanical and chemical effect;
- nano-particles;
29.Microstructure of PBII carbonitrided layer of M50 steel

机译：M50钢的PBII碳氮层的微观结构
- 作者：LI Zhongwen;XU Fangjun;TANG Guangze;MA Xinxin
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- M50 steel;
- PBII carbonitriding;
- microstructure;
30.The analysis of the temperature field of 430 ferrite stainless steel in water-cooling condition with 3D-CAFE method

机译：3D-CAFE方法分析430铁氧体不锈钢温度场温度场
- 作者：PANG Ruipeng;WANG Fuming;LI Changrong;ZHANG Guoqing
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- 3D-CAFE;
- the solidification front;
- solid-liquid region;
31.The Effect of Surface Pretreatment on the Bioactive Glass Coating on Titanium Alloys

机译：表面预处理对钛合金生物活性玻璃涂层的影响
- 作者：JU Yinyan;WAN Jiangtao;SONG Jieguang;WANG Fang;JING Haixia
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- bioactive glass coating;
- surface pretreatment;
- titanium alloy;
- sol-gel;
- dip-coating;
32.Effect of Processing on Microstructures and Properties in Cr Hot-Stamping Steel

机译：加工对Cr热冲压钢组织和性能的影响
- 作者：ZHOU H.;ZHU G.;Q.L;CHEN Q.
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- hot-stamping;
- microstructure;
- heat treatment;
- properties;
33.Preparation of Cu coated TiC powders by electroless plating with a simplified pretreatment

机译：用简化的预处理用无电镀制备Cu涂层TiC粉末
- 作者：LU Zelong;LUO Laima;HUANG Xinmin;TAN Xiaoyue;DING Xiaoyu;CHENG Jigui;Liu Zhu;WU Yucheng
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- electroless plating;
- Cu-coated TiC;
- surface defects;
34.Comparative study of thin films by magnetron sputtering different phase structure Ti33Al67 targets

机译：磁控溅射不同相结构Ti33Al67靶的薄膜对比研究
- 作者：MU Jiangang;WANG Tiejun;ZHAO Dongliang;LIANG Juncai;ZHANG Fengge;ZHOU Wuping
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- film;
- sputtering target;
- growth mechanism;
- phase structure;
35.Research on Carburizing-Quenching Hardness Simulation of 17CrNiMo6 Inner Gear Ring

机译：17Crnimo6内齿轮环的渗碳淬火硬度模拟研究
- 作者：ZHANG Xing;TANG Jinyuan;ZHANG Xuerui
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- 17CrNiMo6 inner gear ring;
- carburizing-quenching simulation;
- hardness simulation;
36.Pretreatment Process of electroless Ni-P plating on magnesium alloys

机译：镁合金电镀Ni-P电镀的预处理过程
- 作者：HU Jianwen;MA Jing;ZHANG Xian
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- AZ91HP magnesium alloy;
- electroless Ni-P plating;
- pickling;
- activating;
37.Wear Resistance and Corrosion Resistance of W-Mo Co-penetrated Layer on Pure Titanium by Glow Discharge

机译：通过发光放电耐磨钛W-Mo共穿孔层的耐磨性和耐腐蚀性
- 作者：ZHAO Yun;ZENG Yun;LIU Weiguang;CHEN Fei;ZHOU Hai
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- commercial pure titanium;
- glow discharge;
- W-Mo co-penetrated layer;
- wear resistance;
- corrosion resistance;
38.The Influence of Nd addition on the mechanical properties of AM60 Magnesium Alloy and Its strengthen Mechanism

机译：ND添加对AM60镁合金力学性能的影响及其加强机理
- 作者：ZHANG Jinling;LIU Yangli;WANG Shebin;XU Bingshe
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- AM60 alloys;
- mechanical;
- microstructure;
39.Low-temperature mechanical properties of 08Ni3D forged steel after heat treatment

机译：08NI3D锻钢后低温力学性能热处理后
- 作者：ZHANG Zhonghe;MA Guojun;WANG Feiyu;ZHANG Erkang;NIU Shan;GUO Yang;WANG Zhiqiang;HAO Chunna
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- low-temperature tensile;
- low-temperature impact;
- forged 08Ni3D;
- Metallurgical microstructure;
- SEM fracture morphology;
40.Study on heat treatment of satellite 6 precisely casted cobalt base superalloy

机译：卫星6精确铸造钴基超合金热处理研究
- 作者：LI Haisong;YANG Ming;LIU Yanling;HE Qungong;GONG Xiufang;YANG Gongxian
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- JMatPro;
- cobalt-based superalloy;
- Stellite 6;
- precision casting;
- heat treatment;
41.Ultrasonic irradiation assisted electroplated Ni coating on carbon steel

机译：超声辐射辅助电镀Ni涂层碳钢
- 作者：BAN Chaolei;ZHU Shuqin;SHAO Xin;JIA Zhengfeng
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- ultrasonic irradiation;
- electroplating;
- mechanical attrition;
- Ni coating;
- corrosion resistance;
42.CGHAZ-CCT diagram of a Mo-free Nb-contained microalloyed pipeline steel

机译：CGHAZ-CCT图的无马达NB的微合金管钢
- 作者：ZHENG Yanan;HE Yanming;WANG Yuhui;LIU Ligang;WANG Tiansheng;LIAO Bo
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
43.Preparation and thermal stability of black ceramic coatings on Ti alloys by micro arc oxidation

机译：微电弧氧化在Ti合金上的黑色陶瓷涂层的制备与热稳定性
- 作者：YAO Zhongping;JU Pengfei;HU Bing;CHEN Changju;SU Peibo;JIANG Zhaohua
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- black ceramic coatings;
- micro arc oxidation;
- Ti alloys;
- thermal stabilit;
44.Effects of ageing temperature on reverse martensite to austenite transformation in a low carbon martensitic precipitation hardening stainless steel

机译：衰老温度对低碳马氏体沉淀硬化不锈钢逆转马氏体对奥氏体转化的影响
- 作者：XU Wen-bo;SHI Wei;WANG Gang
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Ageing;
- Reverse transformation;
- Transformation kinetics;
- Martensitic stainless steel;
45.Hot deformation behavior and mathematical model of 316L stainless steel

机译：316L不锈钢的热变形行为和数学模型
- 作者：SONG Congfei;YU Zhiqiang;TUO Leifeng;ZHOU Genshu
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- 316L stainless steel;
- hot deformation;
- true stress-strain curves;
- constitutive model;
46.The feature and formation mechanism of inclusions in K4169 Ni-base superalloy by VIM

机译：Vim K4169 Ni-Base高温合金中夹杂物的特征和形成机制
- 作者：GUO Tieming;TANG Zhongjie;KOU Shengzhong;FU Ying;JIN Shuo
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- VIM;
- Ni-base superalloy;
- K4169;
- inclusions;
47.Influence of Different Greases on the Wear Performance of Solid Expandable Pipe Materials

机译：不同润滑脂对固体可膨胀管材料磨损性能的影响
- 作者：LIU Qiang;TIAN Feng;LV Yi-yi;SONG Sheng-yin;BAI Qiang
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- SET;
- wear performance;
- greases;
- friction coefficient;
- wear mechanism;
48.Creep rupture strength of F12 steel welded joint after long-term service

机译：长期服务后F12钢焊接接头的蠕变破裂强度
- 作者：LI Xinmei;ZHANG Zhongwen;ZOU Yong;WEI Yuzhong;ZHANG Duqing
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- run : F12 steel;
- creep rupture strength;
- precipitated phase;
49.Microstructure and property of Ni/Co/Al2O3 laser cladding layer on the surface of mold copper plate

机译：模具铜板表面Ni / Co / Al2O3激光覆层层的微观结构和性能
- 作者：WANG Yiyong;SU Jianming;ZHANG Junwei;JIN Hui
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- mold copper plate;
- laser cladding;
- Ni/Co/Al2O3 composite coatings;
- microstructure;
50.Microstructure and impact toughness of P92 steel weld metal after exposure to high temperature service for 8000 hours

机译：P92钢焊接金属暴露于高温服务后的微观结构和冲击韧性8000小时
- 作者：ZHANG Zhongwen;LIU Rui;DU Baoshuai;LI Xinmei
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- P92 steel;
- weld metal;
- microstructure;
- impact toughness;
51.Effect and mechanism of heat treatment temperature on microstructure and mechanical properties of 0Cr16Ni5Mo martensitic stainless steel

机译：热处理温度对0Cr16Ni5MO马氏体不锈钢微观结构和力学性能的影响及机理
- 作者：SUN Yongqing;GONG Xuehui;LIANG Jianxiong;LIU Zhenbao;YANG Zhiyong
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- stainless steel;
- heat treatment;
- microstructure analysis;
- mechanical behavior;
- retained austenite;
52.Temperature-dependent IHTC property for oxidation micro-layer of 22MnB5 in hot stamping process

机译：温度依赖性IHTC用于氧化微层22MnB5的热冲压过程
- 作者：YING L.;LI Y.;XU Y.Z.;YE Y.;HU P.;ZHANG L.W.
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Hot Stamping;
- Oxide layer;
- Interfacial Heat Transfer Coefficient;
- Beck method;
53.Interdiffusion of Al-Cr coatings and SUS 430 stainless steel substrate

机译：Al-Cr涂层和SUS 430不锈钢基板的相互扩展
- 作者：ZHANG Min;Setsuko Koura;XU Bajin;XUE Dongpeng;LING Guoping
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Al-Cr-Fe Coating;
- interdiffusion;
- ionic liquid;
- heat treatment;
54.The formation and elimination of defects of alloying surface irradiated by high current pulsed electron beam

机译：高电流脉冲电子束照射的合金表面缺陷的形成和消除
- 作者：LUO Dian;GU Le;TANG Guangze;MA Xinxin;WANG Liqin;MA Tingtao
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- High current electron beam;
- surface alloying;
- defects;
55.Preparation of a novel yellow ceramic coating on Ti alloys by plasma electrolytic oxidation

机译：等离子体电解氧化在Ti合金上的新型黄色陶瓷涂层的制备
- 作者：YAO Zhongping;HU Bing;JU Pengfei;SU Peibo;JIANG Zhaohua
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- yellow ceramic coatings;
- Ti alloys;
- plasma electrolytic oxidation;
- heat stability;
56.Research on organization and performance of Mo reinforced copper matrix nanocomposites prepared by Thermite reaction

机译：热试反应制备的Mo加固铜基质纳米复合材料的组织与性能研究
- 作者：GUO Tieming;FU Ying;TANG Zhongjie;JIN Shuo;JI Ruifang
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
57.Microstructure and Mechanical Property study of HIPed Nickel-based self-fluxing alloy claddings

机译：基于邻镍自助金合金包层的微观结构与力学研究
- 作者：LIN Tongwei;LIU Huiyuan;ZHENG Bingkun;ZHANG Yuexiang;CHE Hongyan;DONG Hao;XIONG Ning;LIU Guohui;WANG Tiejun;ZHOU Wuping
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- self-fluxing alloy;
- HIP;
- cladding;
- bending strength;
58.Effects of solution treatment on the biocorrosion properties of Mg-2Nd-0.5Zn-0.4Zr-1Y magnesium alloy

机译：溶液处理对Mg-2ND-0.5Zn-0.4Zr-1Y镁合金生物腐蚀性能的影响
- 作者：CHENG Dandan;WEN Jiuba;HE Junguang
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- solution treatment;
- biodegradable magnesium alloy;
- biocorrosion properties;
- electrochemical properties;
59.Influence of heat treatment on the microstructure, surface roughness and corrosion resistance of martensitic stainless steel

机译：热处理对马氏体不锈钢微观结构，表面粗糙度和耐腐蚀的影响
- 作者：LU Siyuan;CHEN Yunbo;YAO Kefu
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- martensitic stainless steel;
- heat treatment;
- hardness;
- surface roughness;
- corrosion resistance;
60.In-situ fabrication of surface alloying layer on iron plate subjected to surface mechanical attrition treatment

机译：原位制造表面合金层在铁板上进行表面机械磨损处理
- 作者：HOU Li-feng;HOU Limin;LI Zhilong;DU Hua-yun;WEI Ying-hui;XU Bingshe
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- intermetallic compound;
- surface mechanical attrition treatment (SMAT);
- diffusion;
61.In situ observation fracture propagation of freestanding ultra thin buckling tungsten film

机译：原位观察骨折自由控制超薄弯曲钨膜的裂缝繁殖
- 作者：ZHANG Yuefei;WANG Fei;ZANG Peng;LU Junxia
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- thin film;
- buckling;
- residual stress;
- in situ TEM;
- crack propagation;
- nanocrystalline material;
62.Enhanced Wear and Corrosion Resistance of Plasma Electrolytic Carburized Layer on T8 Carbon Steel

机译：在T8碳钢上提高等离子体电解渗碳层的耐磨性和耐腐蚀性
- 作者：WU Jie;JIN Xiaoyue;LIU Run;WANG Bin;HUA Ming;XUE Wenbin
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- plasma electrolytic carburizing;
- carbon steel;
- wear resistance;
- corrosion resistance;
63.Sputtering Characteristics in High Power Pulsed Diode Sputtering

机译：高功率脉冲二极管溅射中的溅射特性
- 作者：ZHEN Shuying;MU Mingchuan;TANG Guangze;KEN Yukimura;MA Xinxin
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- HIPMS diode sputtering;
- sputtering characteristic;
- plasma density;
64.Optimization of chemical milling solution for 2219 aluminum alloy

机译：2219铝合金化学铣削液的优化
- 作者：LI Qiushi;WANG Jihui;HU Wenbin
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Chemical milling;
- 2219 aluminum alloy;
- Multi-index analysis;
- Optimization;
65.Finite element modeling and experimental verification of nitriding process in S30C steel

机译：S30C钢氮化过程的有限元建模与实验验证
- 作者：DENG Xiaohu;JU Dongying
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- COSMAP;
- Nitriding;
- S30C;
- iron nitride;
- inverse distance wieghting;
66.Research of solid solution treatment process like in air-cushion furnace for 6016 aluminum alloy auto body sheet

机译：6016铝合金汽车车身板气垫炉固体溶液处理过程的研究
- 作者：LI Yong;AN Xiao Xue;WANG Zhao Dong;GAO Guang Jun;FU Tian Liang;LI Jia Dong;HE Chen
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- aluminum alloy auto body sheet (ABS);
- 6016;
- solid solution treatment;
- formability;
- bake hardening ability;
67.Preparation and characterization of the micro-arc oxidation composite coatings on magnesium alloys forautomobile

机译：制备及表征镁合金以摩洛哥镁合金的微弧氧化复合涂层
- 作者：WANG Congjie;JIANG Bailing;GE Yanfeng
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- AZ91D;
- micro-arc oxidation;
- composite coatings;
- microstructure;
- corrosion resistance;
68.Local surface melting of nodular cast iron

机译：结节性铸铁的局部表面熔化
- 作者：Mihaly Reger;Imre Felde;Andras Mucsi
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- nodular cast iron;
- laser treatment;
- local melting;
- mathematical modeling;
69.A New Dimensionless Function to Refine Reverse Analysis in Nanoindentation of Al0.75CoCrFeNi High-entropy Alloys

机译：一种新的无量纲功能，以改进AL0.75 CoCeni高熵合金的纳米内狭窄的反向分析
- 作者：JIAO Zhiming;CHENG Li;MA Shengguo;WANG Zhihua;QIAO Junwei;XU B.S.
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- nanoindentation;
- dimensionless function;
- strain rate;
- high-entropy alloys;
70.Microstructure instability at surface of Ni-base superalloys during solution heat treatment

机译：溶液热处理期间Ni基超合金表面的微观结构不稳定性
- 作者：DONG H.B.
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
71.New developments and orientation in materials science-effect on surface engineering

机译：材料科学效应的新发展与方向
- 作者：Zoltan Kolozsvary
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
72.Laser surface melting in liquid nitrogen of AZ31B magnesium alloy for microhardness and corrosion resistance improvement

机译：AZ31B镁合金液氮激光表面熔化，用于显微硬度和耐腐蚀改善
- 作者：CUI Zeqin;SHI Haixia;WANG Wangxian;XU Bingshe
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- magnesium alloy;
- laser surface melting;
- liquid nitrogen;
- microhardness;
- corrosion resistance;
73.Determination of Flow Curves for all Microstructural Constituents of SAE 52100 Bearing Steel for Heat Treatment Simulation

机译：用于热处理模拟SAE 52100轴承钢的所有微结构成分的流动曲线的测定
- 作者：Ozan M(US)TAK;Caner (S)iM(S)iR;Kemal DAVUT;C.Hakan G(U)R
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- flow curve;
- SAE 52100;
- deformation dilatometry;
- heat treatment;
- simulation;
74.Study on Crystallographic Texture in Compound Layer Produced during Plasma Nitriding of Steels

机译：钢等离子体氮化过程中晶体层晶体纹理研究
- 作者：WANG Y X;YAN M F;ZHANG C S;BAI B;CHEN L;LONG Z;LI R W
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- preferred orientation;
- crystal structure;
- first principles calculation;
- plasma nitriding;
75.Study on surface morphologies and electro-catalytic activity of IrO2 + MnO2 coatings on Titanium substrates of different surface roughness

机译：不同表面粗糙度钛基材上IRO2 + MNO2涂层表面形态和电催化活性的研究
- 作者：XIE Qiuxia;YE Zhiguo;LIU Lei;MENG Huimin;FAN Qingguo;HUANG Guangbin
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- IrO2 + MnO2 coating;
- IrO2 nano-poles;
- sand-blasting;
- polishing;
- electro-catalytic activity;
76.Phase field study on evolution of carbides in surface layer of 20Cr2Ni4A steel gas carburized with rare earth addition

机译：20Cr2Ni4A钢气表面层碳化物碳化碳化物渗碳的相位研究
- 作者：ZHANG C S;YAN M F;WANG Y X;YOU Y;CHEN H T;BAI B;CHEN L;LONG Z;LI R W
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- Phase field model;
- Rare earth;
- Carburizing;
- Microstructural refinement;
- 20Cr2Ni4 steel;
77.Nitrogen-related optical centers in natural and synthetic diamond

机译：与自然和合成钻石相关的氮气相关光学中心
- 作者：LIU Sheng;LI Chengming;CHEN Liangxian;LIU Jin-long;WEI Junjun;HEI Lifu;LU Fanxiu
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- diamond;
- nitrogen-related;
- optical centers;
- application;
- heat treatment;
78.Effects of vacuum pre-oxidation process on the thermally grown oxides layer of CoCrAlY high temperature corrosion resistance coating

机译：真空预氧化过程对可传热高温耐腐蚀涂层热生长氧化物层的影响
- 作者：HAN Yujun;YE Fuxing
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
79.Highly efficient gas nitriding using atmosphere control and computational process simulation

机译：使用大气控制和计算过程模拟高效气体氮化
- 作者：Youichi Watanabe
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- gas nitriding;
- nitrogen;
- atmospherecontrol;
- nitrogen potential;
- compound layer;
- γ'-phase;
- ε-phase;
- nitride;
- low-alloy steel;
- simulation;
80.Failure mechanism of quenchant

机译：猝灭剂的失效机制
- 作者：CHEN C.H.
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- failure mechanism;
- quenching;
- quenchant;
81.Effect of dislocation multiplication on surface strengthening mechanism of laser shock processed aluminum alloy 2A02

机译：脱位倍增对激光冲击加工铝合金2A02表面强化机理的影响
- 作者：LUO Xinmin;ZHANG Jingwen;CHEN Kangmin;LUO Kaiyu;REN Xudong;LU Jinzhong
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- laser shock processing;
- aluminum alloy;
- microstructure;
- dislocation;
- nano-crystalline;
82.Study of impact resistance and high hardenability of G8SiMnMoVRE

机译：G8SIMNMOVRE抗冲击性和高耐淬耐性研究
- 作者：TAO Huifang;XU Yun;HAO Peng;LI Wenqing;TAO Zhian
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- martensite grading quenching;
- bainite grading quenching;
- hardenability;
- impact resistance;
- strength of extension;
83.Heat treatment and surface engineering using safer and cleaner practices, better energy efficiency and limited environmental impact processes

机译：使用更安全和更清洁的实践，更好的能效和有限的环境影响过程进行热处理和表面工程
- 作者：Patrick JACQUOT
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- heat treatment;
- surface engineering;
- energy efficiency;
- environmental impact;
- low pressure carburising;
- solvent degreasing;
- cleaning;
- gas quenching;
- nitriding;
84.Microstructure evolution and mechanical properties of X12CrMoWVNbN10-1-1 steel during heat treatment

机译：热处理过程中X12Crmowvnbn10-1-1钢的微观结构演化与力学性能
- 作者：TAO Xingang;LI Chuanwei;HAN Lizhan;GU Jianfeng
- 会议名称：《International Conference on Energy and the Future of Heat Threatment and Surface Engineering》 | 2014年
- microstructure evolution;
- mechanical property;
- X12CrMoWVNbN10-1-1 steel;
- heat treatment;