首页>外文会议>其他>IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications

IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Trends in Asset Monitoring and Prognostics

机译：资产监测和预测的趋势
- 作者：Wenyu Zhao;Edzel Lapira;Lodovico Menozzi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
2.Development of coating thickness gauge for magnetic coatings

机译：磁涂料涂层厚度计的开发
- 作者：Jae-Hwa Hong;Jung Hun Park
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
3.Using Giant Magneto-Resistance Sensors in Remote Field Eddy Current Tube Inspection

机译：在远程现场涡流管检查中使用巨型磁阻传感器
- 作者：A. Lopes Ribeiro;H. M. Geirinhas Ramos;Dario Pasadas;Tiago Rocha
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
4.Development of a Flexible and Scalable Measurement System for EM Pollution Monitoring

机译：开发灵活且可扩展的测量系统，用于EM污染监测
- 作者：Francesco Adamo;Gregorio Andria;Onofrio Losito;Luciano Mescia;Francesco Prudenzano;Valeria L. Scarano
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
5.High accuracy measurements of new conductometric metal oxide gas sensors by efficient control of working conditions

机译：通过有效控制工作条件，通过高精度测量新的电导金属氧化物气体传感器
- 作者：Francesco Bertocci;Ada Fort;Marco Mugnaini;Santina Rocchi;Luay Shahin;Valerio Vignoli
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
6.Assumptions for development of the new centering - leveling device

机译：新铭刻设备开发的假设
- 作者：Lauryna Siaudinyte;Deividas Sabaitis;Domantas Brucas
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
7.Improved FBD and RBD generation for system reliability assessment

机译：改进的FBD和RBD生成系统可靠性评估
- 作者：M. Venzi;S. Rossin;C. Michelassi;C. Accillaro;M. Catelani;L. Ciani
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
8.Detection and measurement of information system risks through adaptive management diagnostic expert systems

机译：通过自适应管理诊断专家系统检测和测量信息系统风险
- 作者：Justinas Janulevicius;Lauryna Siaudinyte;Antanas Cenys;Nikolaj Goranin
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
9.Stator Winding Fault Diagnosis in Permanent Magnet Synchronous Generators Based on Short-Circuited Turns Identification Using Extended Kalman Filter

机译：基于短路的永磁同步发电机中的定子绕组故障诊断使用扩展卡尔曼滤波器来识别识别
- 作者：B. Aubert;J. Regnier;S. Caux;D. Alejo
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
10.Acoustic analysis of electric motors in noisy industrial environment

机译：嘈杂产业环境中电动机的声学分析
- 作者：Maciej Orman;Cajetan T. Pinto
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
11.Diagnostic and Error Correction System for Avionics Devices in Presence of Single Event Upset (SEU)

机译：单次事件骤评存在的航空电子设备诊断与纠错系统（SEU）
- 作者：Marcantonio Catelani;Lorenzo Ciani
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
12.Monitoring of Power Quality in Industry

机译：在工业中监测电力质量
- 作者：Ljupco Arsov;Marija Cundeva-Blajer;Iljas Iljazi;Ivana Arsova
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
13.Study of downscaling sandstone rock porosity by x-ray microtomography

机译：X射线微观图谱抵抗砂岩岩孔隙率研究
- 作者：I. Lima;H. Alves;R. T. Lopes
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
14.Investigation of weld cracks by Microfocus tomography

机译：微孔断层扫描的焊缝裂缝调查
- 作者：I. Lima;D. de Oliveira;E. V. Moreira;L. C. Chad;M. Ponciano;R. Manao;R. T. Lopes
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
15.Assessing Metal Plate Thickness: an SVM Approach with Electromagnetic Methods

机译：评估金属板厚度：具有电磁方法的SVM方法
- 作者：Helena G. Ramos;Tiago Rocha;Jakub Kral;Dario Pasadas;Artur L. Ribeiro
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
16.A DSP-based instrument for in-service wireless transmitter power measurement

机译：基于DSP的无线发射器功率测量仪器
- 作者：Leopoldo Angrisani;Rosario Schiano Lo Moriello;Giovanni Scarpato;Michele Vadursi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
17.Thermal modeling and characterization of power converters for LHC power supplies

机译：LHC电源电源转换器的热建模与表征
- 作者：P. Cova;N. Delmonte;F. Giuliani;M. Citterio;S. Latorre;A. Lanza;M. Lazzaroni
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
18.A Solution of The Integrated μBIST for Functional and Diagnostic Testing in Mixed-Signal Electronic Embedded Systems

机译：混合信号电子嵌入式系统中功能和诊断测试的集成μBist解决方案
- 作者：Dariusz Zaleski;Romuald Zielonko
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
19.Photovoltaic Plant Efficiency Evaluation: A Proposal

机译：光伏厂效率评价：提案
- 作者：Loredana Cristaldi;Marco Faifer;Marco Rossi;Lorenzo Ciani;Massimo Lazzaroni;Sergio Toscani
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
20.Photovoltaic Power Optimizers: a comparison in reliability evaluations

机译：光伏电源优化仪：可靠性评估中的比较
- 作者：Marcantonio Catelani;Lorenzo Ciani;Giorgio Graditi;Giovanna Adinolfi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
21.On the design of truncated sequential sampling plans

机译：关于截断顺序抽样计划的设计
- 作者：Giuseppe Cavone;Nicola Giaquinto;Filomena Innone;Valeria L. Scarano
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
22.A Method for Assessing Multivariate Measurement Systems

机译：一种评估多变量测量系统的方法
- 作者：Michele Scagliarini
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
23.A Testing System for the Performance Evaluation of Fault-Tolerant Electromechanical Drives for Aircraft Applications

机译：用于飞机应用的容错机电驱动器性能评估的测试系统
- 作者：Giovanni Bucci;Fabrizio Ciancetta;Edoardo Fiorucci
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
24.Development of RT models for Model Based Control-Diagnostic and Virtual HazOp Analysis

机译：基于模型控制诊断和虚拟HATP分析的RT模型的开发
- 作者：A. Biagini;R. Conti;E. Galardi;L. Pugi;E. Quartieri;A. Rindi;S. Rossin
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
- Lube oil console;
- Virtual HazOp analysis;
- Safety critical system;
- Non destructive testing;
25.An Automatic Measurement System for the Performance Evaluation of Medium-sized and Large Photovoltaic Plants

机译：一种自动测量系统，用于中型和大型光伏植物的性能评价
- 作者：Giovanni Bucci;Fabrizio Ciancetta;Edoardo Fiorucci
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
26.Techniques for on-board vibrational passenger comfort monitoring in public transport

机译：在公共交通工具中车载振动乘客舒适监测的技术
- 作者：Ileana Bodini;Matteo Lancini;Simone Pasinetti;David Vetturi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
27.Methodology for implementing accelerated life stress on stepper motors

机译：在步进电机上实施加速生命压力的方法
- 作者：Attilio Di Nisio;Anna Maria Lucia Lanzolla;Valeria L. Scarano;Maurizio Spadavecchia;Andrea Carignano
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
28.Increasing the artificial neural network based model building speed for supporting efficient technical diagnostics

机译：增加基于人工神经网络的支持高效技术诊断模型建筑速度
- 作者：Zsolt Janos VIHAROS;Krisztian Balazs KIS
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
29.Device for Precise Packet Delay Measurement

机译：用于精确分组延迟测量的设备
- 作者：Jan Breuer;Vojtech Vigner;Jaroslav Roztocil
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
30.Data set processing for the optimization of the artificial intelligence-based diagnostic methods

机译：基于人工智能的诊断方法优化的数据集处理
- 作者：Piotr Bilski
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
31.Fault detection in complex analog circuits using Support Vector Machines

机译：使用支持向量机的复杂模拟电路故障检测
- 作者：Adrian Bilski;Jacek Wojciechowski
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
- Complex analog systems;
- Support Vector Machine;
- parametric fault detection;
32.Uncertainty Analysis in Prognostics for Optimal Maintenance

机译：最佳维护预测中的不确定性分析
- 作者：Simone Turrin;Subanatarajan Subbiah
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
33.Designing of fault management system for Wireless Active Guardrail System

机译：无线主动护栏系统故障管理系统的设计
- 作者：Luca De Vito;Francesco Paolo Di Candia;Francesco Picariello;Maria Riccio;Ioan Tudosa
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
34.Optimization of Frictional Heating Parameters of Artificial Joint Materials by Taguchi Approach

机译：TAGUCHI方法优化人工关节材料的摩擦加热参数
- 作者：Binnur SAGBAS;M. Numan DURAKBASA
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
35.A Novel Statistical Approach for Testing Automotive Control Software

机译：一种用于测试汽车控制软件的新型统计方法
- 作者：I. Arsie;G. Betta;D. Capriglione;A. Pietrosanto;P. Sommella
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
36.Design of an Automatic Train Operation (ATO) system based on CBTC for the management of driverless suburban railways

机译：基于CBTC的自动列车运行（ATO）系统设计，用于管理郊区铁路管理
- 作者：Benedetto Allotta;Luigi Chisci;Pierluca DAdamio;Susanna Papini;Luca Pugi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
- CBTC system;
- safety subsystem;
- moving-block signaling;
37.System engineering improvement through advanced reliability assessment

机译：通过高级可靠性评估系统工程改进
- 作者：C. Accillaro;S. Rossin;M. Venzi;E. Quartieri
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
38.Fault Detection for a Temperature Control System using PID Controller Based on Artificial Immune Systems

机译：基于人工免疫系统的PID控制器的温度控制系统故障检测
- 作者：Robson Pacifico Guimaraes Lima;Bruno Willian de Souza Arruda;Cleonilson Protasio de Souza
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
39.Evaluation of timing GPS receivers for industrial applications

机译：对工业应用时序GPS接收器的评价
- 作者：Vojtech Vigner;Jaroslav Roztocil;Blanka Cemusova
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
40.Experimental setup for non-destructive measurement of tunneling currents in semiconductor devices

机译：半导体器件中隧道电流的非破坏性测量的实验设置
- 作者：P. Chiquet;P. Masson;J. Postel-Pellerin;R. Laffont;G. Micolau;F. Lalande;A. Regnier
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
41.Determination of Cutting Tool Geometries with High Precise Measurement Techniques and Investigation of Their Effects on Workpiece Surface Properties

机译：具有高精度测量技术的切削工具几何形状及其对工件表面性能影响的研究
- 作者：M. Numan Durakbasa;Anil Akdogan;A. Serdar Vanli;Asli Gunay
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
42.Evaluation of Power Consumption of Workstation Computers using Benchmarking

机译：使用基准测试评估工作站计算机的功耗
- 作者：Francesco Picariello;Sergio Rapuano;Umberto Villano
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
43.Automating end-of-line quality control tests of small brushed DC motors

机译：自动化小型拉丝直流电动机的线路质量控制试验
- 作者：Francisco Rodriguez Verdugo;Enrico Concettoni;Alessandro Bastari;Cristina Cristalli;Maurizio de Palma
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
44.Influences of Geometric Configuration on the Analysis of Uncertainties Affecting a Novel Configuration of Self-Tracking LDV

机译：几何配置对影响自动跟踪LDV新配置的不确定性分析的影响
- 作者：Giuseppe Dinardo;Laura Fabbiano;Gaetano Vacca
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
45.SMART bearings: From sensing to actuation

机译：智能轴承：从感知到致动
- 作者：Diego Galar;Uday Kumar
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
46.Development of a Flexible and Scalable Measurement System for EM Pollution Monitoring

机译：开发用于EM污染监测的灵活和可扩展的测量系统
- 作者：Francesco Adamo;Gregorio Andria;Onofrio Losito;Luciano Mescia;Francesco Prudenzano;Valeria L. Scarano
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
47.Development of coating thickness gauge for magnetic coatings

机译：磁涂料涂层厚度计的开发
- 作者：Jae-Hwa Hong;Jung Hun Park
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
48.Using Giant Magneto-Resistance Sensors in Remote Field Eddy Current Tube Inspection

机译：在远程场涡流管检测中使用巨型磁阻传感器
- 作者：A. Lopes Ribeiro;H. M. Geirinhas Ramos;Dario Pasadas;Tiago Rocha
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
49.Stator Winding Fault Diagnosis in Permanent Magnet Synchronous Generators Based on Short-Circuited Turns Identification Using Extended Kalman Filter

机译：基于短路的永磁同步发电机中的定子绕组故障诊断使用扩展卡尔曼滤波器来识别
- 作者：B. Aubert;J. Regnier;S. Caux;D. Alejo
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
50.High accuracy measurements of new conductometric metal oxide gas sensors by efficient control of working conditions

机译：通过有效控制工作条件，高精度测量新的电导金属氧化物气体传感器
- 作者：Francesco Bertocci;Ada Fort;Marco Mugnaini;Santina Rocchi;Luay Shahin;Valerio Vignoli
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
51.Study of downscaling sandstone rock porosity by x-ray microtomography

机译：X射线显微镜监测探测砂岩岩孔隙率研究
- 作者：I. Lima;H. Alves;R. T. Lopes
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
52.Acoustic analysis of electric motors in noisy industrial environment

机译：嘈杂产业环境中电动机的声学分析
- 作者：Maciej Orman;Cajetan T. Pinto
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
53.Detection and measurement of information system risks through adaptive management diagnostic expert systems

机译：通过自适应管理诊断专家系统检测和测量信息系统风险
- 作者：Justinas Janulevicius;Lauryna Siaudinyte;Antanas Cenys;Nikolaj Goranin
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
54.Diagnostic and Error Correction System for Avionics Devices in Presence of Single Event Upset (SEU)

机译：单一事件骤评存在的航空电子设备的诊断与纠错系统（SEU）
- 作者：Marcantonio Catelani;Lorenzo Ciani
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
55.Monitoring of Power Quality in Industry

机译：监测工业的电能质量
- 作者：Ljupco Arsov;Marija Cundeva-Blajer;Iljas Iljazi;Ivana Arsova
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
56.Increasing the artificial neural network based model building speed for supporting efficient technical diagnostics

机译：增加基于人工神经网络的基于神经网络的支持高效技术诊断的模型建筑速度
- 作者：Zsolt Janos VIHAROS;Krisztian Balazs KIS
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
57.Data set processing for the optimization of the artificial intelligence-based diagnostic methods

机译：基于人工智能的诊断方法优化的数据集处理
- 作者：Piotr Bilski
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
58.Designing of fault management system for Wireless Active Guardrail System

机译：无线主动护栏系统故障管理系统的设计
- 作者：Luca De Vito;Francesco Paolo Di Candia;Francesco Picariello;Maria Riccio;Ioan Tudosa
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
59.Thermal modeling and characterization of power converters for LHC power supplies

机译：LHC电源电源转换器的热建模与表征
- 作者：P. Cova;N. Delmonte;F. Giuliani;M. Citterio;S. Latorre;A. Lanza;M. Lazzaroni
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
60.A DSP-based instrument for in-service wireless transmitter power measurement

机译：基于DSP的无线发射机功率测量的仪器
- 作者：Leopoldo Angrisani;Rosario Schiano Lo Moriello;Giovanni Scarpato;Michele Vadursi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
61.Design of an Automatic Train Operation (ATO) system based on CBTC for the management of driverless suburban railways

机译：基于CBTC的自动列车运行（ATO）系统的设计，用于管理郊区铁路管理
- 作者：Benedetto Allotta;Luigi Chisci;Pierluca DAdamio;Susanna Papini;Luca Pugi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
- CBTC system;
- safety subsystem;
- moving-block signaling;
62.An Automatic Measurement System for the Performance Evaluation of Medium-sized and Large Photovoltaic Plants

机译：一种用于中型和大型光伏植物性能评价的自动测量系统
- 作者：Giovanni Bucci;Fabrizio Ciancetta;Edoardo Fiorucci
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
63.Techniques for on-board vibrational passenger comfort monitoring in public transport

机译：公共交通工具振动乘客舒适监测技术
- 作者：Ileana Bodini;Matteo Lancini;Simone Pasinetti;David Vetturi
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
64.Fault detection in complex analog circuits using Support Vector Machines

机译：使用支持向量机的复杂模拟电路故障检测
- 作者：Adrian Bilski;Jacek Wojciechowski
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
- Complex analog systems;
- Support Vector Machine;
- parametric fault detection;
65.System engineering improvement through advanced reliability assessment

机译：通过先进的可靠性评估系统工程改进
- 作者：C. Accillaro;S. Rossin;M. Venzi;E. Quartieri
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
66.A Testing System for the Performance Evaluation of Fault-Tolerant Electromechanical Drives for Aircraft Applications

机译：用于飞机应用的容错机电驱动器性能评估的测试系统
- 作者：Giovanni Bucci;Fabrizio Ciancetta;Edoardo Fiorucci
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
67.Device for Precise Packet Delay Measurement

机译：用于精确分组延迟测量的设备
- 作者：Jan Breuer;Vojtech Vigner;Jaroslav Roztocil
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
68.Optimization of Frictional Heating Parameters of Artificial Joint Materials by Taguchi Approach

机译：Taguchi方法优化人工关节材料的摩擦加热参数
- 作者：Binnur SAGBAS;M. Numan DURAKBASA
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
69.A Novel Statistical Approach for Testing Automotive Control Software

机译：一种用于测试汽车控制软件的新型统计方法
- 作者：I. Arsie;G. Betta;D. Capriglione;A. Pietrosanto;P. Sommella
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
70.Uncertainty Analysis in Prognostics for Optimal Maintenance

机译：最佳维护预测中的不确定性分析
- 作者：Simone Turrin;Subanatarajan Subbiah
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
71.Methodology for implementing accelerated life stress on stepper motors

机译：在步进电机上实施加速寿命压力的方法
- 作者：Attilio Di Nisio;Anna Maria Lucia Lanzolla;Valeria L. Scarano;Maurizio Spadavecchia;Andrea Carignano
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
72.Development of RT models for Model Based Control-Diagnostic and Virtual HazOp Analysis

机译：基于模型控制诊断和虚拟HATP分析的RT模型的开发
- 作者：A. Biagini;R. Conti;E. Galardi;L. Pugi;E. Quartieri;A. Rindi;S. Rossin
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
- Lube oil console;
- Virtual HazOp analysis;
- Safety critical system;
- Non destructive testing;
73.Influences of Geometric Configuration on the Analysis of Uncertainties Affecting a Novel Configuration of Self-Tracking LDV

机译：几何配置对影响自动跟踪LDV新配置的不确定性分析的影响
- 作者：Giuseppe Dinardo;Laura Fabbiano;Gaetano Vacca
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年
74.SMART bearings: From sensing to actuation

机译：智能轴承：从传感到致动
- 作者：Diego Galar;Uday Kumar
- 会议名称：《IMEKO TC10 Workshop on New Perspectives in Measurements, Tools and Techniques for Industrial Applications》 | 2013年