首页>外文会议>其他>IMEKO TC3 International Conference on Measurement of Force, Mass and Torque

IMEKO TC3 International Conference on Measurement of Force, Mass and Torque

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Comparison between the CENAM (Mexico) 150 kN and the INRiM (Italy) 1 MN force standard machines

机译：Cenam（墨西哥）150 kN与Inrim（意大利）1 MN强制标准机的比较
- 作者：C. Marinari;J. C. Torres-Guzman;A. Germak;D. A. Ramirez-Ahedo
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- force;
- measurement;
- force standard machine;
- comparison;
2.Realization of forces (2N-20N) by primary method

机译：通过初次方法实现力（2N-20N）
- 作者：Kamlesh K. Jain;S.S.K. Titus;H.N.P. Poddar;S.K. Dhulkhed
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force Realization;
- Dead Weight Force Machine;
- Force Metrology;
3.Measurement of gravitational acceleration values at the calibration laboratories in Korea

机译：韩国校准实验室的重力加速度值测量
- 作者：S. Y. Woo;I. M. Choi;H. W. Song
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Gravity;
- acceleration;
- gravimeter;
- calibration;
4.Investigations of load cells made of single-crystalline silicon with sputrered-on strain gauges

机译：用伏特型应变仪对由单晶硅制成的负载电池的研究
- 作者：S. Mauselein;O. Mack;R. Schwartz;G. Jager
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- silicon;
- load cells;
- force sensors;
- mechanical after effects;
5.Metrology in Developing Economies - Jamaican Experience in Publishing Mass CMCs in Appendix C of MRA of CIPM.

机译：发展中经济体的计量 - 牙买加在CIPM的MRA附录C中发布质量CMC的经验。
- 作者：M. Sanz;L. O. Becerra
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Mass Metrology;
- CMCs recognition;
6.Metrology impact in Technological Universities, Mexico

机译：技术大学的计量影响，墨西哥
- 作者：S. Martinez-Sanchez;F. M. C. Laguna-Aguilar;J. C. Torres-Guzman
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Metrology;
- technological universities;
7.Design of an automatic apparatus for the calibration of on-line densimeters

机译：用于校准在线密度计的自动装置的设计
- 作者：S. Lorefice;A. Malengo;M. Caravaggio;L. Cianciotta
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Calibration;
- Density;
- Densimeter;
8.Magnetic Levitation System for the Dissemination of a Non-Artifact Based Kilogram

机译：磁悬浮系统，用于传播非工件基千克
- 作者：Zeina Jabbour;Patrick Abbott;Edwin Williams;Ruimin Liu;Vincent Lee
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Mass;
- magnetic levitation;
- kilogram;
- dissemination;
9.Static and dynamic evaluation of the CENAM (Mexico) 150 kN primary force standard machine by means of the INRiM (Italy) 100 kN six-component dynamometer

机译：CENAM（墨西哥）150 ks主力标准机的静态和动态评估通过INRIM（意大利）100 kN六组件测功机
- 作者：C. Marinari;F. Mazzoleni;J. C. Torres-Guzman;D. A. Ramirez-Ahedo
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force;
- force standard machine;
- multi-component dynamometer;
- intercomparison;
10.Development of the new LNE 50 N-m deadweight torque standard machine

机译：开发新LNE 50 N-M耐扭扭矩标准机
- 作者：P. Averlant;A. Gosset
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Torque standard machine;
11.The relevance of using a monte carlo method to evaluate UNCERTAINTY in mass calibration

机译：使用蒙特卡罗方法评价质量校准中不确定性的相关性
- 作者：J. A. Sousa;A. S. Ribeiro;A. B. Forbes;P. M. Harris;F. Carvalho;L. Bacelar
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- modelling;
- uncertainty;
- Monte Carlo;
- mass calibration;
12.Strain gauged elastic elements for force and related quantities measurement

机译：用于力和相关数量测量的应变测量的弹性元件
- 作者：Dan Mihai Stefanescu
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force;
- related quantities;
- elastic elements;
- strain gauges;
- SI units;
13.Force standards comparison at 1 kN and 50 kN among national laboratories from EUROMET and SIM

机译：强制标准比较在欧洲大学和SIM的国家实验室中的1 kn和50 kn
- 作者：C. Villarroel-Poblete;J. C. Torres-Guzman;P. Averlant;A. Knott;R. Kumme;J. A. Robles-Carbonell;D. Ramirez-Ahedo;L. R. Giobergia
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force;
- international comparison;
- SIM;
- Euromet;
14.Determination of mass differences in the range of units of (mu)g by radioactivity measurement

机译：通过放射性测量测定（MU）G的单位范围内的质量差异
- 作者：Richard Tykva
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- mass differences;
- units of (mu)g;
- radioactivity measurement;
15.Solids volume by hydrostatic weighing comparison between CENAM-Mexico and INMETRO-Brazil. SIM.7.34-B

机译：CENAM-MEXICO和南巴西内静电称量比较的固体体积。 SIM.7.34-B.
- 作者：Luis O. Becerra;Dalni Malta;Luz. Ma. Centeno;Jose Julio Pinheiro
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Volume of solids;
- Solid density;
- hydrostatic weighing measurements;
16.Traceability concept teaching by means of experimental procedures for chemistry undergraduate students at UNAM.

机译：植物植物中的化学本科生实验程序可追溯性概念教学。
- 作者：Tejeda R.;Rivera F.;Santamaria I.;Reyes S.;Ortega P.
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
17.Evaluation of standard uncertainty of measured mass difference on 10 kg comparator balance

机译：评估10 kg比较器平衡测量质量差异的标准不确定性
- 作者：Gasper Vindisar;Matej Grum;Martin Terlep
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- calibration;
- comparator balance;
- weights;
- support plates;
- standard deviation;
18.The repeatability optimization of an automated weighing comparator

机译：自动称重比较器的可重复优化
- 作者：S. Lee;J. W. Chung;W. G. Lee;K. P. Kim
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- automated balance;
- weight;
- mass standard;
- stabilization time;
- optimization;
19.The achievable uncertainty for balance-based force standard machines in the range from micronewton to newton

机译：基于平衡的力标准机的可实现的不确定性范围从Micronewton到牛顿的范围
- 作者：Jens Illemann
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force standard machine;
- traceability;
- small forces;
- force transducer;
- ISO 376;
- electromagnetically compensated balance;
20.Performance of force comparator with reference to tuning-fork type force transducer

机译：力量比较器的性能参考Tuning-Fork型力换能器
- 作者：Toshiyuki Hayashi;Yoshihisa Katase;Kazunaga Ueda;Tsuyoshi Hoshino;Hiroshi Suzawa;Masaaki Kobayashi
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Tuning fork;
- comparator;
- testing machine;
- small force;
- eccentric force;
21.Comparison of Shock and Sine Force Calibration Methods

机译：震动和正弦校准方法的比较
- 作者：M. Kobusch;A. Link;A. Buss;T. Bruns
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force transducer;
- sine excitation;
- shock excitation;
- modelling;
- parameter identification;
22.Qualification of force standard machines

机译：力标准机的资格
- 作者：Jorge M.E. Saffar;Claudio A. Koch;Eunice M. Ferreira Marques;Renata W. Rocha;Rafael S. Oliveira;Ademir R. Chagas;Rodrigo F. Guilherme
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- force;
- standard;
- inter-comparison;
- dead-weight machine;
23.Mass dissemination using a fully automated mass comparator robot system

机译：使用全自动质量比较机器人系统进行大规模传播
- 作者：T. Frohlich;T. Fehling;B. Gatzemeier;S. Osang;D. Heydenbluth
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
24.Suggestions on how to include the effect of reproducibility in the evaluation of simplified calibration procedures

机译：关于如何在简化校准程序评估中包含可重复性效果的建议
- 作者：G. Wegener;H. W. Werner
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Torque calibration;
- simplified calibration;
- reproducibility;
- statistical estimate;
- type testing;
- VDI 2646;
25.Advantage of carrier frecquency in contactles high precision torque measurement systems

机译：载波频率在非接触式高精度扭矩测量系统中的优点
- 作者：S. Kuhn
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- torque transducer;
- carrier frequency;
- contactless measurement;
26.Automatic testing facility for determining liquids and solids density; and determining the volume of E1 weights

机译：用于确定液体和固体密度的自动测试设施;并确定E1重量的体积
- 作者：Christian Buchner
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
27.Linking SIM Mass Comparisons to the KCRV on 1 kg

机译：将SIM卡质量与KCRV联系起来1公斤
- 作者：Luis O. Becerra
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Mass;
- Mass comparisons;
28.A new image processing system for hydrometer calibration developed at CENAM

机译：CENAM开发的液压仪校准的新型图像处理系统
- 作者：Luis M. Pena;J. Carlos Pedraza;Luis O. Becerra;Carlos A. Galvan
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Hydrometer;
- image processing;
- Cuckow's Method;
29.Analysis of Change of Mass Difference between Weight Support Plates during Subdivision of 1 kg

机译：1千克细分期间重量支撑板之间质量差异变化分析
- 作者：Matej Grum;Martin Terlep
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- calibration;
- comparator balance;
- weights;
- support plates;
- quality assurance;
30.Characterization of quantum-weight generating cantilever device

机译：量子重量产生悬臂装置的表征
- 作者：Jae-Hyuk Choi;Kwang-Cheol Lee;Yun-Won Kim;Min-Seok Kim
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Quantum-weight;
- ultrasoft cantilever;
- niobium film;
31.Amorphous wire based stress sensor working with low carrier frequency

机译：基于非晶线的应力传感器，使用低载波频率
- 作者：Marinel Temneanu;Romeo Ciobanu;Codrin Donciu
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- internal ac impedance;
- stress-impedance effect;
- amorphous materials;
- impedance spectroscopy;
32.A new six-component force vector sensor - first investigations

机译：一个新的六分力矢量传感器 - 首先调查
- 作者：S. Lietz;F. Tegtmeier;R. Kumme;D. Roske;U. Kolwinski;K. Zoller
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- force standard;
- calibration;
- traceability;
33.The torque metrology management in Brazil

机译：巴西的扭矩计量管理
- 作者：L. C. Cabral-de Freitas;S. R. Reis-da Costa;R. Soares-de Oliveira;C. A. Koch
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Torque traceability;
- torque dissemination;
- primary standard;
34.Progress on the BIPM Watt Balance

机译：BIPM瓦特平衡的进展
- 作者：A. Picard;H. Fang;M. Stock
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Planck constant;
- kilogram;
- watt balance;
35.The SIT activity to disseminate physical quantities in Italy: calibration of material testing machine intercomparisons

机译：坐在静态活动，以传播意大利物理量：材料检测机的校准
- 作者：Carlo Ferrero;Luciano Bianchi
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- calibration;
- testing machine;
- intercomparison;
36.A new type of force sensor

机译：一种新型的力传感器
- 作者：A. Stoian;T. Kuberczyk;G. Schultes
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- force sensor;
- load cell;
- finite element analysis;
- thin film strain gauges;
- electron beam welding;
37.Determination of Air Density with Buoyancy Artefacts

机译：用浮力伪成物测定空气密度
- 作者：Sari Semenoja;Kari Riski;Leena Stenlund
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- air density;
- buoyancy artefacts;
- vacuum weighing;
38.Activities designed to establish relationships between concepts as a didactic strategy in the metrology teaching process

机译：旨在建立概念之间的关系作为计量教学过程中的概念之间的关系
- 作者：Praxedis I. Santamaria M.;Roman Tejeda C.
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Metrology teaching;
- Calibration;
- Traoeability;
- Uncertainty;
39.Continuous calibration of force transducers

机译：持续校准力传感器
- 作者：Laurence Brice;Andy Knott;Alan Wilson
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- dynamic;
- continuous;
- calibration;
- force;
- transducer;
- creep;
40.Enlargement of the force capability at CEM: development of a 10 MN hydraulic force standard machine

机译：扩大CEM的力能力：开发10 MN液压标准机
- 作者：J.A. Robles Carbonell;J.A. Fernandez Garcia;Jorge L. Robles Verdecia
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force standard machine;
- hydraulic force standard machine;
- build-up force measuring system;
- traceability;
41.A comparison of primary platinum-iridium kilogram mass standards among eighteen European NMIs

机译：18个欧洲NMI中原发性铂 - 铱千克批量标准的比较
- 作者：S. Davidson
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Mass gain;
- kilogram;
- SI units;
- national standards;
42.The use of strain gauges in the Kenyan industry for measurement

机译：在肯尼亚工业中使用应变仪进行测量
- 作者：David Kimetto
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Strain Measurement;
- Strain Analysis and Wheatstone bridge;
43.Add-on of the 2-MN force standard machine for testing load cells

机译：用于测试负载单元的2-MN强制标准机的附加组件
- 作者：Oliver Mack
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Temperature Chamber;
- Load Cell;
- OIML R60;
44.Hybrid torque standard machine for 1 kN(centre dot)m developed in CENAM

机译：用于1 kN（中心点）M的混合扭矩标准机在CENAM开发
- 作者：D. Ramirez-Ahedo;J. C. Torres-Guzman;F. Martinez-Juarez
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Torque;
- hybrid torque standard;
- torque primary standard;
- torque transfer standard;
- torque calibration systems;
45.Strain sensors based on bragg gratings

机译：基于布拉格光栅的应变传感器
- 作者：K. Haase
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Optical strain gage;
- composite material;
- structural durability;
- high strain;
46.Automated volume measurement for weihts using acoustic volumeter

机译：使用声学容积的WeiHTS自动体积测量
- 作者：M. Ueki;T. Kobata;K. Ueda;A. Ooiwa
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- acoustic volumeter;
- weight;
- volume;
- automated measurement;
47.Dissemination of the force unit in Italy: intercomparison results up to 20 kN

机译：传播意大利的力量单位：相互熟练的结果高达20 kN
- 作者：C. Ferrero
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- load cell;
- transfer standard;
- intercomparison;
48.Expansion of the calibration range and improvement of the uncertainty in the 1 kN(centre dot)m deadweight torque standard machine

机译：扩展校准范围和提高1N KN（中心点）M重量级扭矩标准机器的不确定性
- 作者：K. Ohgushi;A. Nishino;T. OTA;K. Ueda
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Torque;
- Sensitivity limit;
- Deadweight;
49.Mathematical representation of reference torque transducers in partial-range regimes

机译：部分范围制度参考扭矩换能器的数学表示
- 作者：A. Bruge
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- torque;
- calibration;
- reference transducer;
- partial range;
- hysteresis;
- comparison method;
- scaling transformation;
50.Implementation of the reference force standard in the Croatian metrology and Interlaboratory comparison

机译：克罗地亚计量与互借比较的参考力标准的实施
- 作者：Mladen Franz;Zeljko Alar;Tamara Aleksandrov
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- force;
- reference force machine;
- calibration;
- interlaboratory comparison;
51.Development of mass and length measurement system on conveyor belt (2nd report)

机译：传送带质量和长度测量系统的开发（第二次报告）
- 作者：Takanori Yamazaki;Akihiro Watanabe;Hideo Ohnishi;Masaaki Kobayashi;Shigeru Kurosu
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Length measurement;
- Digital image;
- Moving product;
- Conveyor belt;
52.Mass determination of 1 kg silicon spheres for Avogadro project

机译：Avogadro项目1 kg硅球的质量测定
- 作者：H. Fang;A. Picard
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Mass comparison;
- Avogadro;
- balance;
- water vapour sorption;
53.Design and Performance of the new Sartorius Robot-System

机译：新Sartorius机器人系统的设计和性能
- 作者：T. Fehling;T. Frohlich;D. Heydenbluth
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Robot-System;
- E1-MassScale;
- Mass Comparator;
54.Fully automatic mass laboratory from 1 mg up to 50 kg - Robots perform high precision mass determination

机译：完全自动质量实验室从1毫克高达50公斤 - 机器人执行高精度质量测定
- 作者：Christian Buchner
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- mass laboratory;
- automatic system;
55.Load cells temperature effect in force applications for automotive industry requirements

机译：负载电池温度效应力应用用于汽车行业的要求
- 作者：Gonzalez Espinosa David;Perez Ramirez Edgar
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
56.Instrumentation improvements in the MMS-150 kN force standard machine, CENAM Mexico

机译：MMS-150 KN力标准机器，CENAM墨西哥的仪表改进
- 作者：C. Morales-Aguillon;J. C. Torres-Guzman;D. A. Ramirez-Ahedo
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- control;
- force standard;
- calibration;
- traceability;
57.A new weigh-in-motion and traffic monitoring system

机译：一种新的体重和交通监控系统
- 作者：P. Barsanescu;P. Carlescu;D. Mihai Stefanescu
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- weigh-in-motion system;
- elastic element;
- strain gauges;
- design;
- FEA;
58.Statistical Analysis of 2 MN and 4 MN Force Range Key Comparisons

机译：统计分析2 MN和4 MN力范围键比较
- 作者：T. Bartel
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Degrees of equivalence;
- Force;
- Force standard;
- Key comparison;
- Metrology;
- Reference value;
- Transfer standard;
- Uncertainty;
59.Temperature control in the (mu)K range for density measurements

机译：（mu）k范围内的温度控制为密度测量
- 作者：Horst Bettin
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Density measurements;
- temperature controlling;
- temperature regulation;
- electronic temperature fixed point;
60.The New version of the German torque calibration standard DIN 51309:2005-12 a comparative overview

机译：新版本的德国扭矩校准标准DIN 51309：2005-12相对概述
- 作者：D. Roske
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- torque;
- calibration standard;
- DIN51309;
- hysteresis;
- torque reference machine;
61.Torque proficiency test among accredited laboratories in Mexico

机译：墨西哥认可的实验室中的扭矩水平测试
- 作者：J. Galvan-Mancilla;J. C. Torres-Guzman;D. Ramirez-Ahedo
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Torque;
- proficiency test;
- accredited laboratories;
62.The long-term behaviour of force transducers as a criteria for the selection of new transfer standards

机译：力传感器的长期行为作为选择新转移标准的标准
- 作者：Aimo Pusa
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Force transducer;
- long term stability;
- force intercomparison;
63.Establishment of torque standards in KRISS of Korea

机译：韩国克里斯扭矩标准的建立
- 作者：P. Yon-Kyu;K. Min-Seok;K. Jong-Ho;C. Jae-Hyuk;K. Dae-lm
- 会议名称：《IMEKO TC3 International Conference on Measurement of Force, Mass and Torque》 | 2009年
- Torque;
- Torque standard machine;
- Uncertainty;
- Intercomparison;