首页>外文会议>其他>International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)

International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Use of Shell Elements for the FEM-Simulation of the Welding Process of Sheet Metal Parts

机译：壳单元在钣金零件焊接过程的有限元模拟中的应用
- 作者：M. F. Zaeh;L. Papadakis;S. Roeren;T. Hornfeck
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- finite element method (FEM);
- welding;
- thermal effects;
2.Thermal Imaging Analysis of Stimulated Heat Diffusion in Sheet Metal for Non-Destructive Metrology and Testing

机译：用于无损计量和测试的金属薄板中受热扩散的热成像分析
- 作者：B. Spellenberg;J. Zettner;T. Hierl;M. Haller;T. Lenzi
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- non-destructive testing;
- thermal imaging;
- heat diffusion;
3.Thermal Characterization of Friction Stir Welded Butt Joints

机译：搅拌摩擦对接接头的热特性
- 作者：S. Beccari;L. DAcquisto;L. Fratini;C. Salamone
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- welding;
- friction, thermography;
4.Tribology in Sheet Metal Forming with Regard to Challenges in Lightweight Construction

机译：钣金成型中的摩擦学，以应对轻量化施工中的挑战
- 作者：P. Groche;T. Callies
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- production process;
- sheet metal forming;
- tribology;
5.The Integration of CAPP and Production Planning for Bent Sheet Metal Parts

机译：CAPP与弯曲钣金件生产计划的集成
- 作者：D. Cattrysse;P. Collin;J. R. Duflou;T. H. M. Nguyen;D. Van Oudheusden
- 会议名称：《》 | 2005年
- computer automated process planning (CAPP);
- computer aided planning (CAP);
- bending;
6.The Effect of Pre-Straining on the Mechanical Behaviour of Self-Piercing Riveted Aluminium Alloy Sheets

机译：预应变对自穿孔铆接铝合金薄板力学性能的影响
- 作者：L. Han;K. W. Young;R. Hewitt;A. Chrysanthou;J. M. OSullivan
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- aluminium;
- sheet;
- self-piercing riveting;
7.The Development of Cold Forging Progressive Die Technology for the Case of Slim Type Spindle Motor

机译：细长型主轴电机壳体冷锻级进模技术的发展
- 作者：C.-W. Tai;H.-C. Tsai;S.-C. Tsai
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- forming;
- simulation;
- slim type spindle motor;
8.Asymmetric Incremental Sheet Forming

机译：不对称增量片材成型
- 作者：J. Jeswiet
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- cold forming;
- rapid prototyping;
- sheet metal;
9.Analysis of the Forming Limit Diagram in Digital Environment

机译：数字环境下的成形极限图分析
- 作者：T. Pepelnjak;A. Petek;K. Kuzman
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- finite element method (FEM);
- sheet metal;
- forming limit diagram;
10.Active Material Flow Control During High-Pressure Sheet Metal Forming

机译：高压钣金成型过程中的活性材料流量控制
- 作者：P. Groche;C. Metz
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- production process;
- sheet metal forming;
- material flow control;
11.Advanced Cutting Technology in Process Chains for High Strength Steels

机译：高强度钢工艺链中的先进切割技术
- 作者：R. Neugebauer;V. Kraeusel;H. Braeunlich
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- cutting;
- high-strength steel;
- tool design;
12.3D Ultrasonic Imaging for Sheet Metal Hydroforming

机译：钣金液压成型的3D超声成像
- 作者：Lehrstuhl fuer Produktionssysteme (LPS);Universitaetsstr. 150;D-44780 Bochum;Germany
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- ultrasonic;
- sheet metal;
- imaging;
13.A Global Approach of the Finite Element Simulation of Hot Stamping

机译：热冲压有限元模拟的整体方法
- 作者：P. Hein
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- simulation;
- high strength steel;
- hot stamping;
14.Studies for the Development of a Simulation Basis for Numerically Controlled Driving of Sheet Metal

机译：钣金件数控驱动仿真基础的发展研究
- 作者：H. Hoffmann;R. Hautmann;R. Petry
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- forming;
- simulation;
- sheet metal;
15.Sheet Thinning Prediction in Single Point Incremental Forming

机译：单点增量成形中的薄板预测
- 作者：G. Ambrogio;L. Filice;F. Gagliardi;F. Micari
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal process;
- FEM analysis;
- incremental forming;
16.Process Characteristics of Laser Brazing Aluminium Alloys

机译：激光钎焊铝合金的工艺特性
- 作者：F. Klocke;A. Castell-Codesal;D. Donst
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser beam machining (LBM);
- welding;
- laser brazing;
17.Optical Measuring Technologies in Sheet Metal Processing

机译：钣金加工中的光学测量技术
- 作者：K. Galanulis
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- measuring instrument;
- sheet metal;
- 3D digitizing;
18.Non-Thermal Laser Stretch-Forming

机译：非热激光拉伸成型
- 作者：H. Schulze Niehoff;F. Vollertsen
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser;
- sheet metal;
- stretch-forming;
19.Mechanised Plasma-Powder-Arc-Welding (PPAW) of Aluminium Sheets

机译：铝板的机械化等离子粉末弧焊（PPAW）
- 作者：J. Wilden;J. P. Bergmann
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- aluminium;
- plasma;
- powder;
20.Measuring and Quantifying the Surface-Roughness Anisotropy of Modeled and Industrially Produced Surfaces

机译：测量和量化建模和工业生产表面的表面粗糙度各向异性
- 作者：C. M. Wichern;W. Rasp
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- surface;
- roughness;
- anisotropy;
21.Manufacturing of High Strength Steel and Aluminum for a Mixed Material Body in White

机译：白色混合材料车身用高强度钢和铝的制造
- 作者：M. Pfestorf
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- high strength steel;
- multi phase steel;
- aluminum;
22.Investigations on Seam Quality in Laser Beam Welding of Contaminated, Zinc Coated Sheets

机译：污染的镀锌板激光束焊接中焊缝质量的研究
- 作者：A. Blankl;M. Geiger
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- welding;
- Nd:YAG laser;
- lubrication;
23.Magnesium Sheet Metal Forming Considering its Specific Yield Behavior

机译：考虑其特定屈服行为的镁薄板成形
- 作者：M. Redecker;K. Roll;S. Haeussinger
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal forming;
- magnesium;
- hot forming;
24.Influence of an Incremental Deformation on Material Behaviour and Forming Limit of Aluminium Al99,5 and QT-Steel 42CrMo4

机译：增量形变对Al99,5和QT-42CrMo4铝的材料性能和成形极限的影响
- 作者：L. W. Meyer;C. Gahlert;F. Hahn
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- metal;
- forming;
- incremental;
25.Incremental Sheet Forming with an Industrial Robot - Forming Limits and Their Effect on Component Design

机译：工业机器人的增量板材成形-成形极限及其对零件设计的影响
- 作者：L. Lamminen
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal;
- robot;
- incremental forming;
26.Integrated Manufacturing by Hydroforming, Laser Welding and Cutting

机译：液压成型，激光焊接和切割的集成制造
- 作者：O. Kreis;M. Celeghini;M. Merklein
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- process;
- laser;
- hydroforming;
27.Intelligent Manufacturing by Enhanced Product Models

机译：通过增强的产品模型进行智能制造
- 作者：H. Bley;C. Zenner;M. Bossmann
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- computer aided manufacturing;
- quality;
- feature;
28.Hydromechanical Deep Drawing Simulations: Model Development and Process Parameters Investigation

机译：液压机械深拉模拟：模型开发和过程参数研究
- 作者：E. Ceretti;C. Giardini;C. Contri;P. Bortot
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal;
- finite element method (FEM);
- hydromechanical deep drawing (HDD);
29.Further Experimental Investigations and FEM Model Development in Sheet Incremental Forming

机译：板材增量成形中的进一步实验研究和有限元模型开发
- 作者：C. Giardini;E. Ceretti;A. Attanasio
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal;
- finite element method (FEM);
- sheet incremental forming (SIF);
30.System for Design and Computation of Lightweight Structures Made of Bent Profiles

机译：由弯曲型材制成的轻型结构的设计和计算系统
- 作者：S. Chatti;U. Dirksen;M. Schikorra;M. Kleiner
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- design;
- profile;
- bending;
31.Springback Analysis of Sheet Metals Regarding Material Hardening

机译：关于材料硬化的钣金回弹分析
- 作者：M. Schikorra;R. Govindarajan;A. Brosius;M. Kleiner
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- springback;
- finite element method (FEM);
- material;
32.Solution Heat Treatment and Cold Die Quenching in Forming AA 6xxx Sheet Components: Feasibility Study

机译：形成AA 6xxx板材组件的固溶热处理和冷模淬火：可行性研究
- 作者：R. P. Garrett;J. Lin;T. A. Dean
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- aluminium;
- heat treatment;
- quench-forming;
33.Friction Stir Welding of Light Weight Sandwich Materials

机译：轻质夹芯材料的搅拌摩擦焊
- 作者：S. Doerfler;A. Otto
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- welding;
- friction;
- aluminum foam sandwich;
34.Force Measurements for Single Point Incremental Forming: An Experimental Study

机译：单点增量成型的力测量：实验研究
- 作者：J. R. Duflou;A. Szekeres;P. Vanherck
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- force;
- prototyping;
- incremental;
35.Flux-Less Joining Technique of Aluminium with Zinc-Coated Steel Sheets by a Dual-Spot-Laser Beam

机译：双点激光束使铝与镀锌钢板的无焊缝连接技术
- 作者：H. Laukant;C. Wallmann;M. Korte;U. Glatzel
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser;
- aluminium;
- steel;
36.Experimental and Numerical Investigation of the Formability of Laser Welded Patchwork Blanks

机译：激光拼布毛坯成型性的实验和数值研究
- 作者：K. Lamprecht;M. Geiger
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- forming;
- finite element method;
- patchwork blank;
37.Experimental and Numerical Study of Intense Shear Banding for Al-Alloy under Uniaxial Tension

机译：单轴拉伸下铝合金强剪切带的实验与数值研究
- 作者：X. Duan;M. Jain;M. Bruhis;D. S. Wilkinson
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- FEM;
- fracture;
- localization;
38.Finite Element Modeling of Incremental Forming of Aluminum Sheets

机译：铝板增量成形的有限元建模
- 作者：S. He;A. Van Bael;P. Van Houtte;A. Szekeres;J. R. Duflou;C. Henrard;A. M. Habraken
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- finite element method;
- experimentation;
- incremental forming;
39.Effective Stripper-Holding on High Speed Precision Blanking of Electronic Machine Parts

机译：有效剥离器夹持电子零件的高速精密落料
- 作者：F. Sekine
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- press;
- blanking;
- die;
40.Do Advanced Material Models Contribute to Accuracy in Industrial Sheet Forming Simulations?

机译：先进的材料模型是否有助于工业板材成型仿真的准确性？
- 作者：A. H. van den Boogaard;H. H. Wisselink;J. Huetink
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal;
- finite element method;
- aluminium;
41.Die Surface Structures and Hydrostatic Pressure System for the Material Flow Control in High-Pressure Sheet Metal Forming

机译：高压板料成形中材料流动控制的模具表面结构和静液压系统
- 作者：R. Krux;W. Homberg;M. Kalveram;M. Trompeter;M. Kleiner;K. Weinert
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- tribology;
- surface;
- sheet metal hydroforming;
42.Distortion Minimization in Remote Welding of Steel

机译：钢的远程焊接中的变形最小化
- 作者：C. Thomy;M. Schilf;T. Seefeld;G. Sepold;F. Vollertsen
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- welding;
- deformation;
- sheet metal;
43.Deformation Behaviour of Sheet Metals in Laser-Assisted Hydroforming Processes

机译：激光辅助液压成形过程中钣金的变形行为
- 作者：H. K. Toenshoff;J. Bunte;O. Meier;L. Engelbrecht
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- hydroforming;
- laser;
- forming limit curves;
44.Custom Manufacture of a Solar Cooker - A Case Study

机译：定制生产太阳能灶具-案例研究
- 作者：J. Jeswiet;J. R. Duflou;A. Szekeres;P. Lefebvre
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal;
45.Determination of Friction Coefficients for the FE-Analysis of Sheet Forming of Tailored Welded Blanks

机译：量身定做的焊接毛坯板材有限元分析的摩擦系数确定
- 作者：M. Tolazzi;M. Merklein
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- tribology;
- sheet metal;
- tailored blank;
46.Comparison of FEM Simulations for the Incremental Forming Process

机译：增量成型过程的有限元模拟比较
- 作者：C. Henrard;A. M. Habraken;A. Szekeres;J. R. Duflou;S. He;A. Van Bael;P. Van Houtte
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- finite element method;
- identification;
- incremental forming;
47.Chances and Challenges in Joining by Forming with a Flat Counter Tool

机译：用平面计数器工具进行连接的机会和挑战
- 作者：R. Neugebauer;R. Mauermann;S. Dietrich
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- assembly;
- finite element method (FEM);
- joining by forming;
48.Numerical-Stochastic Modeling and Simulation of Deep Drawing Tinplate Rings

机译：拉深马口铁环的数值随机建模与仿真
- 作者：B. Barisic;T. Pepelnjak;K. Kuzman
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- deep drawing;
- modeling;
- experimental design;
49.Novel Concept of Experimental Setup for Characterisation of Plastic Yielding of Sheet Metal at Elevated Temperatures

机译：用于表征高温下塑性塑性屈服的实验装置的新概念
- 作者：M. Geiger;G. van der Heyd;M. Merklein;W. Hussnaetter
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- material characterisation;
- sheet metal forming;
- system technology;
50.Modelling and Analysis of Integrated Hotforming and Quenching Processes

机译：集成热成型和淬火过程的建模与分析
- 作者：D. Lorenz;K. Roll
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- hot forming;
- heat treatment;
- finite element method;
51.Methods for Monitoring of Laser Cutting by Means of Acoustic and Photodiode Sensors

机译：通过声光二极管传感器监测激光切割的方法
- 作者：J. De Keuster;J. R. Duflou;J.-P. Kruth
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser beam machining;
- monitoring;
- opto-acoustic;
52.Non-Traditional Forming Limit Diagrams for Incremental Forming

机译：增量成型的非传统成型极限图
- 作者：J. Jeswiet;D. Young;M. Ham
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- cold forming;
- sheet metal;
53.Non-Vacuum Electron Beam Welding

机译：非真空电子束焊接
- 作者：U. Dilthey;A. Gumenyuk;H. Masny
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- welding;
- electron beam machining;
- application;
54.New Approach for Process Planning and Optimization in Sheet Metal Spinning

机译：钣金旋压工艺规划和优化的新方法
- 作者：R. Goebel;M. Kleiner;N. Henkenjohann
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- spinning;
- planning;
- optimization;
55.Metal Flow and Die Filling in Coining of Micro Structures with and without Flash

机译：带有和不带有飞边的微结构压印中的金属流动和模具填充
- 作者：M. Thome;G. Hirt;B. Rattay
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- miniaturization;
- tool;
- micro metal coining;
56.Microstructural Changes Determining Joint Strength in Friction Stir Welding of Aluminium Alloys

机译：铝合金搅拌摩擦焊接接头强度的显微组织变化
- 作者：A. Barcellona;G. Buffa;D. Contorno;L. Fratini;D. Palmeri
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- welding;
- friction;
- microstructure;
57.Joining of Steel-Aluminium Hybrid Structures with Electron Beam on Atmosphere

机译：钢-铝混合结构与电子束在大气中的连接
- 作者：F.-W. Bach;A. Beniyash;K. Lau;R. Versemann
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- welding;
- electron beam machining;
- steel-aluminium hybrid structures;
58.Laserforming of 3D Features

机译：3D功能的激光成型
- 作者：J. R. Duflou;B. Callebaut;J.-P. Kruth
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser;
- forming;
- 3D features;
59.Lubrication of Aluminium Sheet Metal within the Automotive Industry

机译：汽车工业中铝薄板的润滑
- 作者：M. Meiler;H. Jaschke
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- friction;
- forming;
- lubrication;
60.Improvement of Formability in Tube Hydroforming by Reduction of Friction with a High Viscous Fluid Flow

机译：通过减少高粘性流体的摩擦来提高管液压成型的可成型性
- 作者：M. Geiger;P. Dal Bo;J. Hecht
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- tube hydroforming;
- friction;
- high viscous fluid;
61.Influence of Magnetic Fields on Dilution During Laser Welding of Aluminium

机译：铝激光焊接过程中磁场对稀释的影响
- 作者：C. Thomy;F. Vollertsen
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser;
- welding;
- magnetic stirring;
62.High-Power Fibre Lasers - Application Potentials for Welding of Steel and Aluminium Sheet Material

机译：高功率光纤激光器-钢和铝板材料焊接的应用潜力
- 作者：C. Thomy;T. Seefeld;F. Vollertsen
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser;
- welding;
- high-power fibre laser;
63.High Quality Magnesium Sheets for Automotive Applications

机译：汽车应用的优质镁薄板
- 作者：F.-W. Bach;M. Rodman;A. Rossberg
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- magnesium;
- sheet metal;
- processing;
64.Size-Effects in Micro-Metal Sheet Forming of Unalloyed Copper and Brass

机译：非合金铜和黄铜的微金属板成形中的尺寸效应
- 作者：M. C. Tsai;Y. A. Chen;C. F. Wu;F. K. Chen
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- hardness;
- miniaturization;
- micro-tensile experiment;
65.Flexibly Rolled Sheet Metal and Its Use in Sheet Metal Forming

机译：柔性轧制钣金及其在钣金成型中的应用
- 作者：R. Kopp;C. Wiedner;A. Meyer
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal forming;
- simulation;
- optimization;
66.Finite Element Analysis for Deep Drawing of Tailored Heat Treated Blanks

机译：量身定制的热处理坯料深冲的有限元分析
- 作者：M. Kerausch;M. Merklein;D. Staud
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- deep drawing;
- aluminum;
- tailored heat treated blank;
67.FE Simulation of Sheet Metal Forming - State of the Art in Automotive Industry

机译：钣金成型的有限元模拟-汽车工业的最新技术
- 作者：H. J. Haepp;M. Rohleder
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal forming;
- die development process;
- springback compensation;
68.FE Simulation of Laser Assisted Bending

机译：激光辅助弯曲的有限元模拟
- 作者：M. Pitz;M. Merklein
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- bending;
- steel;
- simulation;
69.Finite Element Analysis of Plate Bending Problems Using Transition Plate Elements

机译：过渡板单元的板弯曲问题有限元分析
- 作者：B. Kanber;O. Y. Bozkurt
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- finite element method;
- bending;
- plate transition elements;
70.Enhanced Semi-Analytical Process Simulation of Air Bending

机译：增强的空气弯曲半分析过程仿真
- 作者：N. Ridane;D. Jaksic;M. Kleiner;B. Heller
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal;
- simulation;
- elastic machine behaviour;
71.Developments and Trends in Laser Welding of Sheet Metal

机译：钣金激光焊接的发展与趋势
- 作者：F. Vollertsen
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser;
- welding;
72.Determination of Mechanical Properties for the Hydroforming of Magnesium Sheets at Elevated Temperature

机译：高温下镁片液压成型机械性能的确定
- 作者：J. Hecht;S. Pinto;M. Geiger
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- magnesium;
- sheet metal;
- hydroforming;
73.Comparison of Material Behavior and Economic Effects of Cold and High Temperature Forming Technologies Applied to High-Strength Steels

机译：高强度钢冷热成型技术的材料性能和经济效果比较
- 作者：R. Neugebauer;A. Goeschel;A. Sterzing;P. Kurka;M. Seifert
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- high-strength steel;
- material behavior;
- forming at elevated temperatures;
74.Computing Welding Distortion: Comparison of Different Industrially Applicable Methods

机译：计算焊接变形：不同工业适用方法的比较
- 作者：D. Tikhomirov;B. Rietman;K. Kose;M. Makkink
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- simulation;
- welding;
- distortion;
75.Tribological Investigations on Coated Steel Sheets Using the Dry Film Lubricant Drylube E1

机译：使用干膜润滑剂Drylube E1对涂层钢板进行的摩擦学研究
- 作者：M. Tolazzi;M. Meiler;M. Merklein
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- tribology;
- sheet metal;
- dry film lubricant;
76.The Significance of Experiment in the Finite Element Analysis of a Pulley Forming Process

机译：实验对滑轮成形过程有限元分析的意义
- 作者：X. Liu;M. Daniels;B. Shirvani
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- pulley;
- metal forming;
- experiment;
77.Buckling Texturing Technology for Increase in Stability of Thin Sheet Metal Structures - Simulation and Application

机译：屈曲变形技术以提高金属薄板结构的稳定性-仿真和应用
- 作者：A. W. Behrens;J. Ellert
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- intelligent processing of materials;
- strategies;
- FEM;
78.The Design of an Incremental Sheet Forming Machine

机译：增量片材成型机的设计
- 作者：J. M. Allwood;N. E. Houghton;K. P. Jackson
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet;
- forming;
- incremental;
79.Surface Inspection System for Large Sheet Metal Parts

机译：大型钣金件表面检测系统
- 作者：B. Denkena;F. Berg;W. Acker
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- optical;
- inspection;
- stripe pattern;
80.Closed-Loop-Control of the Material Flow in the Deep Drawing Process

机译：拉深过程中物料流的闭环控制
- 作者：B.-A. Behrens;J.-W. Yun;M. Milch
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- production;
- deep drawing;
- closed-loop-control;
81.Basic Investigations on the Hot Stamping Steel 22MnB5

机译：22MnB5热冲压钢的基础研究
- 作者：M. Geiger;M. Merklein;C. Hoff
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- heat treatment;
- sheet metal;
- hot stamping;
82.An Automatic Cost Calculation System for 3-D Laser Cutting Based on Characteristic Numbers

机译：基于特征数的3D激光切割自动成本计算系统
- 作者：M. Masur;F. Liebana;U. Stute
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- computer automated process;
- laser cutting;
- cost planning;
83.A Study of the Effect of Process Variables on the Stamp forming of Rectangular Cups using Fibre-Metal Laminate Systems

机译：用纤维-金属层压系统研究工艺变量对矩形杯压模成型的影响
- 作者：L. Mosse;W. Cantwell;M. J. Cardew-Hall;P. Compston;S. Kalyanasundaram
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- forming;
- composite;
- laminates;
84.A New Robot-Based Sheet Metal Forming Process

机译：基于机器人的钣金成形新工艺
- 作者：H. Meier;O. Dewald;J. Zhang
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- robot;
- sheet metal;
- forming;
85.A New Approach for Optimization of Sheet Metal Components

机译：优化钣金零件的新方法
- 作者：A. Albers;H. Weiler;D. Emmrich;B. Lauber
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- optimization;
- sheet metal;
- stiffness;
86.3D-Characterisation of Sheet Metal and Roller Surfaces by Means of Confocal Microscopy

机译：借助共聚焦显微镜对钣金和辊子表面进行3D表征
- 作者：J. Valentin;M. A. Weber;R. Brodmann;A. Sharp
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- optical;
- metrology;
- sheet metal;
87.A Framework for Automatic Tool Selection in Integrated CAPP for Sheet Metal Bending

机译：集成CAPP中用于钣金弯曲的自动工具选择框架
- 作者：T. H. M. Nguyen;J. R. Duflou;J.-P. Kruth
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- CAPP;
- sheet metal bending;
- tool selection;
88.Statistical Investigations on Friction Stir Welded Aluminum Tailored Blanks for a Robust Process Window

机译：坚固的工艺窗口用摩擦搅拌焊接的铝制拼缝板坯的统计研究
- 作者：A. Giera;M. Merklein;M. Geiger
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- aluminum;
- statistical;
- welding;
89.Rapid Parametric Process Design Using FEM Analysis

机译：使用有限元分析的快速参数化工艺设计
- 作者：M. Tisza;Z. Lukacs;M. Tisza jr.
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- computer aided process planning;
- FEM simulation;
- process optimization;
90.Rapid Tooling by Laminated Object Manufacturing of Metal Foil

机译：金属箔层压制品制造的快速加工
- 作者：M. Prechtl;A. Otto;M. Geiger
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser welding;
- laser cutting;
- diffusion welding;
91.Quantitative Validation of FEM Simulations for Incremental Sheet Forming Using Optical Deformation Measurement

机译：使用光学变形测量对增量板成形的有限元模拟的定量验证
- 作者：M. Bambach;G. Hirt;J. Ames
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- finite element method (FEM);
- sheet metal;
- computer numerical control (CNC);
92.Problem Specific Design of Actuators for Micro Adjustment

机译：微调执行器的特定问题设计
- 作者：H. Hagenah;T. Wurm
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- design;
- actuator;
- micro adjustment;
93.Optimisation of Springback Predicted by Experimental and Numerical Approach by Using Response Surface Methodology

机译：基于响应面法的实验和数值方法预测的回弹优化
- 作者：R. Bahloul;P. Dal Santo;A. Mkaddem;A. Potiron
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- springback;
- optimisation;
- response surface methodology;
94.Forces in Single Point and Two Point Incremental Forming

机译：单点和两点增量成形中的力
- 作者：J. Jeswiet;J. R. Duflou;A. Szekeres
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- force;
- sheet forming;
95.Use of Zinc-Alloys for Low Temperature Soldering of Zinc Coated Steels

机译：锌合金在镀锌钢的低温焊接中的应用
- 作者：J. Wilden;J. P. Bergmann;M. Dolles;S. Reich
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- laser;
- soldering;
- zinc coated steel;
96.Tolerance Analysis of Sheet Metal Assemblies with Focus on Non-Rigid Geometry

机译：以非刚性几何为中心的钣金装配体公差分析
- 作者：R. Lustig;R. Hochmuth;H. Meerkamm
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- modelling;
- process planning;
- reliability;
97.Trends and Developments in Intelligent Computer Aided Design of Progressive Dies

机译：递进模智能计算机辅助设计的发展趋势
- 作者：S. Kumar;R. Singh
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- artificial intelligence (AI);
- computer aided design (CAD);
- die design;
98.Transient simulation of Electromagnetic Forming of Aluminium Tubes

机译：铝管电磁成形的瞬态模拟
- 作者：C. Karch;K. Roll
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- finite element method (FEM);
- aluminum;
- electromagnetic forming;
99.Tube and Sheet Hydroforming-Advances in Material Modeling, Tooling and Process Simulation

机译：管和板的液压成型-材料建模，工装和工艺仿真方面的进展
- 作者：T. Altan;H. Palaniswamy;Y. Aue-u-Ian
- 会议名称：《International Conference on Sheet Metal; 20050405-08; Erlangen-Nuremberg(DE)》 | 2005年
- sheet metal;
- tube;
- hydroforming;