首页>外文会议>其他>International Society for the Advancement of Material and Process Engineering technical conference

International Society for the Advancement of Material and Process Engineering technical conference

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Effect of cure conditions on mechanical and thermal properties of siloxane-modified phenolic resins and composites

机译：固化条件对硅氧烷改性酚醛树脂和复合材料机械和热性能的影响
- 作者：A. Tregub;L. Inglehart;C. Pham;R. Friedrich
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Phenolic resin;
- Cure;
- Thermoanalytical technique;
2.High strain rate behavior of the component materials of an integral armor

机译：一体式装甲的元件材料的高应变率行为
- 作者：Hassan Mahfuz;Bazle A. Gama;Roshan P. Raines;Anwarul Haque;Uday K. Vaidya;Shaik Jeelani
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Integral armor;
- High strain rate characterization;
- Composite armored vehicle (CAV);
3.Qualitative versus quantitative nondestructive evaluation techniques for composites

机译：用于复合材料的定性与定量无损评估技术
- 作者：Richard M. Boxwell
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composites;
- Composite structures;
- Non-destructive evaluation;
4.Models for the analysis of impacts on composite structures

机译：复合结构影响分析的模型
- 作者：Serge Abrate
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Impact;
- Composite structures;
- Dynamics;
5.Emerging strategies for environmental control of perfluorocompounds in semiconductor manufacturing

机译：半导体制造中全氟化合物环境控制的新策略
- 作者：Ralph E. Taylor-Smith;Christianne M. Alavanja
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Pollution prevention;
- Perfluorocompounds;
- Electrochemical degradation;
6.Adhesive and composite properties of cured imide oligomers containing pendent and terminal phenylethynyl groups

机译：固化酰亚胺低聚物的粘合剂和复合性能，含有末端苯基乙炔基的固化酰亚胺低聚物
- 作者：J. W. Connell;J. H. Smith Jr.;P. M. Hergenrother
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
7.Complex preforms in net shape and high volumes

机译：复杂的净形状和高容量的预制件
- 作者：Daniel T. Buckley
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
8.Process model for SynSpand syntactic film

机译：SynSpand句法电影的过程模型
- 作者：Alex Wong
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- SynSpand;
- Expansion;
- Cure kinetics;
- Chemoviscosity;
- Modeling;
- Expandable microsphere;
- Pressure;
- Heat transfer;
9.Multiple-station flexural creep test apparatus

机译：多站弯曲蠕变试验装置
- 作者：Scott L. Coguill;Donald F. Adams
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Creep;
- Flexural creep testing;
- Testing equipment;
- Composite materials;
10.A novel moldable phenolic sandwich composite with outstanding fire and mechanical performance

机译：一种新型可成型酚醛夹芯复合材料，具有出色的火和机械性能
- 作者：Steven G. Katz;Andrew L. Bastone
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Syntactic foams;
- Sandwich construction;
- Fire;
11.Superplastic diaphragm forming of thermoplastic complex shaped composites as a cost effective manufacturing process

机译：热塑性复合复合材料的超塑性隔膜形成为具有成本效益的制造工艺
- 作者：Jan Harper-Tervet;Scott Reeve;Jerry Schwarz;robert Stratton;Fred Tervet;Anthony J. Barnes;Tia Benson Tolle
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composites;
- Thermoplastic;
- Super plastic forming (SPF);
12.A feedback system to obtain an optimum cure cycle for thermoset matrix composites

机译：一种反馈系统，用于获得热固性矩阵复合材料的最佳固化循环
- 作者：Mohamed S. Genidy;Madhu S. Madhukar;John D. Russell
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Cure cycle;
- Thermoset resins;
- Residual stresses;
13.'Environmentally and user friendly' phenolic resin for pultrusion

机译：用于拉挤的“环保和用户友好”的酚醛树脂
- 作者：A. Boettcher;L. A. Pilato;M. W. Klett
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Pultrusion;
- Resole phenolic resin;
- F/S/T properties;
- Low emissions;
- Mechanical properties;
14.An assessment of the DARPA affordable polymer matrix composite program

机译：评估DARPA实惠的聚合物矩阵复合程序
- 作者：Lisa C. Veitch;C. Robert Crowe
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composite processes;
- Polymer matrix composites (PMCs);
15.Non-axisymmetric filament winding for elbows based on the quasi-geodesics

机译：基于准大测地测的肘部非轴对称灯丝绕组
- 作者：Y. D. Liang;Z. Q. Zou;Gene Luo
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Filament winding;
- Fiber paths;
- Geodesics;
- Semi-geodesics;
- Quasi-geodesics;
- Friction coefficient;
16.Effect of copper on the curing and structure of a DICY-containing epoxy composite system. part II.

机译：铜对含二氢环氧复合体系的固化与结构的影响。第二部分。
- 作者：M. Gundjian;K. C. Cole
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Epoxy resins;
- Curing agents;
- Printed wiring boards;
17.Manufacturing of composite integral armor using liquid molding processes

机译：使用液体成型工艺制造复合整体铠装
- 作者：U. K. Vaidya;A. Abraham;H. Mohamed;K. Fotedar;A. Haque;J. Krishnagopalan;H. Mahfuz;S. Jeelani
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composite integral armor;
- Resin transfer molding;
- Resin infusion molding;
18.Layer by layer E-beam curing of filament wound composite materials with low energy electron beam accelerators

机译：层通过长丝缠绕复合材料的层电子束固化，具有低能量电子束促进剂
- 作者：F. Guasti;N. Kutufa;G. Matticari;E. Rosi
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
19.Laminate quality assessment through multi-dimensional ultrasonic C-scan analysis

机译：通过多维超声C扫描分析层压质量评估
- 作者：R. A. M. Coenen;L. B. Vogelesang
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- ARALL;
- Laminates;
- Non-destructive evaluation;
20.Waste reduction for the composite industry

机译：复合行业的废物减少
- 作者：John F. Unser
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composites;
- Environmental;
- Manufacturing/fabrication/processing;
- pollution prevention;
- recycling;
21.High frequency fatigue of continuous silicon carbide fiber reinforced silicon nitride (SiC{sub}f/Si{sub}3N{sub}4) matrix composites

机译：连续碳化硅纤维增强氮化硅的高频疲劳（SiC {Sub} F / Si {Sub} 3N {Sub} 4）矩阵复合材料
- 作者：Hassan Mahfuz;Khalid Eltom;Partha S. Das;Uday Vaidya;Sunil Sodah;Shiek Jeelani
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Monotonic;
- Fatigue;
- Residual fatigue and SEM micrograph;
22.Advanced composite materials for air-cooled electronic enclosures

机译：用于空气冷却电子外壳的先进复合材料
- 作者：Patricia L. Smaldone
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Thermal management;
- Heatsinks;
23.Latent cobalt promoters and high activity organic peroxides in pultrusion applications

机译：拉挤型胶质钴促进剂和高活性有机过氧化物
- 作者：Steven P. Bitler;David A. Kamp;Michele C. Johnson;Hanno Wolf;Eloy C. Martinez
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Filament winding;
- Initiators and catalysts;
- Pultrusion;
- Thermoset resins/polymers;
24.Mechanics of cross-ply composite support ring in electrical generator stator windings

机译：发电机定子绕组中交叉帘布层复合支撑环的力学
- 作者：Mark L. Miller;Henry M. Holly
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composite components;
- Mechanical properties;
- Prepregs;
- Glass reinforcements;
- Epoxy resins;
- Thermal analysis;
- Generator;
25.Unique monitoring of cure and shelf life of polymeric materials

机译：对聚合物材料的固化和保质期的独特监测
- 作者：A. Brent Strong;R. Scott Merrell;Barry M. Lunt
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Cure monitoring;
- Manufacturing/fabrication/processing;
- Shelf life;
26.Interaction of variables in vibration welding of continuous fiber reinforced thermoplastics

机译：连续纤维增强热塑性塑料振动焊接变量的相互作用
- 作者：R. Rudolf;M. Neitzel;W. Strohfuss
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Joining;
- Vibration welding;
- Fabric reinforced thermoplastics;
27.An evanescent wave fluorescence fiber optic flow sensor for resin transfer molding

机译：用于树脂转移成型的蒸发波荧光光纤传感器
- 作者：Roopesh Mathur;Suresh G. Advani;Richard S. Parnas;Bruce K. Fink
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Molding;
- Fiber optics;
- Flow sensors;
28.Low-cost processing of moderately-loaded composite bulkheads for aircraft structures

机译：用于飞机结构的中间装载复合舱壁的低成本处理
- 作者：R. D. Cathcart;A. A. Faoro;B. J. Guzzardo;A. R. Masse
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composite structures;
- Processing;
- Preforms;
29.Stitch compliance in delaminated composites

机译：缝合符合分层的合规性
- 作者：Daniel O. Adams
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composite structures;
- Textile reinforcement;
- Delamination resistance;
30.Low temperature cure composite for corrosion-resistant HMMWV vehicle repair patch

机译：低温固化复合材料用于耐腐蚀HMMWV车辆修复贴片
- 作者：Robert F. Kovar;Carolyn Westmark;John Player;Thomas Tiano
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Low temperature cure composite patch;
31.Gas plasma treatment of Kevlar and spectra fabrics for advanced composites

机译：高原复合材料凯夫拉和光谱织物的气体等离子体
- 作者：Stephen L. Kaplan;Wally P. Hansen
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Advanced composites;
- Kevlar;
- Spectra;
32.Study of blister initiation and growth in a high-temperature polyimide

机译：高温聚酰亚胺的泡罩起始和生长研究
- 作者：Brian P. Rice;C. William Lee
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Blister;
- Diffusion;
- High-temperature polyimides;
- Hygrothermal performance;
33.Composite HDF~TM, A New Natural Fiber Based Composite material For Engineering Applications

机译：复合HDF〜TM，一种用于工程应用的新型天然纤维基复合材料
- 作者：Robert Clausi;Scott Moore;Shujjat Ahmed
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Natural Fibers;
- Composite;
- Environmental/Recycling;
34.Room temperature storable prepregs: an advancement in prepreg resin

机译：室温可存储预浸料：预浸料树脂的进展
- 作者：Rolf M. Johns;Craig W. Schiffman
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
35.Effect of cure cycle on the specific volume of 3501-6 epoxy

机译：固化循环对3501-6环氧树脂的特异性体积的影响
- 作者：John D. Russell;Andre Y. Lee
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Volumetric dilatometry;
- Thermoset resins;
- Cure shrinkage;
- Residual stress;
36.Nondestructive inspection of heat damage to graphite-epoxy laminates using diffuse reflectance fourier transform infrared spectroscopy (DRIFTS)

机译：使用漫反射突变变换红外光谱（漂移）对石墨环氧树脂层压板的热损伤无损检测
- 作者：G. Louis Powell;christopher J. Janke;Tye. E. Barber
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composites;
- Epoxy resins;
- Graphite;
- Non-destructive evaluation;
- Degradation;
- Delamination resistance;
- Testing equipment;
37.Devolatilization in the processing of AFR700B polyimide resin composites

机译：AFR700B聚酰亚胺树脂复合材料加工中的脱挥发化
- 作者：J. L. Vasat;J. L. Kardos
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Cure monitoring;
- High temperature composites;
- Polyimides;
38.Particulate elastomeric modification of epoxy-based carbon fiber prepreg systems

机译：环氧基碳纤维预浸料系统的颗粒状弹性修饰
- 作者：Brian S. Hayes;Fulcanelli S. Chavez;James C. Seferis;Edward Anderson;Jayant Angal
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Epoxy based prepreg;
- Particulate elastomers;
- Interlaminar fracture toughness;
39.The application of SCRIMP VARTM fabrication technology to the compressed natural gas integrated storage system

机译：Scripp Vartm制造技术在压缩天然气集成存储系统中的应用
- 作者：Paul D. Wienhold;John J. Wozniak
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- SCRIMP;
- VARTM;
- Natural gas vehicles;
40.Adhesive bondline study using design of experiment technique

机译：使用实验技术设计粘合剂键合研究
- 作者：Brett Bonnet;Paul Mehrkam
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Adhesive;
- Repair;
- Design of experiments;
41.Adhesive bonding of composite ribbon during automated tow placement

机译：复合丝带在自动牵引件期间的粘合剂粘合
- 作者：Ray W. Grenoble;Bernadette C. Messier;Joseph M. Marchello;Harry L. Belvin;Norman J. Johnston
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Thermoplastic;
- Adhesive bonding;
- Fiber placement;
42.Vapor grown carbon fiber composites with epoxy and poly (phenylene sulfide) matrices

机译：蒸汽生长碳纤维复合材料与环氧树脂和聚（亚苯基硫化物）基质
- 作者：R. D. Patton;C. U. Pittman Jr.;L. Wang
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Vapor grown carbon fibers;
- Composites;
- Processing;
- Low cost;
43.Bending of stiffened composite laminates

机译：加强复合层压板的弯曲
- 作者：I. E. Harik;M. W. Guo;C. M. Madasamy
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Laminated stiffened plates;
- Finite element method;
- Layered zigzag model;
44.The role of breathers and volatiles in the manufacturing of composite structures

机译：呼吸和挥发物在复合结构制造中的作用
- 作者：J. E. Shafizadeh;B. S. Hayes;J. C. Seferis;M. P. Thompson
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Vacuum bagging;
- Breathers;
- Volatiles;
45.Computer simulation of the drapeability of reinforcement textiles for composites using the finite element method

机译：计算机仿真使用有限元方法对复合材料加固纺织品的可铺展性
- 作者：Chokri Cherif;Ralf Kaldenhoff;Burkhard Wulfhorst
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Drapeability;
- Woven fabrics;
- Knitted multiaxial layers;
46.Development of practical ground coil by RIM method

机译：边缘方法开发实用地线
- 作者：M. Suzuki;T. Fujimoto;K. Sawada;N. Aihara
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- RIM;
- Ground coil;
- MAGLEV;
47.Manufacturing and low velocity impact response of innovative sandwich composites

机译：创新夹心复合材料的制造和低速影响响应
- 作者：U. K. Vaidya;M. V. Kamath;H. Mahfuz;S. Jeelani
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Sandwich composites;
- Z-fiber reinforcement;
- Foam core;
- Truss core;
- Low velocity impact damage;
48.Characterization of ultrasonically welded PEEK-carbon composites

机译：超声焊接PEEK碳复合材料的特征
- 作者：B. Harras;K. C. Cole;T. Vu-Khanh
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- PEEK/C.;
- Ultrasonic welding;
- Characterization;
49.Efficient composite fabrication using slurry preforms

机译：使用浆料预制件的高效复合制造
- 作者：Bruce N. Greve
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Wet lay;
- Slurry;
- Chopped fiber;
- Preforms;
50.A novel high speed, high resolution, ultrasound imaging system

机译：一种新型高速，高分辨率，超声成像系统
- 作者：Marvin Lasser
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Non-destructive evaluation;
- Imaging;
- Real-time;
51.Non-Autoclave processing of advanced composite repairs

机译：非高压灭菌加工先进的复合性修理
- 作者：Glen R. Sherwin
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composites;
- Repair;
- Structures;
52.Thermal shock and thermal cycling behavior of fiber reinforced glass matrix composites

机译：纤维增强玻璃基复合材料的热冲击和热循环行为
- 作者：A. R. Boccaccini;A. J. Strutt;D. H. Pearce;K. S. Vecchio
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Glass matrix composites;
- Thermal shock;
- Microstructural damage;
53.An overview of the fire behavior of advanced engineering and fire hardened polymers

机译：先进工程和防火聚合物的火灾行为概述
- 作者：Archibald Tewarson
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
54.Identification of support conditions for composite beams and plates from natural frequencies

机译：识别来自自然频率的复合梁和板的支撑条件
- 作者：Serge Abrate;Gregory Schoeppner
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composite structures;
- Structural analysis;
- Identification;
55.Model epoxy adhesive systems: influence of prereaction methods

机译：模型环氧粘合剂系统：术治疗方法的影响
- 作者：Jeremy H. Klug;James C. Seferis
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Epoxy resins;
- Thermal analysis;
- Fracture toughness;
56.Finite element analysis of composite isogrid cylinders

机译：复合ISOGrid气缸的有限元分析
- 作者：Hassan Mahfuz;Mojibur Rahman;Partha S. Das;Uday K. Vaidya;Shaik Jeelani
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Finite element method;
- Compaction;
- Isogrid;
- Axial loading;
- Parametric study;
57.Composite HDF, a new natural fiber based composite material for engineering applications

机译：复合HDF，一种用于工程应用的新型天然纤维基复合材料
- 作者：Robert clausi;Scott Moore;Shujjat Ahmed;Scott Reeve;Fred Tervet
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Natural fibers;
- Composite;
- Environmental/recycling;
58.Optimum fiber orientations for laminated plates under uniform loads

机译：均匀载荷下层压板的最佳纤维取向
- 作者：Serge Abrate
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Design;
- Laminates;
- Structural analysis;
59.Intumescent resin system for improving fire resistance of composites

机译：膨胀树脂系统，用于改善复合材料的耐火性
- 作者：Shahid P. Qureshi;Daniel W. Krassowski
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
60.Study on the behavior of accelerated ageing fabric-reinforced epoxy composites

机译：加速老化织物增强环氧复合材料的行为研究
- 作者：Zanzhong Zhang;Zilong Liao;Ping Liu
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
61.Different lay-up procedure influences on final porosity distribution in a carbon/toughened epoxy structural composite system

机译：碳/钢化环氧结构复合体系中最终孔隙率分布的不同铺设程序
- 作者：Sang-Beom Shim;James c. Seferis;William Hudson
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Hand lay-up;
- Bagging;
- Prepregs;
62.Engineered textile preforms for RTM: a comparison of braiding, knitting and weaving technologies

机译：RTM的工程纺织品预架构：编织，针织和编织技术的比较
- 作者：Steven Clarke
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Textile preforms;
- Net shape;
- Advanced composites;
63.Pultruded fiber reinforced poly (ethylene oxide) toughened novolac type phenolic resin: mechanical properties, thermal stability, and flame retardance

机译：拉挤纤维增强聚（环氧乙烷）增韧酚醛清漆型酚醛树脂：机械性能，热稳定性和阻燃性
- 作者：Chen-chi M. Ma;Chih-Tsung Lee;Hew-Der Wu
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Pultrusion;
- Novolac type phenolic resin;
- Poly (ethylene oxide);
- Mechanical properties;
- Thermal stability;
- Flame retardance;
64.Manufacture and Mechanical Properties of a High performance Thermosetting Poly(etherimide)/Continuous Carbon Fiber Composite

机译：高性能热固性聚（醚酰亚胺）/连续碳纤维复合材料的制造和力学性能
- 作者：T.A.Bullions;R.Mehta;B.Tan;J.E.McGrath;A.C.Loos
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Poly(etherimide) Thermosets;
- High Temperature Composites;
- Powder Prepregging;
65.Phenolic resins: options for the new millennium

机译：酚醛树脂：新千年的选择
- 作者：T. H. Dailey Jr.
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Phenolics;
- Fire;
- Applications - industrial/commercial;
66.Selectively reinforcing composites by magnetic processing

机译：通过磁加工选择性地加固复合材料
- 作者：Edward J. Vinarcik
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Composites;
- Manufacturing/fabrication/processing;
- Magnetic;
67.The electron beam cure of fiberglass/epoxy prepregs

机译：玻璃纤维/环氧预浸料的电子束固化
- 作者：Jeffrey D. Farmer;Christopher J. Janke;Vincent J. Lopata
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
68.Optimization of materials and processes on co-cured composite honeycomb panels

机译：共固化复合蜂窝板的材料和工艺优化
- 作者：Paul K. Nelson
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Honeycomb;
- Nomex;
- Syntactic;
- Fiberglass;
- Carbon;
- Lateral compression;
69.Novel bioabsorbable polyphosphate/soy protein plastic composites

机译：新型生物可吸收多磷酸盐/大豆蛋白塑料复合材料
- 作者：Joshua U. Otaigbe;Daniel O. Adams
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Biodegradable soy protein plastic composites;
- Bioabsorbable polyphosphates;
70.Viscoelastic creep characteristics of neat and E-glass reinforced thermoset resins

机译：纯净和E-玻璃增强热固性树脂的粘弹性蠕变特性
- 作者：P. M. Puckett;S. W. Bradley;W. L. Bradley;H. -J. Sue
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Vinyl ester resins;
- Creep compliance;
- Structural composites;
71.A study of titanium surface pretreatments for bonding with polyimide and epoxy adhesives

机译：用聚酰亚胺和环氧粘合剂粘合钛表面预处理研究
- 作者：Jonahira R. Arnold;Chanda D. Sanders;Dennis L. Bellevou;Anthony A. Martinelli;Georgette B. Gaskin
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Adhesives;
- Surface preparation;
- Titanium;
72.Manufacture and mechanical proper ties of a high performance thermosetting poly (etherimide)/continuous carbon fiber composite

机译：高性能热固性聚（醚酰亚胺）/连续碳纤维复合材料的制造和机械适当的关系
- 作者：T. A. Bullions;R. Mehta;B. Tan;J. E. McGrath;A. C. Loos
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Poly(etherimide) thermosets;
- High temperature composites;
- Powder prepregging;
73.Two-dimensional non-axisymmetric filament winding patterns

机译：二维非轴对称灯丝绕组图案
- 作者：Y. D. Liang;Gene Luo
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Filament winding;
- Fiber path;
- Networks;
- Graph theory;
- Conjugate patterns;
- Interweaving matrices;
- Interweaving degrees;
74.Development of fiber-glass composite monocoque frames for city bicycles fabricated by S-RTM and overlay joining

机译：由S-RTM制造的城市自行车纤维玻璃复合单胶片框架的开发和覆盖连接
- 作者：Yutaka Yagi;Toru Fujii;Minoru Abe
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Bicycle;
- FRP;
- S-RTM;
- Glass fabrics;
- Vinylester;
75.Rate dependent compressive response of S2-glass/vinylester composites

机译：S2-玻璃/乙烯酯复合材料的速率依赖性压缩响应
- 作者：A. Haque;M. Ali;U. K. Vaidya;H. Mahfuz;S. Jeelani
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- High strain rate effects;
- S2-glass/vinylester composites;
- Hopkinson bar test;
76.The use of directed fiber preforms in automotive bumper beam components

机译：在汽车保险杠梁组件中使用定向光纤预制件
- 作者：Mary Marshall;Bruce Batchelder
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Preforming;
- Composites;
- Automotive;
77.Characterization of IM7/8552 polymer composites subjected to heat damage

机译：对热损伤进行IM7 / 8552聚合物复合材料的表征
- 作者：Stanley J. Ng;Randall J. Cramer;Paul Mehrkam
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Heat damage;
- Tensile strength;
- Void content;
- TM7/8552 polymer composite;
78.Gas Plasma Treatment of Kevlar~TM and Spectra Fabrics for Advanced Composites

机译：凯夫拉〜TM的气体等离子体处理先进复合材料
- 作者：Stephen L.Kaplan;Wally P.Hansen
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Advanced Composites;
- Kevlar~TM;
- Spectra~TM;
79.Adhesive Bondline Study Using Design fo Experiment Technique

机译：使用实验技术设计粘合剂键合研究
- 作者：Brett Bonnet;Paul Mehrkam
- 会议名称：《International Society for the Advancement of Material and Process Engineering technical conference》 | 1997年
- Adhesive;
- Repair;
- Design of Experiments;