首页>外文会议>The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California

The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.AFM VIBRATION ISOLATOR WITH HIGH PERFORMANCE USING EDDY CURRENT DAMPING

机译：采用涡流阻尼的高性能AFM隔振器
- 作者：Gyung-Hoon Chung;Dae-Gab Gweon;Hoi-Won Chung;Jong-Yup Shim
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
2.Optical Measurement for Flank Wear in Peripheral Cutting Edges in Endmills

机译：立铣刀外围切削刃侧面磨损的光学测量
- 作者：Hwa-Soo LEE;Tsutomu NAGASHIMA;Hiroyuki HAGA;Tadashi WAKABAYASHI
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
3.OPTICAL MEASUREMENT OF COP DEFECTS ON SILICON WAFER SURFACE BY LASER SCATTERED DEFECT PATTERN

机译：用激光散射缺陷图案对硅晶片表面上的COP缺陷进行光学测量
- 作者：Satoru Takahashi;Takashi Miyoshi;Yasuhiro Takaya;Kenji Shirai
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
- laser applied measurement;
- surface inspection;
- silicon wafer;
- surface defects;
- COP;
4.OPTIMIZATION DESIGN OF MICRO-DIFFUSER/NOZZLE ELEMENTS AND DEVELOPMENT OF IMPLANTED DRUG DELIVERY MICROPUMP

机译：微扩散器/喷嘴元件的优化设计和植入式药物输送微泵的开发
- 作者：Yuhai Mu;Xiaodong Wang;Bryan Ngoi Kok Ann;Jacob Gan Gah Kok
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
- micropump;
- nozzle/diffuser;
- simulation;
- ANSYS;
- micro machining;
5.PERFORMANCE EVALUATION FOR VISION COORDINATE MEASURING MACHINES

机译：视觉坐标测量机的性能评估
- 作者：Chin-Chou Huang;X. David Zhang
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
6.Plate Topography Influence on the Nanogrinding Process

机译：平板形貌对纳米研磨工艺的影响
- 作者：Hans H. Gatzen;Heiko Siekmann
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
- nanogrinding;
- surface machining;
- advanced ceramics;
- grinding plate conditioning;
- grinding plate topography;
7.POLYGON-BASED LARGE DIAMETER MEASUREMENT WITH MODULAR GAUGES

机译：带有模块化量规的基于多边形的大直径测量
- 作者：Li Bin
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
8.PRECISION GRINDING APPARATUS SPECIALLY DEVELOPED FOR MICRO-CYLINDRICAL COMPONENTS

机译：专为微圆柱组件开发的精密研磨设备
- 作者：Yeo;S.H.;Zhou;M.;Tan;B.H;Balon;S.A.P.
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
- precision machine design;
- micro-grinding;
- miniature part;
9.Robust Cutting Force Control Using Indirect Force and Disturbance Estimators in the End Milling Process

机译：在立铣过程中使用间接力和扰动估算器进行鲁棒的切削力控制
- 作者：Seung-Cheol Kim;Sung-Chong Chung
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
10.Sampling and Measurement Uncertainty in Coordinate Metrology

机译：坐标计量学中的采样和测量不确定度
- 作者：Robert Edgeworth;Robert G. Wilhelm
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
11.Single Point Contributions to Free Abrasive Polishing

机译：免费磨料抛光的单点贡献
- 作者：A E Gee;D F Williams
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
12.STUDIES ON THE NATURE OF SURFACE QUALITY IN PRECISION GRINDING OF CARBON STEELS

机译：碳钢精密磨削表面质量的性质研究
- 作者：Reddy;K.H.Prasad;Nair;P.Kesavan;Ramamoorthy;B.
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
13.Study of Nano-tribology using Scanning Force Microscope

机译：用扫描力显微镜研究纳米摩擦学
- 作者：Tsunetaka Sumomogi;Toshiro Endo;Shinichi Matsuo
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
14.Study on Force Controlled Micro Grooving Using Burnishing Tools

机译：用抛光工具进行力控微刻槽的研究
- 作者：Masami Masuda;Yoshiharu Waki;Akihiro Inada;Atsushi Mutoh;Yukio Maeda
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
15.Study on Vibration OD-Blade Slicing with Air-Mist Working Fluid for Environment - Effect of Applied Vibration Amplitude on Slicing Characteristics -

机译：空气雾化工作液在环境中进行OD片的切片研究-施加振幅对切片特性的影响-
- 作者：Ken-ichi ISHIKAWA;Hitoshi SUWABE;Michio UNEDA
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
16.SURFACE GENERATION MECHANISM IN FLAT END MILLING

机译：平端铣削中的表面生成机理
- 作者：Shi H. Ryu;Deok K. Choi;Chong N. Chu
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
17.Surface modification by electrical discharge machining with titanium powder suspended in working fluid

机译：通过将钛粉悬浮在工作液中进行放电加工进行表面改性
- 作者：Katsushi Furutani;Akinori Saneto;Hideki Takezawa;Naotake Mohri;Hidetaka Miyake
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
- electrical discharge machining;
- surface modification;
- titanium carbide;
18.Surface topography assessment of textured mold and aesthetic quality of injection molded plastic surface

机译：纹理模具的表面形貌评估和注塑塑料表面的美学质量
- 作者：S. Hara;K. Yanagi;T. Endoh
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
19.The calibration of tilting and refractive index of specimen in confocal scanning microscopy

机译：共聚焦扫描显微镜中标本倾斜度和折射率的标定
- 作者：Jung Woo Seo;Sung Lim Park;Hyung Ryol Oh;Jun Hee Lee;Dae Gab Gweon
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
20.THE CHARACTERISATION OF ENGINE LINER WEAR USING NOVEL BEARING AREA CURVE PARAMETERS

机译：利用新型轴承面积曲线参数表征发动机缸套磨损
- 作者：David L. Butler;Liam A. Blunt;X. Jiang;Ken J. Stout
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
21.THE EFFECT OF PARALLEL MODULATION ON SUB- SURFACE DAMAGE

机译：并行调制对次表面损伤的影响
- 作者：W. Qu;M. H. Miller;A. Chandra
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
22.The Effects of High Feed Rate of Hardened Steel Milling upon Tool Life

机译：淬硬钢铣削的高进给速度对刀具寿命的影响
- 作者：Takashi Miyaguchi;Masami Masuda;Hiroyasu Iwabe;Etsuo Takeoka;Bjoern L. Wegener
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
23.The Effects of Interstitial Media on Thermal Condition Monitoring

机译：间隙介质对热状态监测的影响
- 作者：Yong Huang;Zichen Chen;James F. Cuttino
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
24.The Implementation of Simultaneous Trilateration to Measure Dynamic Three-Dimensional Contours Using the Laser Ball Bar

机译：激光球杆同时三边测量法测量动态三维轮廓的实现
- 作者：Tony L. Schmitz;John C. Ziegert
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
25.THE MECHANISM OF CBN QUILL IN SURFACE GRINDING

机译：立方氮化硼表面磨削的机理
- 作者：Qiusheng Yan;K. Tanaka;K. Syoji;T. Honoki
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
26.The study of ductile-brittle transition on micro-cutting of single crystal silicon

机译：单晶硅微切割延性脆性转变的研究
- 作者：Satoshi Kaji;Takayuki Goto;Tsunetaka Sumomogi;Masayoshi Nakamura
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
27.THE THREE-DIMENSIONAL SURFACE TOPOGRAPHIC CHARACTERISATION OF CONVENTIONAL AND SUPERABRASIVE GRINDING WHEELS

机译：常规磨削砂轮和三维磨削砂轮的三维拓扑特征
- 作者：David L. Butler;John A. Webster;Liam A. Blunt;Ken J. Stout
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
28.Thickness Correction for Edge Detection of Optical Coordinate Measuring Machines

机译：光学坐标测量机边缘检测的厚度校正
- 作者：Jiyou Fu;Robert Hocken
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
- optical CMM;
- OTF;
- edge shift;
- bi-directional measurement;
29.THREE-DIMENSIONAL MICROFORMING BY METAL JET

机译：金属射流的三维微成型
- 作者：Katsumi YAMAGUCHI;Katsuhiko SAKAI
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
30.Tolerance Allocations for Automated Insertion of Optical Components in the National Ignition Facility

机译：自动插入国家点火设施中的光学组件的公差分配
- 作者：Sally M. Bahowick;William R. Horton;Terence G. Sheridan;William S. Rorke;Donald S. Bartel
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
31.Traceability of CMM Measurements

机译：CMM测量的可追溯性
- 作者：Bas.W. van Dorp;Frank.L. Delbressine;Han Haitjema;Piet.H. Scheliekens
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
32.Tribo-chemical Smoothing of Diamond Film

机译：金刚石膜的摩擦化学平滑
- 作者：Kenichiro HORIO;Makoto HYOHDOH;Toshio KASAI
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
33.Truing and Dressing of Diamond Wheels for High Speed Grinding of Brittle Materials

机译：脆性材料高速磨削用金刚石砂轮的修整
- 作者：Han HUANG
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
34.Ultra-Smoothness Grinding of Fine Ceramics with #140-Mesh Grain Size Diamond Wheel

机译：＃140粒度金刚石砂轮对超细陶瓷的超光滑研磨
- 作者：Heiji YASUI;Go YAMAZAKI;Yutaka HIRAKI;Shigehiko SAKAMOTO;Masato SAKATA;Morihiko SAEKI;Akira HOSOKAWA
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
35.Vector Touch Sensor Probe

机译：矢量触摸传感器探头
- 作者：Shane Woody;Stuart Smith
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
36.Volumetric Error Measurement and Compensation Using the Vector Method

机译：矢量法的体积误差测量与补偿
- 作者：Charles Wang;Bob Griffin;John Janeczko
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
37.WATERJET IN-PROCESS DRESSING (1ST REPORT )

机译：WATERJET进行中的处理（第一份报告）
- 作者：Masatoshi HIRAO;Masaki IZAWA;Nobuaki IGUCHI;Keiichi SHIRASE;Kunio OOTANI;Takeshi YASUI
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年
38.Wear and Self-Dressing of Resin Bound Grinding Wheels

机译：树脂约束砂轮的磨损和自修
- 作者：Michele H. Miller;Thrinath S. Kakumanu
- 会议名称：《The Fourteenth Annual Meeting of the American Society for Precision Engineering, Oct 31-Nov 5, 1999, Monterey, California》 | 1999年