...
首页> 外文期刊>Water resources research >Interphase mass transfer in variable aperture fractures: Controlling parameters and proposed constitutive relationships
【24h】

Interphase mass transfer in variable aperture fractures: Controlling parameters and proposed constitutive relationships

机译:可变孔径裂缝中的相间传质:控制参数和建议的本构关系

获取原文
获取原文并翻译 | 示例
           

摘要

Interphase mass transfer in variable aperture fractures occurs in many problems where two immiscible fluids are present, such as dissolution of dense nonaqueous phase liquids into groundwater, dissolution of CO_2 in deep saline aquifers, and evaporation of trapped water by flowing gas during natural gas production. Typically, one fluid is entrapped by capillary forces and resides in immobilized regions whose distribution and geometry are controlled by the relative influence of capillary, gravitational, and viscous forces within the fracture. For the case of fractures bounded by a low porosity/permeability matrix, interphase mass transfer occurs predominantly owing to diffusive/advective transport from the entrapped phase interface into the phase flowing through the fracture. We explore the relative influence of the initial entrapped phase geometry and mean flowing phase velocities on the dissolution of the entrapped phase. Our systematic simulations use a percolation-based model of phase invasion and depth-averaged models of flow, transport, and mass transfer. The invasion model provides a physically based distribution of entrapped phase within the fracture and the mass transfer model implicitly calculates interphase mass transfer from discrete regions of entrapped phase without the need for empirical mass transfer relationships. Results demonstrate behavior across a wide range of initial entrapped phase distributions, with entrapped phase saturations ranging from zero to near the percolation threshold. Interfacial area evolves with a near-linear dependence on entrapped phase saturation during dissolution in each simulation, and fracture-scale intrinsic mass transfer rate coefficients exhibit a nonlinear dependence on Peclet number and a negligible dependence on entrapped phase saturation. These observations provide a basis for the development of constitutive relationships that quantify interphase mass transfer in variable aperture fractures as a function of entrapped phase saturation and flow rate; coarse-grid dissolution simulations using these constitutive relationships demonstrate good agreement with results from the high-resolution mechanistic simulations.
机译:可变孔径裂缝中的相间传质发生在许多问题中,其中存在两种不混溶的流体,例如致密的非水相液体溶解到地下水中,CO_2在深盐水层中的溶解以及在天然气生产过程中流动的气体所捕集的水分的蒸发。通常,一种流体被毛细作用力截留,并停留在固定的区域,其位置和几何形状受裂缝内毛细作用,重力和粘性作用力的相对影响而控制。对于以低孔隙度/渗透率矩阵为边界的裂缝,相间传质主要是由于从截留的相界面到流过裂缝的相的扩散/平流传输。我们探索了初始夹带相几何形状和平均流动相速度对夹带相溶解的相​​对影响。我们的系统模拟使用基于渗透的相入侵模型和深度平均模型的流动,传输和传质模型。侵入模型提供了裂缝内包裹相的基于物理的分布,并且传质模型隐含地从离散的包裹相区域计算相间传质,而无需经验传质关系。结果表明,在广泛的初始捕获相位分布范围内,捕获相位的饱和度范围从零到接近渗透阈值。在每个模拟过程中,界面区域在溶解过程中对夹带的相饱和度具有近乎线性的依赖性,而裂缝尺度的固有传质速率系数表现出对Peclet数的非线性依赖性,而对夹带的相饱和度的影响则可忽略不计。这些观察结果为本构关系的发展奠定了基础,本构关系量化了可变孔径裂缝中的相间传质,作为夹带相饱和度和流速的函数。使用这些本构关系的粗网格溶解模拟表明,与高分辨率机械模拟的结果吻合良好。

著录项

  • 来源
    《Water resources research》 |2009年第8期|W08436.1-W08436.21|共21页
  • 作者单位

    Department of Civil and Environmental Engineering, University of California, Irvine, CA 92697, USA;

    Department of Civil, Environmental, and Architectural Engineering, University of Colorado at Boulder, Boulder, CO 80309, USA;

    Sandia National Laboratories, P.O. Box 5800, Albuquerque, NM 87185, USA;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号