Enhanced adsorption of Cd (Ⅱ) on a hydrous Al (Ⅲ) floc in the presence of a modified form of polyethylenimine

摘要

A polymer modified with succinic anhydride has been investigated for the adsorption of cadmium (Ⅱ) on a freshly precipitated aluminium (Ⅲ) hydroxide floc. The proportion of chelate attached to the polymer is varied to determine the relationship between carboxyl and amino groups on the polyelectrolyte, in terms of enhanced adsorption of cadmium (Ⅱ) on a hydrous aluminium floc. The presence of polyelectrolyte enhanced the adsorption of 3.3 ppm Cd (Ⅱ) on a 333 ppm Al (Ⅲ) floc at every concentration of polyelectrolyte investigated. The proportion of succinic anhydride attached to the polymer had an impact on the increased adsorption of Cd (Ⅱ) on an Al (Ⅲ) floc observed. A decreasing proportion of succinic anhydride to polymer resulted in a decrease in the amount of cadmium adsorbed on the floc. Above pH 8, a decrease in the % Cd (Ⅱ) adsorbed on the floc and % Al (Ⅲ) retained within the floc decreases with the presence of polyelectrolyte as a result of the formation of soluble Cd-Polyethylenimine-succinic acid (PEISA) complexes. When the Al-PEISA combination was applied to a complex matrix where Cd (Ⅱ), Cu (Ⅱ) and Ni (Ⅱ) ions competed for adsorption, enhanced adsorption was observed for Cd (Ⅱ) and Ni (Ⅱ). At pH 7, dissolution of the floc observed with the addition of discrete chelates was not observed with the addition of polyelectrolytes.