...
首页> 外文期刊>Water Research >Does mechanical stress cause microplastic release from plastic water bottles?
【24h】

Does mechanical stress cause microplastic release from plastic water bottles?

机译:机械应力会导致塑料水瓶中的塑料释放吗?

获取原文
获取原文并翻译 | 示例
           

摘要

Plastic particle ingestion has become of concern as a possible threat to human health. Previous works have already explored the presence of microplastic (MP) in bottled drinking water as a source of MP intake. Here, we consider the release of MP particles from single-use PET mineral water bottles upon exposure to mechanical stress utilizing SEM plus EDS, which allows the implementation of morphological and elemental analysis of the plastic material surface and quantification of particle concentrations in sample water. The aim of this study was to better evaluate the sources of MP intake from plastic bottles, especially considering the effect of daily use on these bottles such as the abrasion of the plastic material. For that, we analysed MP release of PET bottlenecks and HDPE caps on their surfaces after a series of bottle openings/closings (1 x, 10 x, 100 x). Furthermore, we investigated, if the inner surface of the PET bottles released MPs, counted particle increase of the water and identified MPs in the PET bottled water after exposing the bottles to mechanical stress (squeezing treatment; none, 1 min, 10 min). The results showed a considerable increase of MP particle occurrence on the surface of PET and HDPE material (bottlenecks and caps) after opening and closing the bottles. After 100 times the effect was impressive, especially on caps. Moreover, great differences exist in cap abrasion between brands which uncovers a discrepancy in plastic behavior of brands. Interestingly, particle concentrations in the bottled mineral water did not significantly increase after exposure to mechanical stress (squeezing treatment). The morphological analysis of the inner wall surface of the bottles supported this observation, as no stress cracks could be detected after the treatment, implying that the bottles itself are not a consistent source of MP particles after this extent of mechanical stress. However, chances of MP ingestion by humans increase with frequent use of the same single-use plastic bottle, though only from the bottleneck-cap system. (C) 2019 Elsevier Ltd. All rights reserved.
机译:摄入塑料颗粒已成为人们健康的潜在威胁。以前的工作已经探索了瓶装饮用水中微量塑料(MP)的存在,以此作为MP摄入的来源。在这里,我们考虑使用SEM和EDS在机械应力作用下从一次性PET矿泉水瓶中释放MP颗粒,从而可以对塑料材料表面进行形态学和元素分析,并量化样品水中的颗粒浓度。这项研究的目的是更好地评估塑料瓶中MP的摄入来源,特别是考虑到日常使用对这些瓶的影响,例如塑料材料的磨损。为此,我们分析了一系列瓶子开/关(1 x,10 x,100 x)后,PET瓶颈和HDPE瓶盖在其表面上的MP释放。此外,我们研究了如果PET瓶的内表面释放了MP,则对瓶子进行机械应力(挤压处理;无,1分钟,10分钟)后,计算水的颗粒增加并确定PET瓶装水中的MP。结果表明,在打开和关闭瓶子之后,PET和HDPE材料(瓶颈和瓶盖)表面MP颗粒的出现显着增加。经过100次后,效果令人印象深刻,尤其是在帽子上。此外,品牌之间在瓶盖磨损方面存在巨大差异,这揭示了品牌可塑性的差异。有趣的是,瓶装矿泉水中的颗粒浓度在受到机械应力(挤压处理)后并没有显着增加。瓶子内壁表面的形态学分析支持了这一观察结果,因为在处理后无法检测到应力裂纹,这表明在这种程度的机械应力之后,瓶子本身并不是MP颗粒的稳定来源。然而,尽管仅通过瓶颈盖系统,但频繁使用相同的一次性塑料瓶,人摄入MP的机会增加。 (C)2019 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号