...
首页> 外文期刊>Thin Solid Films >Optimisation of amorphous and polymorphous thin silicon layers for the formation of the front-side of heterojunction solar cells on p-type crystalline silicon substrates
【24h】

Optimisation of amorphous and polymorphous thin silicon layers for the formation of the front-side of heterojunction solar cells on p-type crystalline silicon substrates

机译:优化非晶和多晶薄硅层,以在p型晶体硅衬底上形成异质结太阳能电池的正面

获取原文
获取原文并翻译 | 示例
           

摘要

In this study, we investigate the properties of n-doped amorphous silicon layer a-Si:H(n) combined with intrinsic thin silicon film deposited on high quality p-type CZ crystalline silicon, aiming at developing high performance heterojunction solar cells. The interface characteristics are analysed using Transmission Electron Microscopy TEM and capacitance measurements versus temperature and frequency. The insertion of a thin silicon film at the interface deposited under conditions of polymorphous material drives to a different structure of the interface. Our best front side heterojunction solar cells achieve 15% efficiency on 25 cm~2 , with an open-circuit voltage of 634 mV. A maximum open-circuit voltage of 676 mV has also been obtained on polymorphous/crystalline heterojunctions with a high quality rear local BSF, indicating the excellent interface passivation achieved with the intrinsic layer deposited in conditions of polymorphous silicon. This experimental study reveals the clear potential of p-type substrates for the development of amorphous/crystalline heterojunctions solar cells.
机译:在这项研究中,我们研究了n掺杂非晶硅层a-Si:H(n)与沉积在高质量p型CZ晶体硅上的本征薄膜相结合的特性,旨在开发高性能异质结太阳能电池。使用透射电子显微镜TEM分析界面特性,并测量电容与温度和频率的关系。在多态材料的条件下沉积的界面处插入薄硅膜会驱动界面的不同结构。我们最好的正面异质结太阳能电池在25 cm〜2的效率下具有15%的效率,开路电压为634 mV。在具有高质量后部局部BSF的多晶/异质结上也获得了676 mV的最大开路电压,表明在多晶硅条件下沉积的本征层实现了出色的界面钝化。这项实验研究揭示了p型衬底在非晶/晶体异质结太阳能电池开发中的明显潜力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号