首页> 外文期刊>Renewable energy >Criteria for the economic planning of a low power hydroelectric plant
【24h】

Criteria for the economic planning of a low power hydroelectric plant

机译:低功率水力发电厂经济计划的标准

获取原文
获取原文并翻译 | 示例
           

摘要

This paper presents an original method for finding the most economically advantageous choice for the installation of micro hydroelectric plants. More precisely, the paper that follows is to be considered in a context defined as "problematic" by those who have the job of constructing water-flow plants with only small head and modest flow rates. With these initial data one can see immediately that the specific energy of the fluid is low and it is therefore necessary to elaborate large masses of water in order to obtain work, and therefore a return, to render such an investment profitable. Traditional plant solutions using Kaplan or Francis type turbines must be rejected because of the high levels of initial investments. Much more simple configurations must be analysed, such as plants with propeller turbines or Michell-Banki turbines, in order to reduce the investment costs. The general methodology applied provides a powerful decision-making instrument which is able to define the best plant configuration. The method is based on the use of economic profitability indicators, such as the Net Present Value (NPV), calculated using the plant project parameters, the nominal flow rate and head, and the particular hydrologic characteristics of the site, such as the type of distribution, the average value and the standard deviation of the flow rates in the course of water supplying the plant. A numerical example for a plant situated in the Emilian Appennine Range then makes it possible to demonstrate the simplicity and applicability of the proposed method.
机译:本文介绍了一种寻找安装微型水力发电厂最经济的选择的原始方法。更准确地说,以下论文将被那些从事仅以小水头和小流量建造水力发电厂的人定义为“有问题”的背景。利用这些初始数据,人们可以立即看到流体的比能低,因此必须精加工大量的水才能获得功夫,从而获得回报,从而使这种投资有利可图。由于初始投资水平高,必须拒绝使用Kaplan或Francis型涡轮机的传统工厂解决方案。为了降低投资成本,必须分析许多更简单的配置,例如带有螺旋桨涡轮机或Michell-Banki涡轮机的工厂。所采用的通用方法论提供了一种强大的决策工具,能够确定最佳的工厂配置。该方法基于使用经济获利能力指标(例如,净现值(NPV)),该指标是使用工厂项目参数,标称流量和水头以及站点的特定水文特性(例如水库类型)计算得出的供水过程中流量的分布,平均值和标准偏差。然后,通过一个位于Emilian Appennine范围内的工厂的数值示例,可以证明所提出方法的简单性和适用性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号