首页> 外文期刊>Nuclear science and engineering >MC~2-3: Multigroup Cross Section Generation Code for Fast Reactor Analysis
【24h】

MC~2-3: Multigroup Cross Section Generation Code for Fast Reactor Analysis

机译:MC〜2-3:用于快速反应器分析的多组截面生成代码

获取原文
获取原文并翻译 | 示例
           

摘要

This paper presents the methods and performance of the MC2-3 code, which is a multigroup cross-section generation code for fast reactor analysis, developed to improve the resonance self-shielding and spectrum calculation methods of MC2-2 and to simplify the current multistep schemes generating region-dependent broad-group cross sections. Using the basic neutron data from ENDF/B data files, MC2-3 solves the consistent P-1 multigroup transport equation to determine the fundamental mode spectra for use in generating multigroup neutron cross sections. A homogeneous medium or a heterogeneous slab or cylindrical unit cell problem is solved in ultrafine (2082) or hyperfine (similar to 400 000) group levels. In the resolved resonance range, pointwise cross sections are reconstructed with Doppler broadening at specified temperatures. The pointwise cross sections are directly used in the hyperfine group calculation, whereas for the ultrafine group calculation, self-shielded cross sections are prepared by numerical integration of the pointwise cross sections based upon the narrow resonance approximation. For both the hyperfine and ultrafine group calculations, unresolved resonances are self-shielded using the analytic resonance integral method. The ultrafine group calculation can also be performed for a two-dimensional whole-core problem to generate region-dependent broad-group cross sections. Verification tests have been performed using the benchmark problems for various fast critical experiments including Los Alamos National Laboratory critical assemblies; Zero-Power Reactor, Zero-Power Physics Reactor, and Bundesamt fur Strahlenschutz experiments; Monju start-up core; and Advanced Burner Test Reactor. Verification and validation results with ENDF/B-VII.0 data indicated that eigenvalues from MC2-3/DIF3D agreed well with Monte Carlo N-Particle5 MCNP5 or VIM Monte Carlo solutions within 200 pcm and regionwise one-group fluxes were in good agreement with Monte Carlo solutions.
机译:本文介绍了MC2-3代码的方法和性能,它是用于快速反应堆分析的多组截面生成代码,旨在改进MC2-2的共振自屏蔽和频谱计算方法并简化当前的多步法生成区域相关的宽群横截面的方案。使用来自ENDF / B数据文件的基本中子数据,MC2-3求解了一致的P-1多组输运方程,以确定用于生成多组中子截面的基本模式谱。在超精细(2082)或超精细(类似于40万)组级别中解决了均质介质或异质平板或圆柱状晶胞问题。在分辨的共振范围内,在指定温度下通过多普勒展宽重建点状横截面。逐点横截面直接用于超精细群计算,而对于超精细群计算,通过基于窄共振近似的逐点横截面的数值积分来准备自屏蔽横截面。对于超精细和超精细基团计算,未解析的共振使用解析共振积分方法进行自我屏蔽。还可以对二维全核问题执行超精细群计算,以生成与区域相关的宽群横截面。已经针对各种快速关键实验(包括洛斯阿拉莫斯国家实验室关键组件)使用基准测试问题进行了验证测试;零功率反应堆,零功率物理反应堆和德国联邦议院的Strahlenschutz实验;文殊创业核心;和高级燃烧器测试反应堆。使用ENDF / B-VII.0数据进行的验证和确认结果表明,MC2-3 / DIF3D的特征值与200 pcm之内的Monte Carlo N-Particle5 MCNP5或VIM Monte Carlo解非常吻合,并且区域性单组通量与蒙特卡洛解决方案。

著录项

  • 来源
    《Nuclear science and engineering》 |2017年第3期|268-290|共23页
  • 作者

    Lee Changho; Yang Won Sik;

  • 作者单位
  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号