Plastic collapse and LBB behavior of statically indeterminate piping system subjected to a static load

摘要

The plastic collapse and LBB behavior of statically indeterminate piping system were investigated in this study, compared with those of the statically determinate piping system. Special attention was paid to evaluate the crack opening displacement after a crack penetrated wall thickness. The main results obtained were as follows: l. The reduction of ultimate strength caused by a crack was relatively small in the statically indeterminate piping system. The main reason is thought to be tat a sufficient redistribution of the bending moment occurs in this system. 2. A method to evaluate the crack opening displacement after crack penetration in a pipe with a non-penetrating crack was proposed. Form this method, it was known that the crack opening displacement could be evaluated by using the incremental plastic rotation angle. 3. The acceptable defect size considering the deformation of a pipe was estimated by comparing the plastic moment at the defective part and the gross yielding moment at the non-defective part.