首页> 外文期刊>Materials science forum >Study of Temperature Effect on the High Performance of OCTG Used for Deep and Ultra-Deep Well
【24h】

Study of Temperature Effect on the High Performance of OCTG Used for Deep and Ultra-Deep Well

机译:温度对深井和超深井OCTG高性能影响的研究

获取原文
获取原文并翻译 | 示例
           

摘要

With the exploitation of deep well, ultra-deep well, thermal recovery Well and Geothermal Well, the temperature of tubing and casing is increasing constantly. The influence degree of temperature on tubing and casing material performance has attracted much attention in the design of tubular strings. The experimental study on the yield strength and tensile strength of tubular materials with temperature change is carried out, which includes C110, 140ksi, P110 and S13Cr110. In this paper, the yield strength correction coefficient of tubular material is defined, and the material performance model of different steel grade tubular material with temperature change is established. The paper describes the influence of underground high temperature on the design of tubular strings and shows that the yield strength of tubular material will decrease under high temperature. This directly affects the safety parameter of tubing and casing design, and greatly impact on the safety reliability and service life of the tubular strings. This paper points out the defects which exist in the current API formulas, when calculating the force of the tubular string. It is suggested that the yield strength at high temperature should be used as the design basis for deep well and ultra-deep well when the underground temperature is high. The results can be used to guide the design and check of tubular strings under high temperature and high-pressure gas well.Keywords:deep and ultra-deep well; special performance tubing and casing; high temperature; yield strength; tubular strings integrity;OCTG.
机译:随着深井,超深井,热采井和地热井的开采,油管和套管温度不断升高。温度对油管和套管材料性能的影响程度已引起人们对管柱设计的关注。对C110、140ksi,P110和S13Cr110等随温度变化的管状材料的屈服强度和拉伸强度进行了实验研究。定义了管状材料的屈服强度校正系数,建立了随温度变化的不同钢种管状材料的材料性能模型。本文描述了地下高温对管柱设计的影响,并表明在高温下管材的屈服强度会降低。这直接影响油管和套管设计的安全参数,并极大地影响管柱的安全可靠性和使用寿命。本文指出了计算管柱受力时当前API公式中存在的缺陷。建议在地下温度较高时,将高温屈服强度作为深井和超深井的设计依据。该结果可为指导高温高压气井管柱的设计和检验提供参考。特殊性能的油管和套管;高温;屈服强度管柱完整性; OCTG

著录项

  • 来源
    《Materials science forum》 |2019年第2期|797-807|共11页
  • 作者单位

    Research Center for OCTG and Pipe Strings Tubular Goods Research Institute of China National Petroleum Corporation;

    Research Center for OCTG and Pipe Strings Tubular Goods Research Institute of China National Petroleum Corporation;

    Research Center for OCTG and Pipe Strings Tubular Goods Research Institute of China National Petroleum Corporation;

    Research Center for OCTG and Pipe Strings Tubular Goods Research Institute of China National Petroleum Corporation;

    State Key Laboratory of Performance and Structural Safety for Petroleum Tubular Goods and Equipment Materials CNPC Tubular Goods Research Institute;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Yield Strength; Casing; Ultra-Deep Well; Deep Well; High Temperature; Tubular Strings Integrity; High Performance OCTG;

    机译:屈服强度;套管;超深井;深井;高温;小管完整性;高性能OCTG;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号