首页> 外文期刊>Journal of the Mechanics and Physics of Solids >A Peierls criterion for the onset of deformation twinning at a crack tip
【24h】

A Peierls criterion for the onset of deformation twinning at a crack tip

机译:裂纹尖端变形孪生开始的Peierls准则

获取原文
获取原文并翻译 | 示例
           

摘要

A criterion for the onset of deformation twinning (DT) is derived within the Peierls framework for dislocation emission from a crack tip due to Rice (J. Mech. Phys. Solids 40(2) (1992) 239). The critical stress intensity factor (SIF) is obtained for nucleation of a two-layer microtwin, which is taken to be a precursor to DT. The nucleation of the microtwin is controlled by the unstable twinning energy gamma(ut), a new material parameter identified in the analysis. gamma(ut) plays the same role for DT as gamma(us), the unstable stacking energy introduced by Rice, plays for dislocation emission. The competition between dislocation emission and DT at the crack tip is quantified by the twinning tendency T defined as the ratio of the critical SIFs for dislocation nucleation and microtwin formation. DT is predicted when T > 1 and dislocation emission when T < 1. For the case where the external loading is proportional to a single load parameter, T is proportional to rootgamma(us)/gamma(ut). The predictions of the criterion are compared with atomistic simulations for aluminum of Hai and Tadmor (Acta Mater. 51 (2003) 117) for a number of different crack configurations and loading modes. The criterion is found to be qualitatively exact for all cases, predicting the correct deformation mode and activated slip system. Quantitatively, the accuracy of the predicted nucleation loads varies from 5% to 56%. The sources of error are known and may be reduced by appropriate extensions to the model. (C) 2003 Elsevier Science Ltd. All rights reserved. [References: 35]
机译:在Peierls框架内推导了变形孪晶(DT)的发作标准,用于从莱斯引起的裂纹尖端释放位错(J. Mech。Phys。Solids 40(2)(1992)239)。获得了两层微孪晶成核的临界应力强度因子(SIF),它被认为是DT的前体。微孪晶的形核由不稳定的孪晶能γ(ut)控制,该不稳定的孪生能γ是分析中确定的新材料参数。 γ对DT的作用与赖斯引入的不稳定的堆积能gamma(us)在位错发射中的作用相同。裂纹尖端处位错发射与DT之间的竞争由孪生趋势T量化,孪生趋势T定义为位错成核和微孪晶形成的关键SIF的比率。当T> 1时预测DT,而当T <1时预测位错发射。对于外部载荷与单个载荷参数成比例的情况,T与rootgamma(us)/ gamma(ut)成比例。将该标准的预测与Hai和Tadmor的铝的原子性模拟(Acta Mater。51(2003)117)进行了比较,得出了许多不同的裂纹形态和加载模式。发现该标准对于所有情况在质量上都是精确的,可以预测正确的变形模式和激活的滑移系统。定量地,预测成核载荷的准确性在5%到56%之间变化。错误的来源是已知的,可以通过适当扩展模型来减少。 (C)2003 Elsevier ScienceLtd。保留所有权利。 [参考:35]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号