...
首页> 外文期刊>Journal of the American Chemical Society >Low-Molecular-Weight Gelators: Elucidating the Principles of Gelation Based on Gelator Solubility and a Cooperative Self-Assembly Model
【24h】

Low-Molecular-Weight Gelators: Elucidating the Principles of Gelation Based on Gelator Solubility and a Cooperative Self-Assembly Model

机译:低分子量胶凝剂:阐明基于胶凝剂溶解度和合作的自组装模型的胶凝原理

获取原文
获取原文并翻译 | 示例
           

摘要

This paper highlights the key role played by solubility in influencing gelation and demonstrates that many facets of the gelation process depend on this vital parameter. In particular, we relate thermal stability (T_(gel)) and minimum gelation concentration (MGC) values of small-molecule gelation in terms of the solubility and cooperative self-assembly of gelator building blocks. By employing a van't Hoff analysis of solubility data, determined from simple NMR measurements, we are able to generate T_(calc) values that reflect the calculated temperature for complete solubilization of the networked gelator. The concentration dependence of T_(calc) allows the previously difficult to rationalize "plateau-region" thermal stability values to be elucidated in terms of gelator molecular design. This is demonstrated for a family of four gelators with lysine units attached to each end of an aliphatic diamine, with different peripheral groups (Z or Boc) in different locations on the periphery of the molecule. By tuning the peripheral protecting groups of the gelators, the solubility of the system is modified, which in turn controls the saturation point of the system and hence controls the concentration at which network formation takes place. We report that the critical concentration (C_(crit)) of gelator incorporated into the solid-phase sample-spanning network within the gel is invariant of gelator structural design. However, because some systems have higher solubilities, they are less effective gelators and require the application of higher total concentrations to achieve gelation, hence shedding light on the role of the MGC parameter in gelation. Furthermore, gelator structural design also modulates the level of cooperative self-assembly through solubility effects, as determined by applying a cooperative binding model to NMR data. Finally, the effect of gelator chemical design on the spatial organization of the networked gelator was probed by small-angle neutron and X-ray scattering (SANS/SAXS) on the native gel, and a tentative self-assembly model was proposed.
机译:本文重点介绍了溶解度在影响胶凝过程中所起的关键作用,并证明了胶凝过程的许多方面都取决于这一重要参数。特别地,我们根据胶凝剂构件的溶解度和协同自组装,将小分子胶凝的热稳定性(T_(gel))和最小胶凝浓度(MGC)值联系起来。通过使用从简单的NMR测量确定的溶解度数据的Van't Hoff分析,我们能够生成T_(calc)值,该值反映了计算出的温度,可完全溶解网络化的胶凝剂。 T_(calc)的浓度依赖性使得先前难以合理化的“高原区域”热稳定性值可以根据胶凝剂分子设计加以阐明。对于四个胶凝剂家族证明了这一点,其中赖氨酸单元连接到脂肪族二胺的每个末端,在分子外围的不同位置具有不同的外围基团(Z或Boc)。通过调节胶凝剂的外围保护基团,改变了系统的溶解度,这又控制了系统的饱和点,因此控制了形成网络的浓度。我们报告凝胶中固相样品跨度网络中掺入的胶凝剂的临界浓度(C_(crit))是胶凝剂结构设计的不变性。但是,由于某些系统具有较高的溶解度,因此它们的胶凝剂效率较低,并且需要使用较高的总浓度才能实现胶凝作用,因此可以避免MGC参数在胶凝作用中的作用。此外,胶凝剂的结构设计还通过溶解度效应调节了协同自组装的水平,这是通过对NMR数据应用协同结合模型来确定的。最后,通过在天然凝胶上的小角度中子和X射线散射(SANS / SAXS)探索了胶凝剂化学设计对网络化胶凝剂空间组织的影响,并提出了一个初步的自组装模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号