首页> 外文期刊>Journal of power sources >Ionic liquid-polymer gel electrolytes based on morpholinium salt and PVdF(HFP) copolymer
【24h】

Ionic liquid-polymer gel electrolytes based on morpholinium salt and PVdF(HFP) copolymer

机译:基于吗啉鎓盐和PVdF(HFP)共聚物的离子液体聚合物凝胶电解质

获取原文
获取原文并翻译 | 示例
           

摘要

New ionic liquid—polymer gel electrolytes (IPGEs) are prepared from N-ethyl-N-methylmorpholinium bis(trifluorornethanesulfonyl)imide (Mor_(1,2)TFSI) and poly(vinylidene fluoride)-hexafluoropropylene copolymer (PVdF(HFP)). To investigate the effect of propylene carbonate (PC) on the ionic conductivity of the IPGEs, the preparation methods are roughly divided into two groups according to the presence or absence of PC. The ionic conductivity for each IPGE is measured with increasing temperature and changing weight ratio of Mor_(1,2)TFSI. The results show that the ionic conductivity increases as the temperature and weight ratio of the Mor_(1,2)TFSI increase, and that the added PC improves the ionic conductivity of the IPGEs. In addition, thermogravimetric analysis and the data from infrared spectroscopy demonstrate the thermal stability of each IPGE and the presence of PC in the polymer network. Although the IPGEs that contain PC display high conductivity (~1.1 x 10~(-2) S cm~(-1)) at 60℃, they are thermally unstable.
机译:新的离子液体聚合物凝胶电解质(IPGE)由N-乙基-N-甲基吗啉双(三氟乙烷磺酰基)酰亚胺(Mor_(1,2)TFSI)和聚偏二氟乙烯-六氟丙烯共聚物(PVdF(HFP))制备。为了研究碳酸亚丙酯(PC)对IPGEs离子电导率的影响,根据PC的存在与否将制备方法大致分为两组。随着温度的升高和Mor_(1,2)TFSI重量比的变化,测量每个IPGE的离子电导率。结果表明,随着Mor_(1,2)TFSI的温度和重量比的增加,离子电导率增加,并且添加的PC提高了IPGE的离子电导率。此外,热重分析和红外光谱数据证明了每个IPGE的热稳定性以及聚合物网络中PC的存在。尽管含有PC的IPGE在60℃时显示出高电导率(〜1.1 x 10〜(-2)S cm〜(-1)),但它们是热不稳定的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号