MEASUREMENT OF WIRE DIAMETER BY OPTICAL DIFFRACTION

摘要

A combined interference and diffraction pattern, in the form of equidistant interference fringes, resulting from illuminating a vertical metallic wire by a laser beam is analyzed to measure the diameter of four standard wires. The diameters range from 170 to 450 μm. It is found that the error in the diameter measurements increases for small metallic wires and for small distances between the wire and the screen due to scattering effects. The intensity of the incident laser beam was controlled by a pair of sheet polaroids to minimize the scattered radiation. The used technique is highly sensitive, but requires controlled environmental conditions and absence of vibration effects. The expanded uncertainty is calculated and found to decrease from +- 1.45 mm for the wire of nominal diameter of 170 μm, to +- 0.57 μm for the diameter, 450 μm.